The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 23, 2013, 10:53 AM   #1
02bigdogs17
Senior Member
 
Join Date: November 25, 2012
Location: Indiana
Posts: 117
45ACP with 230gr lead RN

I bought some hard cast lead bullets to load for my 1911 the other day. Full metal jackets are getting harder to find. I have never loaded lead bullets for my 1911 does anyone have any good load data for these. They are 230gr RN made by hunter supply. Is there anything I need to be aware of before I get started? I am planning on using Unique,or AA No.5 powder. Thanks for all the help.
02bigdogs17 is offline  
Old February 23, 2013, 11:23 AM   #2
schmellba99
Senior Member
 
Join Date: January 8, 2008
Posts: 606
I've loaded and shot many a thousand cast lead through my .45's with no trouble. Just make sure any excess lube is wiped off, follow normal loading procedures and use good load data.

Unfortunatley right now I'm at work and cannot give you my specific load data for my cast lead (Friendswood Bullet Company) loads. I've never used the AA, but have used plenty of Unique with good results.

Here is Alliant's load data for Unique:

http://www.alliantpowder.com/reloade...3&cartridge=35

They list a 5.8 grain charge - I want to say that my standard range/plinking/not breaking my wrist load for Unique is 5.6 or 5.4 grains. Interesting that Alliant's site does not give a range like most other sites do, so I cannot tell you if that is a median load, min or max load and what the charge weight spread acceptable limits are.
schmellba99 is offline  
Old February 23, 2013, 11:40 AM   #3
Shootest
Senior Member
 
Join Date: February 9, 2011
Location: Just outside Cleveland, Ohio
Posts: 652
Read the sticky at the top of the forum, it is informative and complete.
__________________
The private ownership of firearms is an American Heritage. Anyone who disputes that is Anti-American and unpatriotic.
NRA Life Member
Shootest is offline  
Old February 23, 2013, 12:39 PM   #4
Constrictor
Member
 
Join Date: February 19, 2013
Posts: 30
I've never shot anything but lead 230 bullets through my 45's
My favorite load is 230 g lead rn from missouri bullet over 5.7 g unique.
Constrictor is offline  
Old February 23, 2013, 03:58 PM   #5
RickAZ
Junior Member
 
Join Date: October 5, 2012
Posts: 13
Been loading 230 RN cast for my full size Colt 1911 (fitted with a light weight para ordinace frame kit) for more than 20 years. 6.1g Unique. Never had a problem and shoots very tight groups at 25 yds. Have even busted clay birds at 100 yds with these loads.

My light weight Officer's model won't feed the 230 RN lead. Loaded 185g SWC lead with 5.7g Unique. It eats these up with no problem.
RickAZ is offline  
Old February 23, 2013, 06:48 PM   #6
chris in va
Senior Member
 
Join Date: December 26, 2004
Location: Louisville KY
Posts: 12,638
LRN profiles (ogive) vary greatly between manufacturers. You'll want to make a couple dummy rounds (no powder or primer, seated bullet) to determine what OAL your gun likes. Make sure they pass the plunk test in the barrel.
chris in va is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07088 seconds with 9 queries