The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools
Old February 4, 2013, 08:28 PM   #1
idahoJoe
Member
 
Join Date: February 2, 2013
Posts: 20
M&P pro Apex extractor

Hi every one,

I am farely new to automatic had guns but not new to shooting.

I just purchased as M&P pro and so far I like it. The trigger is a touch heavy but it breaks clean enough for me. Also on the internet I read about extractor problems that and Apex extractor cures. I was wondering if I should by this now or if I should weight until I have a FTE or has S&W fixed the problem was it really ever a major concern in the first place. So for I only have 12 rounds through it but no problems.
idahoJoe is offline  
Old February 4, 2013, 08:30 PM   #2
chris in va
Senior Member
 
Join Date: December 26, 2004
Location: Louisville KY
Posts: 12,542
Just wait and see if you have a problem before adding parts.
chris in va is offline  
Old February 4, 2013, 11:43 PM   #3
+1k ammo
Senior Member
 
Join Date: January 9, 2013
Posts: 191
I would give it a few more than 12 rounds to see if things smooth out a bit.

Is that the one with the fiber optic front site - I had looked at the pro model but could not find one at the time I was looking. I thought it was a pretty nice piece.
+1k ammo is offline  
Old February 5, 2013, 08:05 AM   #4
idahoJoe
Member
 
Join Date: February 2, 2013
Posts: 20
Sorry if my orginal post is unclear. I haven't had any problems yet but I was curious how many rounds it takes to determine if your in the clear.

+1k ammo. It is the model with tritium night sights.

thanks for the replies.
idahoJoe is offline  
Old February 5, 2013, 01:32 PM   #5
Hoosier_Daddy
Senior Member
 
Join Date: January 27, 2011
Location: Lower Michigan
Posts: 163
Welcome to the forum Idaho Joe.

I haven't heard about issues with the M&P Pro's extractor. Doesn't mean there isn't an issue, I've just never heard of it. Please let me know what you heard about the pro extractor.

I've had 0 FTE or FTF out of > 2000 rounds through my M&P9 Pro.

Last edited by Hoosier_Daddy; February 6, 2013 at 08:25 AM.
Hoosier_Daddy is offline  
Old February 6, 2013, 12:52 AM   #6
MGMorden
Senior Member
 
Join Date: April 3, 2006
Posts: 123
I run just about all the Apex parts except the extractor in mine. The CAEK and RAM did a lot to help the trigger, but as to the extractor I haven't had enough problems out of mine that I felt I needed to replace it.

The gun will jam if it gets dirty, but it takes me about 400-500 rounds of my fairly dirty reloads (Unique with cast lead bullets) before that becomes an issue. I have other load recipes that burn a bit cleaner that don't gunk it up as bad.

Just clean the gun every other outing or so - take a dental pick and make sure you scrape any crud out from under the extractor hook.

As long as I do that, my gun runs 100%.

Last edited by MGMorden; February 6, 2013 at 08:04 AM.
MGMorden is offline  
Old February 6, 2013, 12:56 AM   #7
allaroundhunter
Senior Member
 
Join Date: May 6, 2012
Location: Southeast Texas
Posts: 1,670
Joe, I have close to 2,750 rounds through my M&P in just over a year. The first time that the ejection has been anything but consistent was when I shot a steel challenge match this weekend. I had one piece of brass ejected back into my face. All other 2,749 rounds have ejected to 5 o'clock and clustered together very well.

In short, don't buy a new extractor yet. If it ain't broke, don't "fix" it.
allaroundhunter is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07292 seconds with 9 queries