The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 24, 2013, 11:59 AM   #26
Boomer58cal
Senior Member
 
Join Date: February 18, 2013
Location: closer than you think
Posts: 968
I can load near match grade for the price of the cheap factory stuff and save more by reloading the brass. The real cost is in man hours but for some of us that's half the fun.

Last edited by Boomer58cal; February 24, 2013 at 12:01 PM. Reason: stupid spell check keeps changing my words
Boomer58cal is offline  
Old February 24, 2013, 07:00 PM   #27
m&p45acp10+1
Senior Member
 
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,307
I get good cost savings on all but one caliber that I reload for. The one I spend more money is for the 7,62x54R. I can get bulk spam can ammo for less than half the cost that I spend to reload for it. Though I like reloading for those. It is for my wife, and the reduced recoil rounds allow her to shoot all day without the punishing recoil.


Three of the rounds I reload for have not had factory ammo loded for them in years. One of them literaly decades that I know of. (.35 WCF)

The major cost savings for me come from casting lead bullets. There is a huge cost savings when I do that.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.
m&p45acp10+1 is offline  
Old February 25, 2013, 05:24 AM   #28
TheNatureBoy
Senior Member
 
Join Date: September 6, 2007
Posts: 1,180
After the initial investment of $300-$500 dollars purchasing a reloading kit, manual, bullets, primers, cases, powder it becomes cost effective.
TheNatureBoy is offline  
Old February 25, 2013, 11:35 AM   #29
maillemaker
Senior Member
 
Join Date: August 30, 2010
Posts: 1,010
>After the initial investment of $300-$500 dollars purchasing a reloading kit, manual, bullets, primers, cases, powder it becomes cost effective.

Using wheel weight cast bullets, and range-scrounged brass, a box of 50 .45 ACP costs me about $4. If you can buy it right now, it's at least $20. I typically shoot 200 rounds of .45 ACP in a trip to the range - 4 boxes. Store-bought, that's $80. Homemade, it's $16. That's a savings of $64.

That means that in 5-8 trips to the range you have paid for your reloading equipment.

To me, it's the difference between shooting and not shooting. I can't justify to my wife that I'm going to go blow $80 today. $16, I can justify that.

Steve
maillemaker is offline  
Old February 25, 2013, 12:55 PM   #30
Old 454
Senior Member
 
Join Date: August 15, 2011
Location: Chesterton Ind.
Posts: 396
I noticed Renolds that you factored in the price of your brass with your reloads,(.72 cents) I hope you get more then one loading from your brass.
Old 454 is offline  
Old February 25, 2013, 02:05 PM   #31
Shootest
Senior Member
 
Join Date: February 9, 2011
Location: Just outside Cleveland, Ohio
Posts: 617
Recently I loaded a box of 50 premium 125g JHP in 357 mag at a total cost of $7.49. I looked online and found the closest thing I could at 44.99. Of course they were OUT OF STOCK. That is a savings of $37.50/box even if I could buy them. Thus reloading seems cost effective to me.
__________________
The private ownership of firearms is an American Heritage. Anyone who disputes that is Anti-American and unpatriotic.
NRA Life Member
http://s1096.photobucket.com/albums/g327/Wynn3/
Shootest is offline  
Old February 25, 2013, 02:10 PM   #32
reynolds357
Senior Member
 
Join Date: December 10, 2012
Posts: 2,239
Old 54, the .72 was without brass factored in.
I get anywhere between 4 and 30 loadings from my brass. The b.r. stuff can get up to 30, the screaming velocity stuff gets between 4 and 6.
reynolds357 is offline  
Old February 25, 2013, 02:32 PM   #33
9miller
Member
 
Join Date: January 11, 2012
Posts: 84
I mainly load 124gr. Hollow points for 9mm and it cost me 12 bucks for 100 rounds. I also load 55gr. Soft points and vmax rounds in .223 and pay a whopping 20 bucks per 100 rounds. And another thing, can you even find these rounds on the shelves right now? Hardly so in myrtle beach, but they sure as hell come off my bench pretty well
9miller is offline  
Old February 25, 2013, 03:27 PM   #34
Budweiser
Member
 
Join Date: August 1, 2009
Location: Minnesota
Posts: 20
Pennies on the dollar for my .41 Mag! Jaw drops and cough every time I eyeball the retail price.

