|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
February 1, 2013, 08:19 PM | #1 |
Member
Join Date: January 12, 2013
Posts: 33
|
870 police magazine retention spring installer tool
We have quite a few 870 Police magnums that have a metal magazine Spring Retainer. I was advised by remington that they sell a tool kit that contains a Magazine Retention Spring Retainer Installer Tool, which makes placing the retainer an easier task. The kit comes with many tools and is rather expensive. Would anyone know if this tool is sold by a third party company? These metal plugs are not the screw intype and are somewhat difficult to put back in.
Thank you. REM1 |
February 1, 2013, 08:36 PM | #2 |
Senior Member
Join Date: May 4, 2001
Posts: 7,478
|
Once you figure out the technique of installing and removing them, it's really rather easy.
However, Brownell's sell special tools: http://www.brownells.com/gunsmith-to...prod25275.aspx http://www.brownells.com/gunsmith-to...-prod8875.aspx Note the videos on how they work. |
February 1, 2013, 08:36 PM | #3 |
Member
Join Date: January 12, 2013
Posts: 33
|
86 This I found the Magazine Retainer tool
|
February 1, 2013, 08:43 PM | #4 |
Member
Join Date: January 12, 2013
Posts: 33
|
Thank you Defariswheel
Thank you. We strip down, oil and then wipe dry a bunch every week and I hope this will make it a little easier.
Have a good weekend. REM1 |
February 1, 2013, 10:11 PM | #5 |
Staff in Memoriam
Join Date: November 13, 1998
Location: Terlingua, TX; Thomasville, GA
Posts: 24,798
|
Question answered.
|
Thread Tools | Search this Thread |
|
|