The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: General Handgun Forum

View Poll Results: actual experience with taurus
Never owned one, but would if the right deal came along 42 11.76%
never owned one and never will 22 6.16%
owed/still own taurus handguns with no issues 198 55.46%
owned/still own taurus hanguns with problems 95 26.61%
Voters: 357. You may not vote on this poll

Reply
 
Thread Tools
Old February 4, 2013, 10:42 PM   #51
Venom1956
Senior Member
 
Join Date: October 4, 2008
Location: WI
Posts: 2,905
Looks alot better then my 990!

Also I think there is alot of variation of the expectations of each individual shooter in terms of what is quality and what is 'GOOD' in a fire arm. I've heard people claim their stock Glock 17s break like a good 1911 trigger... which is frankly due to design impossible.
__________________
E-Shock rounds are engineered to expend maximum energy into soft targets, turning the density mass into an expanding rotational cone of NyTrilium matrix particles, causing neurological collapse to the central nervous system.- Yeah I can do that.
I guarantee you will know it if a bicyclist hits your house going 1000 mph.
Venom1956 is offline  
Old February 4, 2013, 10:50 PM   #52
LockedBreech
Senior Member
 
Join Date: July 6, 2009
Location: Wyoming
Posts: 2,934
Quote:
Originally Posted by Valerko View Post
Considering Taurus is owner of Remington and probably more US gun makers , you should look at whoooole thing differently now.
Taurus is a possible purchaser of Freedom Group, but last I checked the transaction hadn't happened. Do you have newer info?
LockedBreech is offline  
Old February 4, 2013, 11:52 PM   #53
Crankylove
Senior Member
 
Join Date: July 8, 2008
Location: The land of green Jello and vanilla icecream
Posts: 1,273
I have never personally owned a Taurus...........because family members bought some first, and after thier experiences, the thought of owning one never crossed my mind again.

My fathers 6 shot, blued snubbie in .38 special is typical of what I have seen with my own eyes in other family and friends Taurus firearms. He put about 50 rounds of .38 Specials (not +P) through it before it locked completely.......cylinder, hammer, trigger all frozen solid. Sent it back to For repair, and about 5 months later Taurus finally got around to looking at it, discovered the frame had been machined so far out of spec in thier factory, that they declared it wasn't safe to even fix it (which makes you wonder how it passed there QC to start with) and replaced it with a different model revolver without even consulting my father first.

New revolver gets about 200 rounds through it when the cylinder starts free spinning at random, and when it does actualy lock up, it's so far out of time, the firing pin is striking the rim of the cartridge.

Now he is stuck with another paperweight that isn't safe to shoot, he can't in good conscience sell to anyone knowing the problems it has, and to send and TRY and get repaired could take anywhere from a couple weeks to several months..........and may or may not be fixed when it comes back, or even be the same firearm.

If that is what the good quality Taurus guns are, I can do without them.
__________________
The answer to 1984 is 1776

Last edited by Crankylove; February 5, 2013 at 12:05 PM. Reason: Spelling error
Crankylove is offline  
Old February 5, 2013, 01:48 AM   #54
skidder
Senior Member
 
Join Date: August 17, 2008
Location: Montana
Posts: 628
I've owned two and they both had problems. Sent one back with no success; fixed it myself and then sold it. The other needed to be sent back, but by that time I was done. Sold it "as is" for half price.

I've been jaded by their product and their so called "warranty".
__________________
Gun permit?? A bread crumb tossed to a sleeping society awoken by the sound of complacency. "They are for your own good", and "you will understand when you see all the lives they save". Yes master, what else will you toss me from your bag of infringements?? Do you want me to roll over and play dead? I do that very well. --skidder
skidder is offline  
Old February 5, 2013, 02:20 AM   #55
Ben Towe
Senior Member
 
