The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools
Old March 2, 2013, 06:58 PM   #1
KROIL
Senior Member
 
Join Date: August 25, 2006
Posts: 270
Glocks and KCI Magazines

So what is the scoop on the Korean KCI Glock Mags ? They are a bit cheaper than the factory mags. Any one use em - how do they work for you ?
KROIL is offline  
Old March 2, 2013, 08:13 PM   #2
Retread7
Member
 
Join Date: October 7, 2010
Posts: 16
They are good... if you replace the springs (use Wolf Gun Springs or Glock) and take a few minutes to trim the plastic shards around the mag throat. The KCI springs are pretty bad, these rest of the mag is good.
Retread7 is offline  
Old March 2, 2013, 08:30 PM   #3
AK103K
Senior Member
 
Join Date: May 1, 2001
Location: PA -- In the shadow of the Shade
Posts: 7,780
I have a bunch of them now, and they have all worked fine. They dont load quite as smoothly as the factory mags, but the seem to empty just fine.

All I did with mine, was to take them out of the wrap, load them and shoot them.
__________________
“The enemy is anybody who's going to get you killed, no matter which side he is on.”
― Joseph Heller, Catch-22

Zeitgeist - The Movie
AK103K is offline  
Old March 3, 2013, 02:54 AM   #4
TennJed
Senior Member
 
Join Date: September 26, 2010
Posts: 1,518
I have a couple of of them and they do empty fine, but I can not load them to max. The 17 round mags will only load up 15 rds
__________________
Find out just how tall I am
By jumping in the middle of a river
TennJed is offline  
Old March 3, 2013, 03:00 AM   #5
shootniron
Senior Member
 
Join Date: April 16, 2011
Posts: 1,147
Spring change and they are good to go.
shootniron is offline  
Old March 3, 2013, 03:41 AM   #6
CAOxInfinity
Member
 
Join Date: November 30, 2011
Posts: 36
Re: Glocks and KCI Magazines

I have 6 of the 33rnd KCI mags for my G17. Few thousand rounds without a failure. I trust em.
CAOxInfinity is offline  
Old March 3, 2013, 09:08 AM   #7
lee n. field
Senior Member
 
Join Date: October 12, 2002
Location: The same state as Mordor.
Posts: 3,161
Quote:
They are good... if you replace the springs (use Wolf Gun Springs or Glock)
See attached. These are Glock 19 magazines. Not counting the 33 round stick, I have 6 kci magazines, and replaced 4 mag springs with Glock OEM.

(One I put a Wolff spring in. The Wolff spring for the 19 is an extra power spring, that doubles as a spring for the longer G17 magazine. Pretty stiff. I will probably eventually get an extended base to use with that spring.)

KCI springs are shorter, and made with thinner wire. Note the pic with the springs in the magazine and with baseplates off. The KCI spring barely peeks out the bottom of the magazine. Not much ooomph there, to help feed cartridges.

Oh, yeah. While I was doing this, one of the KCI magazine bases broke. Ooops. So, some more Glock OEM stuff I need to order out.
Attached Images
File Type: jpg glock vs kci 1sm.JPG (206.9 KB, 15 views)
File Type: jpg glock vs kci 2sm.JPG (198.1 KB, 14 views)
__________________
"As was the man of dust, so also are those who are of the dust, and as is the man of heaven, so also are those who are of heaven. Just as we have borne the image of the man of dust, we shall also bear the image of the man of heaven. "
lee n. field is offline  
Old March 3, 2013, 09:34 AM   #8
Nakanokalronin
Senior Member
 
Join Date: July 29, 2006
Posts: 881
I had 10 of the drop-free 15rd 9mm KCI mags when I owned a G19 that I bought for $6 each. I trimmed any excess plastic off inside the body and around the feed lips, but I never changed out the springs and they were 100% reliable. IMO, they're perfect range mags to keep your factory mags like new and if anything wears out, factory Glock internals work just fine.
Nakanokalronin is offline  
Old March 4, 2013, 12:37 PM   #9
tjhands
Senior Member
 
Join Date: January 20, 2005
Posts: 1,708
No way in hell I'd trust one for defensive use.
__________________
"If the sole purpose of handguns is to kill people, then mine are all defective." - Uncle Ted Nugent
tjhands is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08135 seconds with 10 queries