The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools
Old March 31, 2013, 02:16 PM   #1
k511
Senior Member
 
Join Date: December 1, 2010
Location: Oregon
Posts: 461
9mm AR style rifles that accept glock mags..

ive been kind of interested in these for a little while now...does anyone have one? how do you like it? thoughts? already have a .223AR and a .308AR.
k511 is offline  
Old March 31, 2013, 02:21 PM   #2
tahunua001
Senior Member
 
Join Date: July 21, 2011
Location: Idaho
Posts: 6,418
I don't own one but I have read a number of very spotty reviews, require a lot of fine tuning and often suffer long term issues. the ones that take colt mags like rock river arms and colt are a lot better and you're only sacrificing a single round from max capacity from 33 rounds to 32 over the glock styles.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar.
I never said half the crap people said I did-Albert Einstein
You can't believe everything you read on the internet-Benjamin Franklin
Bean counters told me I couldn't fire a man for being in a wheelchair, did it anyway. Ramps are expensive.-Cave Johnson.
tahunua001 is online now  
Old March 31, 2013, 02:59 PM   #3
tgreening
Senior Member
 
Join Date: February 7, 2011
Location: NE Ohio
Posts: 246
I want an AR in 9mm, and was all set to buy one when The Madness hit. Needless to say that plan went out the window for the time being, but when it settles down I will pick one up.

My intent is to just pick up a factory built Colt model. I would assume that coming from the factory I shouldn't have any "tuning" issues, and I'm fine with Colt vs "fill in your favorite". I like the idea of a carbine that accepts ammo I already have stock of, is the same as most of my pistols, and in saner times is plentiful and cheap.

I know I know. There will be a bunch that say 9mm is a waste in a rifle, but at the ranges I would intend to use it it would certainly get the job done. In that SHTF scenario so many seem to worry about, but can't really adequately define, I don't intend to fight. I intend to run whenever possible and fight only as a last desperate resort.

That stand your ground mentality is fine and dandy if you're young, single, and full of hormones. When you've got family to worry about, fightin is the last thing I want to do.
tgreening is offline  
Old April 5, 2013, 03:37 AM   #4
eodinert
Member
 
Join Date: February 26, 2013
Posts: 44
I have a 9mm AR that uses unmodified Uzi mags. This works well for me, as Uzi mags are (were) cheap, and I have a Uzi.

It's a load of fun, especially if you live somewhere you can get a suppressor and do an SBR. Do a lot of reading, there are several 'formats' (colt style vs. Oly style, etc, Uzi mags vs Colt mags vs modified Uzi mags vs Sten mags) for 9mm conversions, and you need to know what you want before you shop.
eodinert is offline  
Old April 5, 2013, 09:03 AM   #5
Skitter
Senior Member
 
Join Date: March 5, 2013
Location: NW Houston TX
Posts: 156
I have seen very good reviews on both the Kel-Tech and Hi-Point models of the 9mm/.40 carbines.

I want to get a Hi-Point in .40 just for the fun of it
__________________
Raised with guns only to realize how much I DIDN'T know. Newly acquired personal inventory is increasing, feed my obsession for knowledge!
Skitter is offline  
Old April 5, 2013, 10:39 AM   #6
Ridge_Runner_5
Senior Member
 
Join Date: February 8, 2008
Location: Denver, CO
Posts: 1,900
Olympic Arms makes a proprietary lower receiver that uses Glock mags.
Ridge_Runner_5 is offline  
Old April 5, 2013, 02:03 PM   #7
Nine the Ranger
Senior Member
 
Join Date: June 22, 2012
Location: Florida
Posts: 215
Just Right Carbines are chambered in 9mm, .40, and .45, and they all take Glock mags, as does the Kel-Tec Sub2000.

Well, the .45 versions might use 1911 magazines, not sure.

But I have heard some iffy issues about the JR Carbines, but 90% of it is AR compatible.
__________________
'A Vote is like a Rifle; It's usefulness depends upon the character of the User.'-Theodore Roosevelt

'In a Man to Man fight, the Winner is He who has one more round in his magazine.'-Erwin Rommel
Nine the Ranger is offline  
Old April 5, 2013, 02:10 PM   #8
blfuller
Senior Member
 
Join Date: January 8, 2013
Location: Washington State
Posts: 234
I believe Lone Wolf Distributing and Double Diamond Law Enforcement supply both make Glock magazine compatible AR15 lower receivers.
blfuller is offline  
Old April 6, 2013, 08:55 PM   #9
Ridge_Runner_5
Senior Member
 
Join Date: February 8, 2008
Location: Denver, CO
Posts: 1,900
Quote:
But I have heard some iffy issues about the JR Carbines, but 90% of it is AR compatible.
I don't see how that is possible with one off receiver, bolt carrier system and handguards.

Unless you mean the ability to change the stock, pistol grip trigger and flash hider.
Ridge_Runner_5 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:59 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08217 seconds with 9 queries