When was the last time you saw a box of commercial 6MM on the shelf? Yeah I know, I am kind of an oddball too.

I bet I paid for my Dillion RL550 the first year from the savings on 7,000 rounds of 4 different calibers?

And as mentioned previously, the feeling of having thousands loaded, and many thousands in components on hand is priceless when walking by empty shelves at EVERY retail outlet?
Budweiser is offline  
Old February 25, 2013, 05:29 PM   #35
CADILLAC HOOSIER
Member
 
Join Date: August 28, 2010
Location: INDIANA
Posts: 62
I shoot about 1200-1500 rounds a month of 38SPL, 357 and 40S&W. There is no way that I could buy off the shelf ammo and afford it. PLUS---RELOADING IS A WHOLE OTHER ADDICTION. I have as much fun messin with reloading as I do shooting. Saving money on two hobbies!!
Load safe, shoot safe, HOOSIER
CADILLAC HOOSIER is offline  
Old February 25, 2013, 10:25 PM   #36
Lost Sheep
Senior Member
 
Join Date: January 24, 2009
Location: Anchorage Alaska
Posts: 2,986
For a more exhaustive treatment of the question

Take a look in these two threads.

http://thefiringline.com/forums/showthread.php?t=51502

http://thefiringline.com/forums/showthread.php?t=508887

http://www.thehighroad.org/showthread.php?t=663065

http://rugerforum.net/reloading/1671...-analysis.html

I developed a spreadsheet to evaluate where your breakeven point is. It includes amorizing the, cost of learning to load (classes), cost of initial equipment and, if you wish, the time you spend loading.

Shall we beat this one to death? No, it will neve die.

Lost Sheep
Lost Sheep is offline  
Old February 26, 2013, 08:46 AM   #37
GruntgunDr
Junior Member
 
Join Date: February 25, 2013
Location: SW AR
Posts: 4
I reload for many reasons. The satisfaction of finding out what I like to shoot I can have ammo I just a short time rather than trying to find some to buy. Also, it's a family tradition, growing up in a gun shop, and having a Dad & Uncle who reloaded. I always wanted to spend time with them and caught the bug. I was sizing cast bullets before I ever went to school. It's what we do!
__________________
Years of experience has taught me one thing, truth is stranger than fiction!
GruntgunDr is offline  
Old February 26, 2013, 04:43 PM   #38
centurion20000
Member
 
Join Date: December 11, 2012
Location: North Texas
Posts: 16
I reload 454 and 45 Colt for about 35 cents tops (good bullets (300/325/360/395gr), prime powders and primers)

45 Colt +P STARTS at $1.10 / round
454 loads 300gr and above START at 1.80/round.

My break even was achieved long ago. And my ammunition is better than what I can buy.

Extreme consistency begets extreme accuracy.


Still working on developing my 18 cent 30-06 load (go price that stuff too)

www.ammoseek.com
centurion20000 is offline  
Old February 26, 2013, 07:15 PM   #39
Misssissippi Dave
Senior Member
 
Join Date: December 5, 2009
Posts: 1,407
I enjoy reloading. I like having ammo available when I want to shoot. I also like being able to load to suit my needs or wants. Saving money is just a bonus. I only load handgun ammo now. I still save money over the cost of even the cheapest ammo I have seen on the shelf of any store in the past year when they had ammo. I don't care for the bills I tend to run up buying in bulk at the time of purchase. After everything arrives I tend to forget about the cost. It becomes time for enjoying reloading again. Even at times like these, I like being able to put a half case of ammo in my range bag. It doesn't matter if I shoot it all or not. At least it is available. If I only was buying ammo locally this wouldn't even be an option.

It isn't a matter of cost effectiveness for me.
Misssissippi Dave is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09994 seconds with 10 queries