The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools
Old May 26, 2013, 02:54 AM   #1
chrisintexas
Senior Member
 
Join Date: September 11, 2012
Posts: 219
gun weight in 3 inch barrel where you feel shooting .357 magnum felt recoil is accept

what would be the gun weight in 3 inch barrel revolver where you feel shooting .357 magnum felt recoil is acceptable? Is there a weight where felt recoil goes down significantly? thanks.
chrisintexas is offline  
Old May 26, 2013, 06:20 AM   #2
Carmady
Senior Member
 
Join Date: February 26, 2013
Posts: 252
In my limited experience "good" grips are more important than more weight.

I had two .357s, a 39oz 6" M-19 with factory wood grips, and a 22+oz 2 1/8" M-60 with UM's Combat grips.

The same .357 loads were much more comfortable to shoot from the M-60.
Carmady is offline  
Old May 26, 2013, 08:19 AM   #3
Ozzieman
Senior Member
 
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 5,027
What feels acceptable to me might not for you and this can depend a lot on experience. I think you should look for the heaviest gun that you can comfortably carry then go from there.
357 mags have a lot of recoil when you get into light guns but with enough practice you can get over the recoil.
Is this for SD or just the home and target?
For the 357 I would not go less than a Ruger 101 or 100 then get a good set of grips that fit your hand. If the mags are too much then stuff it with +P 38’s.
__________________
“Peace is that brief glorious moment in history when everybody stands around reloading.” – Thomas Jefferson.

Politician's are like diapers.
You need to change them often,,,,, for the same reason!
Ozzieman is offline  
Old May 26, 2013, 08:22 AM   #4
WC145
Senior Member
 
Join Date: October 18, 2008
Location: Downeast Maine
Posts: 1,479
If the barrel length and ammunition are the same then the larger, heavier framed gun will move less movement under recoil since more energy is spent moving the greater mass. For example - let's say 100lbs of force moves an object weighing 10lbs 5 feet in 1 second, that same amount of force will move a lighter object further and a heavier object shorter distances in the same amount of time. So, a 3" large frame revolver weighing 45oz will move less under recoil than a 3" small frame revolver weighing 15oz when shooting the same load. Frame geometry and grip shape and material will make a difference in how the recoil feels to the shooter - rubber grips will absorb some of the impact where wood will not, etc. - but that doesn't change the physics of force vs mass.

Beyond that it is what you, the shooter, are comfortable with. I don't mind shooting my 327NG with full house magnum loads, I don't enjoy it, but I don't mind it. Put that same ammo in a 6" steel M27 and I'll shoot it all day and have a good time doing it.
__________________
“Never give in. Never give in. Never, never, never, never—in nothing, great or small, large or petty—never give in, except to convictions of honour and good sense. Never yield to force. Never yield to the apparently overwhelming might of the enemy.”

Last edited by WC145; May 26, 2013 at 08:28 AM.
WC145 is offline  
Old May 26, 2013, 12:10 PM   #5
weblance
Senior Member
 
Join Date: October 3, 2012
Posts: 653
I have a Ruger LCR, and a couple Ruger SP101s and a GP100. Shooting full power 357s out of the 17 oz LCR isnt pleasant. From the 25 oz. 2" SP101, they are much better, and from the 40 oz. 4" GP100, they are mild. So somewhere between 17 oz and 40 oz is your answer.
weblance is offline  
Old May 26, 2013, 12:47 PM   #6
Buzzcook
Senior Member
 
Join Date: November 29, 2007
Location: Everett, WA
Posts: 5,651
I'd say a 30+oz. K-frame would be the minimum for my comfort.

My personal preference is to get the heaviest gun I can easily handle.
Buzzcook is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06937 seconds with 9 queries