Join Date: March 6, 2009
Location: Middle Tennessee
Posts: 1,120
I chose "Never owned one and never will" but it needs clarification. While I haven't personally owned one, a couple of my friends do and I have shot them quite a bit. One (a 1911) runs like a Singer sewing machine, the other, a Millennium .45 (can't remember the model number) is a major jam-o-matic. The only thing you can be certain will go bang is the first shot. After that it's a coin flip. That experience combined with the many horror stories are enough to keep me away. While there are undoubtedly worse choices out there, there are a lot of better ones as well.
__________________
'Merica: Back to back World War Champs
Ben Towe is offline  
Old February 5, 2013, 03:41 AM   #56
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: 1B ID
Posts: 6,646
Quote:
Originally Posted by TennJed
Not sure why you think I am ignoring anyone. I am neither a fanboy or a basher. I have had limited experience with them and wanted to see how the poll numbers shook out with people tha have owned them and had problems vs no problem. You can obviously choose the option for owned with problems. If you notice there is no option for love them either. I guess by your reasoning I have ignored that large group of people. Your "ignorance is bliss" comment is misguided.

I am simply looking for numbers on how many people have owned and had problems vs no problem. The people like yourself that hate them can feel right at home on the last option.
My original question (which you ignored) was directed at you.
The comment you quoted was directed at James K.
__________________
"Such is the strange way that man works -- first he virtually destroys a species and then does everything in his power to restore it."
FrankenMauser is offline  
Old February 5, 2013, 05:31 AM   #57
Mrgoosell
Member
 
Join Date: January 19, 2013
Posts: 24
I bought a taurus 990 22lr. Im not happy with the purchase, the gun fires fine never had a problem. The thing that is annoying is the empty shells are very very hard to get out. Most of the time i have to jam on the ejector rod extremely hard. Ill wont buy a taurus again unless I shoot it first.

Sent from my SPH-D710 using Tapatalk 2
Mrgoosell is offline  
Old February 5, 2013, 06:48 AM   #58
patriotic
Member
 
Join Date: November 22, 2009
Location: Ohio
Posts: 69
Send it in and get it fixed. Problem most likely is the extractor. It is a machine, things happen.
patriotic is offline  
Old February 5, 2013, 08:17 AM   #59
Mrgoosell
Member
 
Join Date: January 19, 2013
Posts: 24
Quote:
Originally Posted by patriotic View Post
Send it in and get it fixed. Problem most likely is the extractor. It is a machine, things happen.
It was sent in, it came back 2 months later exactly the same.

Sent from my SPH-D710 using Tapatalk 2
Mrgoosell is offline  
Old February 5, 2013, 08:36 AM   #60
CajunBass
Senior Member
 
Join Date: May 6, 2005
Location: Chancellorsville, Virginia
Posts: 3,397
I've owned four Taurus revolvers. Only one did I shoot extensivly, but that one a Model 82? (Fixed sight, 4" barrel, 38, more or less a Model 10 copy). That one I shot quite a bit, mostly using wadcutter loads. Other than ugly grips, I had nothing to grip about.

The other three, a Model 66, an 85, and a 94, I didn't really shoot a lot, but never had any trouble with, but I traded/sold them all off for something else. Now, to be fair, I have also traded off a number of Smith & Wesson, Colt, and Ruger revolvers. I just buy, sell and trade a lot.

No, I don't think they're "just as good" as the big three, but I don't think they're bad either.
__________________
For God so loved the world, that He gave His only begotten Son, that whoever believes in Him should not perish, but have everlasting life.
John 3:16 (NKJV)
CajunBass is offline  
Old February 5, 2013, 09:04 AM   #61
ndking1126
Senior Member
 
Join Date: January 26, 2008
Location: One house left of my neig
Posts: 1,644
I've owned one Taurus. It was a .357 revolver and I liked it.. until it jammed. I'm not up on revolver terminology, but the piece you push to eject spent shells became loose while I was shooting. The cylinder was caught half way between shots and I couldn't get it open or rotate it to the next shell to fire it. The specific details on how I finally got it out I can't remember (this was back in 2006, 2007), but it took about 45 minutes.

