120 grain lead round nose

JMILLER · February 16, 2013, 06:12 PM

Does anyone have a load worked up
for this in 9 mm?

chris in va · February 16, 2013, 11:56 PM

Lyman 49th has a decent 120gr list.

JMILLER · February 17, 2013, 04:13 AM

Thanks for the info

FrankenMauser · February 17, 2013, 04:09 PM

Any lead 120-125 gr data will do.

My personal load is 4.6 gr Unique with CCI or Winchester SP primers. (I tested both, separately, and now use them interchangeably in that load.)

Set the OAL you like, and work up from 4.3 gr. Max will be around 4.9-5.3 gr, depending on the data source you choose. But, you may find a good load (like I did) long before you reach max.

February 16, 2013, 06:12 PM	#1
JMILLER Junior Member Join Date: February 16, 2013 Location: LAUREL,MS. Posts: 7	120 grain lead round nose Does anyone have a load worked up for this in 9 mm?

February 17, 2013, 04:09 PM	#4
FrankenMauser Senior Member Join Date: August 26, 2008 Location: 1B ID Posts: 5,398	Any lead 120-125 gr data will do. My personal load is 4.6 gr Unique with CCI or Winchester SP primers. (I tested both, separately, and now use them interchangeably in that load.) Set the OAL you like, and work up from 4.3 gr. Max will be around 4.9-5.3 gr, depending on the data source you choose. But, you may find a good load (like I did) long before you reach max. __________________ "Such is the strange way that man works -- first he virtually destroys a species and then does everything in his power to restore it."

February 16, 2013, 11:56 PM	#2
chris in va Senior Member Join Date: December 26, 2004 Location: Louisville KY Posts: 11,718	Lyman 49th has a decent 120gr list.

February 17, 2013, 04:13 AM	#3
JMILLER Junior Member Join Date: February 16, 2013 Location: LAUREL,MS. Posts: 7	Thanks for the info