The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools
Old March 18, 2013, 11:46 PM   #1
whiplash
Senior Member
 
Join Date: January 18, 2007
Location: Idaho
Posts: 331
S&W double trigger reset???

One of our jailers qualified with her S&W SW9 ("F" I think). She was having problems with pulling the trigger and no bang. I noticed her doing a good job at releasing her finger out only enough to reset the trigger. However, every few rounds it wouldn't fire. I tried it to reset and it has the feeling of going into neutral. It would go to reset, then all they way back with no resistance. After a couple more try's, I noticed a second reset. The trigger would go to the first reset physical and audible click, but then continue forward for a second reset. After getting to this second reset, and then to the rear to fire, everything fired just fine. So we worked on getting to this second reset, and had no more "no fires". This gun, if my memory is correct, resembles the old Sigma series (90's?). The trigger also looks like the M&P triggers. The million dollar question is.....is this second trigger reset normal for that model? Or is this trigger malfunctioning? I haven't shot every handgun, but I've shot a lot and never seen this second reset before. Any thoughts?

Didn't get time today to contact S&W.

Last edited by whiplash; March 18, 2013 at 11:58 PM.
whiplash is offline  
Old March 20, 2013, 05:19 PM   #2
whiplash
Senior Member
 
Join Date: January 18, 2007
Location: Idaho
Posts: 331
Bump
whiplash is offline  
Old March 20, 2013, 05:38 PM   #3
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 5,501
The SW9F is one of the 1st-generation Sigma pistols. These pistols were replaced by 2nd-gen "Enhanced" Sigma Series after only ~3 years of production, reportedly due to a number of deficiencies in the 1st-gen guns. The most frequently mentioned issues were chronic extraction and ejection problems, which were addressed with a redesigned extractor and ejector and an enlarged ejection port.

I do not know enough about Sigma evolution to know if S&W redesigned the trigger and/or whether this behavior is normal for a 1st-gen model. I can tell you, however, that the later Sigma trigger reset is long and has an odd feel- as with the M&P, although the two mechanisms reportedly share nothing in common other than the hinged design. A trip to a gun shop and a quick test of a newer Sigma trigger may help you to judge.

The SD9 VE and SD40 VE are the current 3rd-generation Sigma models.

FWIW S&W is well aware that the 1st-gen pistols have inherent problems, and has reportedly issued vouchers for free or discounted equivalent new-production Sigma pistols when a problematic 1st-gen pistol defies easy repair.
__________________
"Smokey, this is not 'Nam. This is bowling. There are rules... MARK IT ZERO!!" - Walter Sobchak

Last edited by carguychris; March 20, 2013 at 05:40 PM. Reason: minor reword...
carguychris is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05722 seconds with 9 queries