The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 7, 2013, 07:37 PM   #1
FloridaGuy
Senior Member
 
Join Date: December 8, 2012
Location: Clearwater, FL
Posts: 175
Powder Choice for loading .45 Colt

I want to load some .45 Colt this weekend using a 200 gr Cast RNFP bullet and a Hornady 230 gr FMJ-RN Encapsulated. What powder does everyone recommend? The only powder I currently have is Clays. I will be loading them on a Dillon SDB press.

Last edited by FloridaGuy; February 7, 2013 at 07:49 PM.
FloridaGuy is offline  
Old February 7, 2013, 08:34 PM   #2
Pathfinder45
Senior Member
 
Join Date: January 7, 2008
Posts: 919
In these days of shortages.....

If you can't be with the powder you love; love the powder you're with. I've used a lot of powders in 45 Colt. There are a lot of good ones, several great ones, and others not so good. I've never used Clays but according to some here, it's a good one. Nowadays with the current run on components it's good to know what will work well as a substitute for your favorite powder when it's out of stock. My favorite powder for a certain performance level is Hodgdon HS-7; a powder that has been discontinued. My other favorites are Titegroup; Unique; and AA-9. Those four powder cover the spectrum of performance levels I want out of the 45 Colt. Here's a partial list of other powders that have worked well for me: Red Dot; W-231/HP-38; Green Dot; AA-5; IMR-4227. An interesting powder that every owner of a 45 Colt should try at least once in their life is the original black-powder. I used as much fffG black-powder as I could pack under a 255 grain cast lead bullet and it was impressive. It's not a light target load by any means. It's the load that built the 45 Colt's reputation as a powerful weapon.
Pathfinder45 is offline  
Old February 7, 2013, 08:51 PM   #3
black mamba
Senior Member
 
Join Date: September 13, 2011
Location: O'Fallon, MO
Posts: 554
For general shooting it is hard to beat W231/HP-38. It meters beautifully, shoots accurately and is clean burning. However, if you can find load data for the Clays you have, it should work just fine.
black mamba is offline  
Old February 7, 2013, 08:54 PM   #4
shootniron
Senior Member
 
Join Date: April 16, 2011
Posts: 1,147
Unique works well...but I mostly us 231.
shootniron is offline  
Old February 7, 2013, 10:04 PM   #5
AL45
Senior Member
 
Join Date: December 12, 2012
Posts: 307
For 250 grain and under I have had good results with Unique, Trail Boss and Universal. All were a little dirty though.
AL45 is offline  
Old February 7, 2013, 10:08 PM   #6
BigTex308
Senior Member
 
Join Date: October 26, 2012
Location: Texas
Posts: 259
Trail Boss and HP38/Win 231 is what I use






Ike
BigTex308 is offline  
Old February 7, 2013, 10:23 PM   #7
zxcvbob
Senior Member
 
Join Date: December 20, 2007
Location: S.E. Minnesota
Posts: 4,184
I like Promo (bargain basement Red Dot.) Clays is pretty close; you should try that since you have it already.
__________________
"The only way to stop a bad guy with a gun is with a good guy with a gun"
zxcvbob is offline  
Old February 7, 2013, 10:43 PM   #8
towboat-er
Senior Member
 
Join Date: December 2, 2011
Posts: 146
I too enjoy using fffg black powder in 45 colt. Man,,,what a boom.
towboat-er is offline  
Old February 7, 2013, 11:58 PM   #9
Pathfinder45
Senior Member
 
Join Date: January 7, 2008
Posts: 919
Black-powder in 45 Colt

Quote:
I too enjoy using fffg black powder in 45 colt. Man,,,what a boom.
It's enlightening. It's part of why we chose the 45 colt. Think about it: You could have chosen a 44 magnum and it might have served you better. But no, the 45 has this sort of hallowed mystique from the Old West about it that the 44 magnum doesn't. Load it with a full compressed charge of fffG black-powder; the results will be impressive! It will drive a 255 grain lead bullet close to 1,000 fps.
Pathfinder45 is offline  
Old February 8, 2013, 09:20 AM   #10
twobit
Senior Member
 
Join Date: February 25, 2010
Location: Coyote Creak, SW Texas
Posts: 564
I use Trailboss for target shooting and Unique for hunting/defensive loads. The bullets I load for target are either 200 grain or 250 grain RNFP lead. For hunting/defensive I use 250 grain Speer Deep-Curl HP
__________________
Twobit,
LEO, NRA member, Native Texan. Shooting and hunting for over 49 years!
twobit is offline  
Old February 8, 2013, 10:39 PM   #11
orionengnr
Senior Member
 
Join Date: July 9, 2004
Posts: 4,985
I have used Unique, W231 and Green Dot with equal success.
That is for 200 gr lead SWCs up to 255-265 Keith style lead.
orionengnr is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08955 seconds with 9 queries