The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old January 5, 2011, 01:37 PM   #1
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,948
List of Official On-Line Load Data Sources

These are the "official" sources of load data that are available on-line, that I have been able to find. If you know of more, please include them in your post. I will add them to this list so as to serve as a convenient, single-source reference.

Please send me a PM if you know of additional, authorized sources or if a link is incorrect/outdated.

Accurate Arms

Accurate's Lt-32 data

ADI Powder Guide

Alexander Arms 50 Beowulf Data

Alexander Arms 6.5 Grendel Data

Alliant Please note: Considerable data from Alliant can only be found by going to the "Products" link, selecting the powder in which you are interested and selecting the "View All XYZ Recipes". A great many loads do not show up in the Data Library directly.

2010 Alliant Reloader's Guide

2013 Alliant Reloader's Guide

2014 Alliant Reloader's Guide (pdf format)

2015 Alliant Reloader's Guide (pdf format)

Barnes

Hodgdon, IMR and Winchester

Hodgdon Basic Manual, 2008

IMR Handloading Guide, 2003

IMR Handgun Guide

IMR Trail Boss Reduced Rifle and HANDGUN, lead AND JACKETED Loads

Norma

Nosler (As of mid-2013 contains ALL Nosler data)

Ramshot

Rex

Sierra .300BLK Data

Speer

2015 Vihtavuori Reloading Guide (pdf)

Vihtavuori-Lapua

Western

CAUTION: The following sources include either all unofficial or at best mixed loading data from official, unconfirmed and unofficial sources. USE AT YOUR OWN RISK. Neither the writer, The Firing Line, nor the staff of TFL assume any liability for any damage or injury resulting from use of this information.

Handloads.com

LoadData.com

Reloader's Nest

Taffin Tests

Last edited by Mal H; October 13, 2015 at 11:15 AM. Reason: Update Alliant and Vihta guides
Brian Pfleuger is offline  
Old March 2, 2011, 12:33 PM   #2
That'll Do
Senior Member
 
Join Date: October 25, 2008
Location: Pittsburgh, PA
Posts: 547
Loaddata.com

It is a pay service, about $30 a year, but it has loads for just about any cartridge you can imagine, and it has all the load data that is in Handloader and Rifle Magazines. Additionally, it also contains data from all the load manuals listed at the top of the page.
That'll Do is offline  
Old February 12, 2013, 08:15 PM   #3
huntinaz
Senior Member
 
Join Date: September 21, 2010
Location: az
Posts: 1,094
Here's a link to a 2004 edition of Alliant's Reloader's Guide, there are laods in here that aren't on the current website. I found it on another forum looking for data for Herco powder.

Alliant 2004 Reloader's Guide

Also, some stuff from Alexander Arms on their calibers:
50 Beowulf Data

6.5 Grendel Data

What about stuff like Taffin Tests? I'm not sure it's been tested by component companies, just old Taffin I'll include it, if it's not official enough then I expect you'll edit it.

Taffin Tests:
__________________
"Once you quit hearing sir and ma'am, the rest is soon to follow." - Cormack McCarthy
"Feed me, or feed me to something. I just want to be part of the food chain." -Al Bundy
huntinaz is offline  
Old February 13, 2013, 11:01 AM   #4
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,948
Thanks huntinaz, I've added the Official sources to the list.

I'm going to add a second section at the bottom of the list for unofficial, or "less" official sources.
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old February 13, 2013, 01:03 PM   #5
Pongo
Member
 
Join Date: October 26, 2009
Posts: 74
Some might encounter ADI powder.

http://www.adi-powders.com.au/handloaders%2Dguide/
Pongo is offline  
Old February 13, 2013, 01:56 PM   #6
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,948
Got it, thanks!
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old February 15, 2013, 03:21 AM   #7
Marco Califo
Senior Member
 
Join Date: April 4, 2011
Location: LA
Posts: 1,109
This is a link to older official manufacture's flyers:
http://www.castpics.net/LoadData/Freebies/default.html

I find these useful for things like the Reloader 12, which I still have a canister of. They don't make it any more.
__________________
........................................................
Marco Califo is offline  
Old February 15, 2013, 09:19 AM   #8
Cheap 870
Junior member
 
Join Date: November 12, 2011
Location: Ohio
Posts: 159
http://www.6mmbr.citymaker.com/f/Sierra308Win.pdf
http://www.speer-bullets.com/product...l/default.aspx

Last edited by Cheap 870; February 15, 2013 at 09:26 AM.
Cheap 870 is offline  
Old February 15, 2013, 03:40 PM   #9
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 3,914
Handloads.com
__________________
Thanks for coming!
hooligan1 is offline  
Old February 15, 2013, 06:07 PM   #10
Marco Califo
Senior Member
 
