The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools
Old March 23, 2013, 01:34 PM   #26
kathys
Junior Member
 
Join Date: July 19, 2012
Posts: 9
Don't feel bad. I used to have trouble racking the slide and locking it back too until I learned that it's really a matter of technique and not strength. Watch this video, it's very helpful. http://www.youtube.com/watch?v=kbayNc6D9HY. I'm a middle aged woman and if I can do it you can too!
kathys is offline  
Old March 25, 2013, 01:03 AM   #27
Habaz72
Member
 
Join Date: September 9, 2011
Location: Georgia
Posts: 65
Empty mag would work except to me that is very much against how I was trained to clear a weapon. It sounds like you're a righty so try this. Instead of gripping the slide with thumb and first finger from the rear of the slide and the rest of your hand not doing anything.. Hold the gun in your strong hand and bring the gun across your body and grip the slide with all of your weak hand (keep your palm out of the ejection port, it could give you a not very playful pinch). Use both arms pushing in opposite directions to work the slide and hit the slide catch lever with your strong hand thumb.

Edited to add: Just like the video in the post right above mine.

Last edited by Habaz72; March 25, 2013 at 01:30 AM.
Habaz72 is offline  
Old April 20, 2013, 07:12 PM   #28
justplainpossum
Senior Member
 
Join Date: February 24, 2013
Location: duh, Texas! : )
Posts: 221
I did it I did it!!! And the first try, it was easy!!

You know what I was doing wrong? I wasn't holding down the safety grip; once I did that, the slide locked right into place, and I was able to fieldstrip it. Woohoo!

Thanks for all the great advice, guys!
justplainpossum is offline  
Old April 20, 2013, 07:20 PM   #29
bamiller
Senior Member
 
Join Date: January 3, 2010
Location: NW Ohio
Posts: 455
My XDM is extremely easy to strip. Now a 3" 1911 is another story...until after you've done it a few times.
bamiller is offline  
Old April 20, 2013, 08:45 PM   #30
justplainpossum
Senior Member
 
Join Date: February 24, 2013
Location: duh, Texas! : )
Posts: 221
Also, I had a jam today, my first one with the Springfield. I remembered what I learned here. I took a slow breath, stayed calm, removed the magazine, and worked the slide until the round came out.
justplainpossum is offline  
Old April 20, 2013, 08:53 PM   #31
Spats McGee
Staff
 
Join Date: July 28, 2010
Location: Arkansas
Posts: 5,168
Not that I was able to help out here, justplainpossum, but I'm glad to hear that you got it worked out.
__________________
A gunfight is not the time to learn new skills.

If you ever have a real need for more than a couple of magazines, your problem is not a shortage of magazines. It's a shortage of people on your side of the argument. -- Art Eatman
Spats McGee is offline  
Old April 21, 2013, 01:42 PM   #32
bikerbill
Senior Member
 
Join Date: September 19, 2007
Location: Lago Vista TX
Posts: 2,367
I'd take another look at the instructions, or find a YouTube video demonstration ... I have an XDm-9 and an XDs and both are the easiest guns I own to take down and reassemble for cleaning ... now if you want a gun that's hard, get one of the Kimber Ultra series or a Ruger 22lr ... those puppies will have you tearing out your hair .... well, if I had any hair ...
__________________
"If all guns were built with mechanisms that kept them from firing when held sideways, we could end gang violence." humorist Frank Fleming
bikerbill is offline  
Old April 22, 2013, 12:53 AM   #33
justplainpossum
Senior Member
 
Join Date: February 24, 2013
Location: duh, Texas! : )
Posts: 221
Bikerbill, I have a feeling it's easier for guys, but I think I've got it down now. Actually, I had a bigger problem with the bolt and spring -- it got away from me and nearly took out the flat screen!!
justplainpossum is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07959 seconds with 9 queries