The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old March 13, 2013, 11:45 PM   #1
1AZguy
Junior Member
 
Join Date: March 12, 2013
Posts: 3
m96 questions

This is my first post, I didnt see an intro section or anything so figured id just start posting. I have a m96 Swedish Mauser in 6.5x55 that i got a while ago for almost nothing in a trade. I sprayed the stock added a simple scope and a few other things and love it. Ive been shooting just factory ammo usually 140gr but some 132 and 130 depending on what i find. Im getting into reloading and have been reading that most of the m96 rifles were made to use the military loads which were like 170gr. I know Hornady has a 160gr bullet, but im worried about what pressures are safe in my rifle. Im not trying to push the envelope or anything with loads, i just want good solid loads for deer or elk.





1AZguy is offline  
Old March 14, 2013, 01:14 AM   #2
Rainbow Demon
Senior Member
 
Join Date: September 27, 2012
Posts: 397
Never heard of a 170 gr 6.5 Milspec bullet
Quote:
Early ammunition was loaded with a 10.1 gram (156 grain) long round-nosed bullet (B-projectile) with a muzzle velocity of 700 m/s (2300 ft/s), while later rounds (from 1941 onwards) used a 9.1 gram (140 grain) spitzer bullet (D-projectile) with a muzzle velocity of 800 m/s (2625 ft/s).
160 gr is close enough to 156 that loads producing 2300 fps should be okay for the 96 if headspace is good and bore condition good.
You should check the length of the 160gr bullet first. If it intrudes into powder space when loaded to the standard COAL pressures may be elevated.
Rainbow Demon is offline  
Old March 14, 2013, 10:46 AM   #3
tahunua001
Senior Member
 
Join Date: July 21, 2011
Location: Idaho
Posts: 5,267
I agree with rainbow, 170 is incredibly heavy for 6.5, the bullet would be dang near 2 inches long. most that I see are in the 140-150 range. consider that one of the most popular cartridges out there for deer hunting is the 243 winchester and that the heaviest projectile out there is a 107 grain, 140 is sounding pretty good. also consider that in 6.5 swede most reloading manuals that I have seen have that 140 grain bullet traveling at almost the same speed as the 107 grain 243...

it doesn't matter.... just about anything you load up will kill a deer as long as it's a soft point, polymer tip or just about anything bu steel core, tracer or FMJ.

for elk, 6.5 swede is a bit on the small side and is considered marginal, if not underpowered, either way you need some serious, honest to goodness skills to be able to take an elk with a 6.5 swede, sometimes shooting MOA from sandbags at paper doesn't cut it...
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar.
I never said half the crap people said I did-Albert Einstein
You can't believe everything you read on the internet-Benjamin Franklin
Bean counters told me I couldn't fire a man for being in a wheelchair, did it anyway. Ramps are expensive.-Cave Johnson.

Last edited by tahunua001; March 14, 2013 at 01:21 PM.
tahunua001 is offline  
Old March 14, 2013, 10:39 PM   #4
1AZguy
Junior Member
 
Join Date: March 12, 2013
Posts: 3
ok thanks guys. I think i will give the 160gr hornady bullets a try if i can find them. I took the rifle to a local smith when i first got it and had it checked over and they said everything was good. Im not sure if there is anything more i could check myself to be sure

Last edited by 1AZguy; March 14, 2013 at 11:02 PM.
1AZguy is offline  
Old March 15, 2013, 07:29 PM   #5
jersurf101
Senior Member
 
Join Date: January 27, 2013
Posts: 220
140 grn berger hunting bullets work very well for me over IMR 4064.
jersurf101 is offline  
Old March 15, 2013, 09:35 PM   #6
1AZguy
Junior Member
 
Join Date: March 12, 2013
Posts: 3
i cant find any 4064, i ordered some h414 so ill try that and see how that goes. Its definitely not a good time to be getting into reloading with everything so hard to find and so expensive when you do find it.
1AZguy is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06417 seconds with 9 queries