The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 7, 2013, 09:31 AM   #1
Deadboyreloads
Junior Member
 
Join Date: March 31, 2013
Posts: 4
c.o.l.

I am loading 270 win with Speer 130 gr sp using Imr 4064. All data i find was tested with a c.o.l. of 3.24 but my Tikka will only hold 3.14 without it touching the lands. the starting load is 43 and max is 47. What adjustments should i make for the .1"?
Deadboyreloads is offline  
Old April 7, 2013, 10:17 AM   #2
dmazur
Senior Member
 
Join Date: July 5, 2007
Location: Pacific NW
Posts: 1,310
The way I understand this is that published COL's are for the test barrels the mfgr used when developing the data.

For bottleneck cartridges, the change in volume for a 0.100" difference in seating depth isn't as significant as when working with pistol cartridges. IMO, you should worry more about not jamming the bullet into the lands than about the slight increase in pressure the increased seating depth will cause.

I would seat for 0.010" off the lands and proceed with working up a load from minimum.
__________________
.30-06 Springfield: 100 yrs + and still going strong
dmazur is offline  
Old April 7, 2013, 10:54 AM   #3
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,314
Deadboyreloads,

Welcome to the forum.

As you have discovered all bullets do not have the same ogive shape. If you look at Hodgdon's online for the .270, they have a 130 grain Barnes seated at 3.23" and a 130 grain Hornady seated at 3.18".

That said, since Speer's own data for their particular bullet uses 3.24", I am concerned that your chamber is not made to standard specifications. I've read of at least one rifle with such an error, a roughing reamer rather than a finish reamer apparently having been used to complete setting headspace, thus leaving no proper throat. I would have the rifle checked by a gunsmith or a make a chamber casting. Something is amiss here.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is online now  
Old April 7, 2013, 11:10 AM   #4
PA-Joe
Senior Member
 
Join Date: June 9, 2010
Location: NEPA
Posts: 732
Use your 3.14 and start with 43 grains of 4064. Then work up to where you get the smallest groups.
PA-Joe is offline  
Reply

Tags
270 win. , c.o.l. , headspace , powder charge , reload

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06073 seconds with 9 queries