The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old April 17, 2013, 11:52 PM   #1
old fart
Senior Member
 
Join Date: May 24, 2009
Posts: 269
speckled rust

i recently bought a nef r-92 revolver, got a good deal at $85. it had little places of rust here and there. i used rem oil, wd 40, and 0000 wool, the rust came off the frame and left little dark specs in its place. is this rust too?, its almost black in color. the frame is a blue parkerized type coating that nef put on it, with a rough dull texture. the cylinder is shiny blue with specs of rust here and there, i used the 0000 wool and oil but the small rust won't come off. i have run my nail across the cylinder and i can't feel the rust but it is visible. what else can i do to get the rust off the cylinder? i hope someone can help, thanks
old fart is offline  
Old April 18, 2013, 12:10 AM   #2
stealintv
Senior Member
 
Join Date: April 20, 2010
Location: south chi-town burbs
Posts: 107
Sounds like pitting to me. The rust ate a tiny crater in the metal. Happened to my 1911s slide. U can probably search youtube for how to refinish metal surfaces. Being that its a cheap pistol, it may be a project you may get your hands dirty in. Otherwise, someone more experienced may need to do this. I imagine the job would cost more than you paid for the firearm, though.
__________________
Concealed Carry in Illinois!
The 50th state to recognize the Bill of Rights...
www.illinoiscarry.com
stealintv is offline  
Old April 18, 2013, 12:17 AM   #3
old fart
Senior Member
 
Join Date: May 24, 2009
Posts: 269
there isn't any pits, the surface is smooth i even used a toothpick to be sure. it just small black specs in the finish which is a parkerized or some type. the cylinder i can see rust but it too is smooth, the cylinder has regular dark shiny bluing on it.. thanks
old fart is offline  
Old April 18, 2013, 07:30 AM   #4
dahermit
Senior Member
 
Join Date: October 28, 2006
Location: South Central Michigan...near Ohio, Indiana.
Posts: 3,505
There is no such thing as "surface rust"...it is a matter of degree, progresses from very minor to making the gun completely unusable and un-salvageable. When rust (Iron Oxide), forms the surface is pitted. That can be confirmed if looked at under magnification. If that "minor" rust bothers you, there are ways (chemical and electrolysis), to remove the Iron Oxide...but there will be a pit where it was albeit, it may be very small.
Therefore, if the gun was mine, I would try to stop obsessing about minor rust and vow to take better care of my guns. If the rust still bothered me, I would have the gun refinished.
__________________
Sometimes you get what you pay for, sometimes you only pay more for what you get.
Three shots are not a "group"...they are a "few".

If the Bible is the literal, infallible, unerring word of God...where are all those witches I am supposed to kill?

Last edited by dahermit; April 18, 2013 at 07:35 AM.
dahermit is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:28 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06265 seconds with 9 queries