|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
April 1, 2013, 12:39 PM | #1 |
Senior Member
Join Date: May 13, 2011
Location: Carolina
Posts: 3,415
|
Manticore Arms AR NightBrake Review
I've been running the Manticore Arms NightBrake for a while and here's what I've found: Pros: -Very good muzzle control during rapid fire strings. -Reduces perceived recoil -Reduces muzzle climb -No ports face directly upward to prevent the muzzle flash from getting in your sight picture when firing in low light. -No ports on bottom 90 degrees to prevent dust from coming up in your face when firing from the prone. -Machined 8620 bar stock with a "deep black oxide" finish. -Crush washer included (it just annoys me when they're not...) -Can be used on ARs (and other 1/2x28 threaded rifles) firing up to 30 caliber (.311'' clearance) -Cost. Can be picked up for around $50 Cons: -Slightly increases muzzle flash. Not as bad as some but more than the A2 or Battlecomp for example... -Slightly more blast than an A2 flash hider. Nowhere near as bad as a side port style brake however. All in all, it's a very effective brake; especially for what they cost. Here's a video with some day and night shooting, a discussion of specs and my overall thoughts on the brake: Manticore Arms NightBrake HD Video Review Link
__________________
Mrgunsngear Youtube Channel |
Thread Tools | Search this Thread |
|
|