It really ruined me on Taurus and revolvers of all types. I'd rather have to deal with a semi-auto pistol's jam anyday of the week. The only reason I bought it was because supposedly revolvers don't jam and are more reliable than semis. I sold it as soon as possible.
__________________
The Jeep has been a lot of fun, but time to come back to my first hobby.. shooting.
ndking1126 is offline  
Old February 5, 2013, 09:12 AM   #62
Lt. Skrumpledonk Ret
Senior Member
 
Join Date: May 30, 2012
Location: Oh, Jesus.
Posts: 201
TCP .380

I've shot a Taurus tcp alot. It consistently ejects cases into the shooters face.
Lt. Skrumpledonk Ret is offline  
Old February 5, 2013, 09:20 AM   #63
eldermike
Senior Member
 
Join Date: January 24, 2013
Location: NC
Posts: 545
NDking, I am not trying to sell Tarurus by any means. However, this past weekend I had to open a S/W 686 for a person at the range. I did this because there were unfired rounds in the weapon and I did not like the way this person was attempting to free the cylinder. Note: There were some recalls on some of these models some years back.
eldermike is offline  
Old February 5, 2013, 09:23 AM   #64
94bluerat
Senior Member
 
Join Date: May 30, 2007
Location: South of Canada
Posts: 201
I occasionally shoot a 709. It was having feed issues. We called Taurus, they said "send it in". We suggested it was a magazine issue. They said OK and mailed out a new mag.

No issues since then.

The spring on the new mag is a little longer than the original.

Got no problems with them. Based on my experience their customer service was very good.

"your mileage may vary"

Cheers!
__________________
"Got a shotgun, a rifle and a four wheel drive" - HW Jr.

Rifleman
BSA Eagle Scout
94bluerat is offline  
Old February 5, 2013, 10:15 AM   #65
Scout
Senior Member
 
Join Date: August 9, 2009
Location: Central Florida
Posts: 464
I have only one, a Tracker in .44 mag. When I bought it I had no ill feelings toward Taurus firearms as I had never owned one. This particular revolver has worked well so far, but I've only put about 250 rounds through it.
__________________
God bless the U.S. Cavalry
Scout is offline  
Old February 5, 2013, 10:39 AM   #66
Skans
Senior Member
 
Join Date: November 20, 2008
Posts: 7,685
Had a PT99. Locking block shattered. This wouldn't have been a catastrophic failure, except the design of the gun doesn't lend itself to getting it apart when this happens. When my locking block broke, it acted like it was just "jammed". So, in the process of trying to get the slide back the schards of steel wedged their way between the slide and the soft aluminum rails. Getting the gun apart gouged up the soft aluminum rails pretty badly, but still serviceable. I had to have a gunsmith get it apart and fit a new locking block to it. The replacement locking blocks from Taurus looked like cheap cast parts

Years later, Taurus admitted there was a problem with the locking blocks and stated the "fix" for this is to cut the barrel in sections so as to get the gun apart when this happens. So, my opinion is that its just not a good design.

Last edited by Skans; February 5, 2013 at 11:03 AM.
Skans is offline  
Old February 5, 2013, 11:04 AM   #67
Single Six
Senior Member
 
Join Date: January 31, 2010
Location: N.C.
Posts: 1,522
I've owned several Taurus PT series pistols, and the only reason I don't still have them is because I didn't take Cheapshooter's advice. Still, I found them to be wonderfully reliable pieces; no complaints here. Now then, if you want to talk about pistols I've found to be unreliable and would never buy, pull up a chair and let's talk about Sigs.......
__________________
Seen on a bumper sticker: "Exercise. Eat right. Take vitamins. Die anyway."
Single Six is offline  
Old February 5, 2013, 11:26 AM   #68
coop2564
Senior Member
 
Join Date: March 4, 2011
Location: Frisco, TX
Posts: 319
I've got 3 and all are good guns.
coop2564 is offline  
Old February 5, 2013, 03:26 PM   #69
ndking1126
Senior Member
 
Join Date: January 26, 2008
Location: One house left of my neig
Posts: 1,644
Quote:
I had to open a S/W 686
eldermike,

yeah, I figured Taurus couldn't be the only revolver that suffer from this malfunction. I wasn't aware of any recalls, maybe mine was one that was recalled? Either way, the pistol is long gone. You're story seems to validate my dislike for revolvers all together.

