Load data for. 40 with small rifle primers

realitycheck · March 2, 2013, 03:57 PM

Hi all I'm new here I am need of load data for. 40 Cal 165 grain tcfmj, Unique Powder and small rifle primers?
If anyone can help is greatly appreciate it.

Sevens · March 2, 2013, 05:33 PM

Use the published load data you can already find for this load -- and using proper handloading techniques, reduce the MAXIMUM load by 10% and start there. If you wish to increase, do so while observing signs of pressure.

You will not likely find any load data for .40 S&W handloading that is specific for use with magnum or small rifle primers.

That's not to say you can't do it. You simply aren't likely to find specific data for it.

realitycheck · March 2, 2013, 07:32 PM

Thank you very much for your help

BigDinFL · March 2, 2013, 09:40 PM

Why not just place a back order and wait until you can get the proper components?

March 2, 2013, 03:57 PM	#1
realitycheck Junior Member Join Date: March 2, 2013 Posts: 7	Load data for. 40 with small rifle primers Hi all I'm new here I am need of load data for. 40 Cal 165 grain tcfmj, Unique Powder and small rifle primers? If anyone can help is greatly appreciate it.

March 2, 2013, 05:33 PM	#2
Sevens Senior Member Join Date: July 28, 2007 Location: Central Ohio Posts: 6,862	Use the published load data you can already find for this load -- and using proper handloading techniques, reduce the MAXIMUM load by 10% and start there. If you wish to increase, do so while observing signs of pressure. You will not likely find any load data for .40 S&W handloading that is specific for use with magnum or small rifle primers. That's not to say you can't do it. You simply aren't likely to find specific data for it. __________________ *Attention Brass rats and other reloaders:* I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.

March 2, 2013, 07:32 PM	#3
realitycheck Junior Member Join Date: March 2, 2013 Posts: 7	Re: Load data for. 40 with small rifle primers Thank you very much for your help

March 2, 2013, 09:40 PM	#4
BigDinFL Senior Member Join Date: December 20, 2012 Location: The "Gunshine State" Posts: 883	Why not just place a back order and wait until you can get the proper components?