The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 9, 2013, 06:18 PM   #1
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,195
reloading for a 300 savage ?

if there is such a thing, what is a standard gr bullet to reload for the 300 savage ? Not so much a hunting load as a plinking and target type fun to shoot load.
rebs is offline  
Old February 9, 2013, 08:38 PM   #2
fishbones182
Member
 
Join Date: August 1, 2012
Location: Florida
Posts: 98
Well the 300 savage is a standard .308 dia. The bullets used in it commonly are anywhere from 100 to 200 grains. I use a 150 grain bullet with imr4895 at 36.6 grains for my gun. I would suggest you work from the starting charge and work up. I use the 150 grain .308 bullet for many rifles so it makes buying in bulk easier.
fishbones182 is offline  
Old February 9, 2013, 09:04 PM   #3
dacaur
Senior Member
 
Join Date: March 16, 2010
Posts: 733
Its basically just a slightly less powerful .308 Winchester (yes, I realize the .308 win. was developed from the .300 savage) so bullets that work in the .308 winchester, will also work in the .300 savage. I reload for my uncle's 300 savage, and use 150gr bullets....
dacaur is offline  
Old February 9, 2013, 09:32 PM   #4
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 35,700
200 grain bullets are problematic in the 300 savage. The long bullet intrudes into the powder space which keeps velocities low. this is made some what worse by the very short neck on the 300.

where the cartridge really sings however is with 150 to 165 grain bullets.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old February 9, 2013, 11:12 PM   #5
fishbones182
Member
 
Join Date: August 1, 2012
Location: Florida
Posts: 98
I use the same 150 grain bullet in my 300 savage, 30-06, 300 win mag, and my 30-30 which is a bolt action so the soft point bullets work great in. Sure makes buying in bulk alot easier.
fishbones182 is offline  
Old February 11, 2013, 05:06 PM   #6
Ronbert
Senior Member
 
Join Date: September 23, 2009
Location: Ft. Collins, CO.
Posts: 398
I'm starting down this road myself with my grandfather's Model 99.

The reloading manuals suggest using flat based bullets rather than boat tails as the short neck gives minimal surface to retain the bullet.

150 seems to be the typical bullet in factory ammo my grandfather used. (I have 4 factory boxes of empty cases that he kept as he used them up.)
Ronbert is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06710 seconds with 9 queries