I pulled up Taurus's website and what I had was exactly like their 608, although I don't know if that's the same model I had.. 8 shot, ported, rubber grips, stainless. I also found an older post of mine saying how I liked it based on my experience up to that point, haha.
__________________
The Jeep has been a lot of fun, but time to come back to my first hobby.. shooting.
ndking1126 is offline  
Old February 5, 2013, 03:53 PM   #70
jasmith85
Senior Member
 
Join Date: April 6, 2012
Location: Tennessee
Posts: 272
The only thing from Taurus that I've owned was a Rossi 357 snubby. I only put a few hundred rounds through it the entire time I had it but it functioned perfectly and was very accurate for a gun its size.
jasmith85 is offline  
Old February 5, 2013, 05:11 PM   #71
rodfac
Senior Member
 
Join Date: January 22, 2005
Location: Kentucky
Posts: 1,512
Never owned one...but spent several afternoons here on our farm with friends who tried out their new "Judges". All three had triggers that a gorilla would have trouble pulling, but were good enough to keep the .45 Colts on a piece of copy paper at 21 feet...and that's good enough for across the bedroom shots, so long as you had strong hands to pull that abominable trigger. Accuracy was something else however.....

As I've stated here before, the Federal brand buckshot loads failed to penetrate soft poplar fencing material...at 21 feet...I wonder how they'd perform on a well dressed intruder. The .45's did much better, fully penetrating and leaving those really big holes...the trouble was that they'd managed to key-hole at 21 feet! It was a palm sized group at that distance with me doing the shooting so I can't lay it off to an inexperienced shooter....

I'd not buy a Taurus based on the examples I've seen in person, nor for the lack of customer service reported here and elsewhere on the net.

Finally, one poster here reported that Remington is now owned by the Taurus people....hope to gosh that's not true....

Rod
__________________
Our Flag does not fly because the wind blows against it, it is moved instead, by the dying breath of our patriots in uniform. Our Freedom is not free, it's been paid for many times over.
USAF Forward Air Controller, 5th Spl Forces,
An Loc, lll Corps, RVN, 69-70, Vietnam Vet '69-'73
rodfac is offline  
Old February 5, 2013, 05:29 PM   #72
Cheapshooter
Senior Member
 
Join Date: December 2, 2007
Location: Missouri
Posts: 4,194
Rodfac, I have to say at 21 feet, or for me more correctly 30 feet because the range I usually shoot at has the closest target stand at 10 yards, my PD Poly keeps Winchester Silvertip 45 Colt rounds in a small coffee cup lid sized group. And makes nice round holes doing it.
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING!
Cheapshooter is offline  
Old February 5, 2013, 05:44 PM   #73
oldgunsmith
Senior Member
 
Join Date: January 9, 2013
Posts: 278
Every now and then a security guard shows up to qualify with a Taurus. No major Police Dept. I know of allows them on duty. They've seen too many of them on the range. Hard to be specific. Everything from sights falling apart to revolvers worn out of acceptable time in less than 600 rounds.
oldgunsmith is offline  
Old February 5, 2013, 09:01 PM   #74
ET.
Senior Member
 
Join Date: June 8, 2010
Location: Savannah, Ga.
Posts: 638
I've owned 4:

1/ PT111 Mil Pro...Never had a problem in 4 years with some 3000 rounds.
2/ Judge Ultra-Lite...No problems in 3 years
3/ PT1911 9mm...Wife's range gun. Only ftf's when I get lazy and don't clean it after 2 or 3 range trips.
4/ PT738 TCP...One of the first runs of this model that were known for ftf problems. Mine has been jambing for about a year. I'm just too lazy to call Taurus and get it fixed. I don't carry it anyway.
__________________
Soldiers are dying every day to protect our freedoms. The least we can do is vote.
ET. is offline  
Old February 6, 2013, 01:01 AM   #75
Niner4Tango
Senior Member
 
Join Date: May 28, 2007
Location: Vancouver, WA
Posts: 250
I like the Taurus "J-frames" ok. But I totally agree with aarondhgraham in post 28. I do trust this one, though (650 CIA, 357 mag):

Niner4Tango is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.15585 seconds with 11 queries