The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 31, 2013, 06:07 PM   #1
s2thalayer
Senior Member
 
Join Date: December 22, 2009
Location: Danville, VA
Posts: 101
Questions on painting a rifle

I'm working on some AK kits right now that I got before the panic, and want to do some unique things with them. I had this blasphemous idea to put an American flag on an AK. It was kind of a joke idea, but then I got to thinking that may look good on an AR, or maybe something like a Confederate flag, seeing as I've never seen that done.

So, I googled over and over, and all I can find are fill ins for serial numbers, camo painting, and super professional jobs that they don't really explain how they did it.

If I'm correct, there are two ways that I have seen so far. Krylon spray paint by itself (after a base coat, of course) is one. The other is airbrushing. I have no experience airbrushing, but I am an artist, so I figure "how hard could it be?" From what I understand you need some kind of base coat (not krylon, because it can't be baked), bake it, do your painting, bake, then clear coat.

The Krylon option concerns me because I don't see how that would hold up to the heat on an AR.

So does anyone know of any good techniques to actually do painting that is NOT camouflage, but actual artwork on aluminum of an AR15? Actually, the carbon material, also. And can any actual freehand painting be done?

Thanks in advance. I wasn't sure what forum to put this under, but this looked as good as any.
s2thalayer is offline  
Old January 31, 2013, 11:03 PM   #2
Creeper
Senior Member
 
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
Use automotive engine paints... they come in a variety of colors and can take substantial heat. They tend to come in spray bombs at the local auto parts, but Restomotive Labs and others (like Eastwood for example) carry a multitude of engine enamels in pints.

C
__________________
Shoulder Drive Nicholson Club
Creeper is offline  
Old February 1, 2013, 12:05 AM   #3
F. Guffey
Senior Member
 
Join Date: July 18, 2008
Posts: 2,754
Degrease the metal, then etch the metal to give the paint something to hold on to. Aluminum, I use vinegar diluted with water, for metal I use an acid on clean degrease metal.

I have not finished the project but plain to paint a Mauser receiver with Zinc. If for some reason it does not work out, there is paint remover.

F. Guffey
F. Guffey is offline  
Old February 1, 2013, 06:54 AM   #4
s2thalayer
Senior Member
 
Join Date: December 22, 2009
Location: Danville, VA
Posts: 101
Alright, would that need to be baked?
s2thalayer is offline  
Old February 1, 2013, 09:40 AM   #5
F. Guffey
Senior Member
 
Join Date: July 18, 2008
Posts: 2,754
Bake? Porcelain is sprayed on case iron, then, baked, same with frying pans etc.. Then there is baked on enamel, porcelain and baked on enamel are unfinished before baking, something like spraying on glass beads with a glue binder. Problem, there is no give or flex and it chips like glass. My opinion glass that chips is not something a shooter wants setting along side their head while shooting, smooth, gloss with a shine, yes.

Take what ever you have to paint to a motor cycle paint shop, but first determine how much you want to pay when repairing a dent, scratch or chip.

F. Guffey
F. Guffey is offline  
Old June 10, 2013, 05:50 AM   #6
runninghorsegoeswild
Junior Member
 
Join Date: June 9, 2013
Posts: 1
Flat heat paints???

Hi guys new here. I picked up an AK Sporter cheap cheap!!
Needs a little refinishing. Shoots as true as any AK I have fired in the past so thats good. The barrel looks good etc. just needs a stock refinish and recoating.
Have any of you all tried high heat header paints used to paint exaust headers on cars??? Seems to me they would work well???
runninghorsegoeswild is online now  
Old June 10, 2013, 06:39 AM   #7
Dixie Gunsmithing
Senior Member
 
Join Date: April 27, 2013
Location: Ohio
Posts: 860
runninghorsegoeswild,

Though I've never done it, a friend ended up with a cheap Chinese 9mm, and painted it with something similar, and said it worked out okay, but as far as wear, I can not say. Duracoat and others do tend to ware well, but they are baked on finishes. There is also the military standard Parkerising too. You can get the kits from eBay, and Caswell.
Dixie Gunsmithing is online now  
Old June 10, 2013, 12:11 PM   #8
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,484
GunKote. It comes in many, many colors. You bead blast the metal, spray the base color on with an airbrush, then bake. Then just mask and spray for the design colors If you know how to do multi-masking, it's a snap. If not, you can still do multi-color designs, you just have to either make sure you are not taping on top of other colors when you mask, or bake between coats.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07335 seconds with 9 queries