Join Date: April 4, 2011
Location: LA
Posts: 1,109
Quote:
Alliant Please note: Considerable data from Alliant can only be found by going to the "Products" link, selecting the powder in which you are interested and selecting the "View All XYZ Recipes". A great many loads do not show up in the Data Library directly.
I just tried this for 40 and 9mm, for both shotgun and pistol powders, and did not find any additional loads.
__________________
........................................................
Marco Califo is offline  
Old February 15, 2013, 10:09 PM   #11
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,948
It depends on the powder and/or cartridge. For example, 357sig shows no Power Pistol loads but if you go to the Power Pistol page and look at loads, there is a listing for 357sig.
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old February 16, 2013, 07:42 AM   #12
ATPBULLETS
Senior Member
 
Join Date: July 31, 2012
Location: Land between the Lakes
Posts: 261
The accurate powder link you provided is an older version.... as the company now offers version 3.5 which includes some newly formulated info...

http://www.accuratepowder.com/load-data/


Thanks Brian for all the info... good resource...

Last edited by Brian Pfleuger; September 6, 2013 at 04:50 PM. Reason: Thanks, fixed it.
ATPBULLETS is offline  
Old September 6, 2013, 04:50 PM   #13
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,948
Links Updated
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old November 29, 2013, 06:54 PM   #14
pathdoc
Senior Member
 
Join Date: February 12, 2013
Posts: 526
Some might encounter ADI powder.

Let's play "Pick the fellow Australian". (Or possibly New Zealander?)

Check those IMR and Hodgdon powders - you'll be surprised how many of them are described on the bottle as "Made in Australia". ADI will tell you, if you e-mail them, how the relabelling scheme works. Valuable if you plan on taking a hunting trip and reloading while you're there!!
pathdoc is offline  
Old December 1, 2013, 03:33 PM   #15
hgmeyer
Senior Member
 
Join Date: February 26, 2013
Location: Elgin, IL
Posts: 133
Some useful shotgun data is under the various gauges at Claybusters (wads)

http://www.claybusterwads.com/
hgmeyer is offline  
Old January 2, 2014, 03:34 PM   #16
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,948
2013 Alliant Reloader's Guide added!
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old January 2, 2014, 08:58 PM   #17
DannyB1954
Senior Member
 
Join Date: December 10, 2013
Location: Pahrump Nv USA
Posts: 480
Maybe not "official", but useful responsible info.

http://www.handloads.com/loaddata/default.asp
http://best9mm.com/reloading9mm.html
http://www.reloadersnest.com/index.asp
http://www.realguns.com/ Rifle on the left, handguns lower right.

Last edited by DannyB1954; January 2, 2014 at 09:04 PM.
DannyB1954 is offline  
Old November 23, 2014, 11:52 AM   #18
Marco Califo
Senior Member
 
Join Date: April 4, 2011
Location: LA
Posts: 1,109
Alliant 2014 Guide

Alliant has their 2014 guide available for download. It is much easier to use than the on-line version. The 2014 guide includes some shotgun powder pistol loads, but not all.

http://www.alliantpowder.com/resourc...er_Catalog.pdf
__________________
........................................................
Marco Califo is offline  
Old February 1, 2015, 04:15 AM   #19
Marco Califo
Senior Member
 
Join Date: April 4, 2011
Location: LA
Posts: 1,109
Alliant 2015

http://www.alliantpowder.com/resourc...ant_Powder.pdf
__________________
........................................................
Marco Califo is offline  
Old September 11, 2015, 08:10 PM   #20
Marco Califo
Senior Member
 
Join Date: April 4, 2011
Location: LA
Posts: 1,109
Vihtavuori 2015 Reloading Guide download

http://img.materialbank.net/NiboWEB/...&type=original
__________________
........................................................
Marco Califo is offline  
Old October 13, 2015, 11:16 AM   #21
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 14,982
Links updated
Mal H is offline  
Old January 23, 2016, 06:24 PM   #22
Marco Califo
Senior Member
 
Join Date: April 4, 2011
Location: LA
Posts: 1,109
New Accurate Load Guide published.

http://www.accuratepowder.com/wp-con...1-2016_Web.pdf
__________________
........................................................
Marco Califo is offline  
Old February 21, 2016, 12:23 AM   #23
Marco Califo
Senior Member
 
Join Date: April 4, 2011
Location: LA
Posts: 1,109
New Alliant 2016

http://www.alliantpowder.com/resourc...ant_Powder.pdf
__________________
........................................................
Marco Califo is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.23708 seconds with 9 queries