The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 16, 2013, 04:06 AM   #1
Skarekrow88
Senior Member
 
Join Date: March 26, 2013
Location: Alabama
Posts: 133
Classic Lee Loader .45 Auto Question

I know that the website says "Please note: the Classic Lee Loader neck sizes only. This is not recommended for semi, pump and lever action guns." but there is no neck on a .45 Auto case (or any of the pistol rounds they make the classic loaders for) at least not like there is on rifle cases. I am new to reloading and have inherited 5,000 .45 Auto brass casings but dont have any reloading equipment. I want to start small and am very interested in a Classic Lee Loader. Will I be able to fire these reloads through my automatic firearms or will they be unreliable? Why would they make a .45 Auto reloading kit that is not recommended to be fired in automatic firearms?
__________________
"A life fought for others is a life worth living"

"A good death is its own reward"
Skarekrow88 is offline  
Old April 16, 2013, 07:41 AM   #2
444
Senior Member
 
Join Date: November 20, 2000
Location: Ohio
Posts: 3,727
Just as a guess, I would say that the instructions are generic. As you point out, the .45 ACP doesn't have a neck, so it isn't an issue for you.

The Classic Lee Loader will work fine in a .45 auto. I have loaded many thousands of rounds using a Lee Loader. And, the Lee Loader is a great way to start in the reloading aspect of the hobby. You start small, and can easily add some pieces, over time, to make the whole process more versitile.

The only thing you need to begin loading with the Lee Loader are powder, bullets, primers, cases, and a loading manual. In the future, you can add things like a hand priming tool to speed up the priming process. A powder scale and a powder measure so you can try different loads other than the ones you can do with the dipper. You can buy a dial caliper so that you can measure over all length as well as case length and the amount of taper crimp you are applying. Loading blocks. A little spray case lube would make things a little easier..............

Point is that you get everything you NEED with the Classic Lee Loader kit, but it can be expanded over time.
__________________
You know the rest. In the books you have read
How the British Regulars fired and fled,
How the farmers gave them ball for ball,
From behind each fence and farmyard wall,
Chasing the redcoats down the lane,
Then crossing the fields to emerge again
Under the trees at the turn of the road,
And only pausing to fire and load.
444 is offline  
Old April 16, 2013, 11:18 AM   #3
m&p45acp10+1
Senior Member
 
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,307
The loader will work just fine for you. It fully resizes the case. It takes considerable force with the mallet to do so. It will be very loud.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.
m&p45acp10+1 is offline  
Old April 16, 2013, 11:53 AM   #4
lee n. field
Senior Member
 
Join Date: October 12, 2002
Location: The same state as Mordor.
Posts: 3,238
The Lee Loader for straight wall cases does full length size.

Quote:
I want to start small and am very interested in a Classic Lee Loader.
Five thousand cases -- my suggestion is to start a little bit up from the bottom. Lee Hand Press, with die set.

Actually, Lee makes a kit with pretty much everything you need. http://www.midwayusa.com/product/650...hand-press-kit. That plus a die set, will work much better, and you will be able to use what you bought once you move up to better hardware.
__________________
"As was the man of dust, so also are those who are of the dust, and as is the man of heaven, so also are those who are of heaven. Just as we have borne the image of the man of dust, we shall also bear the image of the man of heaven. "
lee n. field is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:52 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06812 seconds with 9 queries