The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old April 12, 2013, 05:11 PM   #1
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,207
wiping down your guns ?

do you guys use a silicone cloth or what do you use to wipe your guns after handling them ?
rebs is offline  
Old April 12, 2013, 05:29 PM   #2
Microgunner
Senior Member
 
Join Date: March 6, 2006
Location: Central Florida
Posts: 2,918
I buy cloth baby diapers (a single package will last for years) and Corrosion-X.
Has worked for years.
__________________
Proud NRA Patron Member
Microgunner is offline  
Old April 12, 2013, 06:50 PM   #3
Kreyzhorse
Senior Member
 
Join Date: April 12, 2006
Location: NKY
Posts: 11,478
A silicone cloth works great but I generally use a rag that been lightly oiled.
__________________
"He who laughs last, laughs dead." Homer Simpson
Kreyzhorse is offline  
Old April 12, 2013, 06:57 PM   #4
kilimanjaro
Senior Member
 
Join Date: November 23, 2009
Posts: 1,799
Silicone cloth, but anything to remove finger and hand oils from the bluing before putting it aside.
kilimanjaro is offline  
Old April 12, 2013, 07:02 PM   #5
BumbleBug
Senior Member
 
Join Date: March 11, 2013
Location: Near Heart of Texas
Posts: 450
Use a cotton bore patch sprayed with silicon. Rub down all outside metal, including the scope. A patch of light silicon down a clean barrel before storage is always a good thing!

...bug
BumbleBug is offline  
Old April 12, 2013, 07:15 PM   #6
cvc944
Senior Member
 
Join Date: March 17, 2013
Location: Lenhartsville, PA
Posts: 164
I keep all my gun metal dressed with Birchwood Casey's Barricade. I just think it is a really great product.
cvc944 is offline  
Old April 12, 2013, 07:29 PM   #7
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,692
An old t shirt and 3N1.
Hawg is offline  
Old April 12, 2013, 07:39 PM   #8
jaguarxk120
Senior Member
 
Join Date: February 28, 2008
Location: Michigan
Posts: 1,931
A sheepskin with RIG worked into the wool. It will leave a very thin film of RIG on the metal surface.
jaguarxk120 is offline  
Old April 12, 2013, 08:34 PM   #9
WallaceB
Member
 
Join Date: June 24, 2011
Posts: 25
shop cloth with Ezox
WallaceB is offline  
Old April 12, 2013, 09:19 PM   #10
TXAZ
Senior Member
 
Join Date: September 5, 2010
Location: TEXAS!
Posts: 1,349
Clean shop cloth & TW
__________________
!أنا لست إرهابي
TXAZ is offline  
Old April 12, 2013, 10:48 PM   #11
ClydeFrog
Junior member
 
Join Date: May 1, 2010
Posts: 5,798
CLP...

I use an old clean t-shirt or rag(fiber cloth) & a small amount of a synthetic CLP like LPX, Weaponshield, Gunzilla, etc.

You do not need large amounts of gun care or cleaning products for regular cleaning/oils.

A small drop or dab will do it.
Law enforcement agency armorers & professional gunsmiths say excessive oils/CLPs are some of the most common problems they see with firearms.
ClydeFrog is offline  
Old April 13, 2013, 08:45 PM   #12
johnwilliamson062
Senior Member
 
Join Date: May 16, 2008
Posts: 6,784
RIG on sheepskin is preferred. Must be a Midwest thing.
I carry a silicone cloth in my trunk and with my hunting equipment. I try to wipe a gun down with it before I put in the case. Sometime it doesn't go back in the safe the moment I get home.
__________________
$0 of an NRA membership goes to legislative action or court battles. Not a dime. Only money contributed to the NRA-ILA or NRA-PVF. You could just donate to the Second Amendment Foundation
First Shotgun Thread First Rifle Thread First Pistol Thread
johnwilliamson062 is offline  
Old April 14, 2013, 03:50 AM   #13
SteelChickenShooter
Senior Member
 
Join Date: May 12, 2011
Posts: 859
I keep a clean, worn out, thin, wash cloth in the shop and apply a few dozen drops of gun oil every so often. I wad it up in the vise for compression to spread the oil, then I keep it in a clean spot in one of the drawers. After handling, the blued rifle barrels and hand guns get wiped down.
SteelChickenShooter is offline  
Old April 14, 2013, 05:33 AM   #14
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,207
I have been using a winchester gun cloth with silicone kept in a zip lock baggy. From the replies I take that this is ok ?
rebs is offline  
Old April 14, 2013, 07:32 AM   #15
Nathan
Senior Member
 
Join Date: July 1, 2001
Posts: 1,906
Sheepskin with Weaponshield in it. When it gets too dirty, clean with brake clean and refill with Weaponshield.

Works better than other stuff I've used and leaves the gun dry enough.
Nathan is offline  
Old April 14, 2013, 09:16 AM   #16
Constantine
Senior Member
 
Join Date: December 5, 2010
Location: Miami, Florida
Posts: 5,176
I have a silicone cloth. I got it for when I used to carry SIG's more frequently.

I recommend them.
__________________
Sáncte Míchael Archángele, defénde nos in proélio, cóntra nequítiam et insídias diáboli ésto præsídium. Ímperet ílli Déus, súpplices deprecámur: tuque, prínceps milítiæ cæléstis, Sátanam aliósque spíritus malígnos, qui ad perditiónem animárum pervagántur in múndo, divína virtúte, in inférnum detrúde. Ámen
Constantine is offline  
Old April 14, 2013, 12:21 PM   #17
603Country
Senior Member
 
Join Date: January 6, 2011
Location: Thornton, Texas
Posts: 2,248
I have several 'oily wiping rags' here and there. A couple of them are small chunks of cotton towel (4 inch by about 6 inch) that I've oiled up. The others are the silicone cloth wiping towels that appeared to run out of silicone after some years, so I just put oil on them (3 in 1 oil) and kept on using them. I think I like the oiled up towel best, but just about any cotton cloth will do just fine.
603Country is offline  
Old April 14, 2013, 05:05 PM   #18
Beginner 1960
Member
 
Join Date: March 11, 2012
Location: East TN
Posts: 46
Was wondering if u use anything differnt to wipe down blued,nickel or stainless finishes
Beginner 1960 is offline  
Old April 14, 2013, 05:08 PM   #19
Garycw
Senior Member
 
Join Date: May 27, 2011
Location: Ohio-Kentucky - florida
Posts: 1,169
wiping down your guns ?

I wipe ALL of mine down with eezox
Garycw is offline  
Old April 14, 2013, 05:42 PM   #20
Shane Tuttle
Staff
 
Join Date: November 28, 2005
Location: Blue Grass, IA
Posts: 8,550
Eezox here with a soft cotton cloth.

I don't like to use cleaning stuff with silicone in it. The only exception is the polishing agent I use for tumbling my brass.
__________________
If it were up to me, the word "got" would be deleted from the English language.

Posting and YOU: http://www.albinoblacksheep.com/flash/posting
Shane Tuttle is offline  
Old April 14, 2013, 05:58 PM   #21
Slamfire
Senior Member
 
Join Date: May 27, 2007
Posts: 4,041
Oily patch. I keep that off the wood but on the metal.
__________________
If I'm not shooting, I'm reloading.
Slamfire is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.11401 seconds with 9 queries