The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old February 1, 2013, 06:36 AM   #1
Newton24b
Junior member
 
Join Date: February 10, 2009
Posts: 974
mosin 91/30 bayonet

heres a good question, how do you reverse mount the bayonet on your 91/30 for "vehicle transport/quardroom storage"?

i read a magazine and said you simply mount in reverse with bayonet blade on left side. can anyone show a picture or to/ sounds a good way to keep it from getting lost.

does it affect accuracy when shot with it mounted this way?
Newton24b is offline  
Old February 1, 2013, 10:39 AM   #2
tater134
Senior Member
 
Join Date: August 22, 2009
Location: NE,PA
Posts: 390
You can slide it backwards onto the muzzle but without any way to lock it the bayonet is not going to stay on very well. Like the article said reversing the bayonet is just for vehicle transport and storage. If you tried shooting the rifle with the bayonet on backwards you would most likely end up launching it downrange.
tater134 is offline  
Old February 3, 2013, 11:59 AM   #3
m&p45acp10+1
Senior Member
 
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,310
If the reason for taking the boyonette is for keeping it shooting straight. Well there is a simple solution to that. A hammer, a drift punch, a few tagets, and some ammo. Work at 25 yards to get it lined up. Fire 2 shots if they are both right then take the punch and hammer then tap the front sight to the right with a tap, tap, tap, tap. Fire another 2 shots. Repeat adjustments till the sight is lined up that the shots are going dead center at 25 yards.


If you decide you want to take it back to the settng it was from the factory there is a line on the sight, and receiver tap till they line up it is back to default factory setting.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.
m&p45acp10+1 is offline  
Old February 3, 2013, 05:45 PM   #4
kilimanjaro
Senior Member
 
Join Date: November 23, 2009
Posts: 1,902
Mine are stored either on the rifle in a wall rack, or point down in a hole in the rack next to the rifle muzzle, but for transport, just remove it. If you want to conceal/protect it, wrap in butcher paper and place in a 2" diam. PVC tube.
kilimanjaro is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06213 seconds with 9 queries