January 26, 2013, 09:22 PM | #1 |
Member
Join Date: January 21, 2013
Posts: 18
|
help with my "nine"
I have a jimenez 9mm that I just bought the trigger didnt feel right so i thought I would open it up and see well needless to say I cant put it back together. I took the slide off and then the grips and I cannot figure out where all the little parts go. What should i do?
|
January 26, 2013, 10:53 PM | #2 |
Senior Member
Join Date: May 29, 2011
Location: Missouri
Posts: 1,097
|
Google Jimenez 9 assembly instructions. You should find some answers there. Id post a link but im on my galaxy s3 right now.
__________________
My EDC: Gun Wallet Brain (Use this one the most) |
January 27, 2013, 02:30 PM | #3 |
Member
Join Date: January 21, 2013
Posts: 18
|
I cannot find anything online about how to completely reassemble a jimenez nine
|
January 27, 2013, 02:46 PM | #4 |
Senior Member
Join Date: October 22, 2010
Posts: 449
|
try u tube
__________________
I'm hairbag and I approve this message. |
January 27, 2013, 02:49 PM | #5 |
Member
Join Date: January 21, 2013
Posts: 18
|
Same deal I cannott find a thing.....
|
January 27, 2013, 06:28 PM | #6 |
Senior Member
Join Date: September 28, 2005
Location: Columbus, OH
Posts: 144
|
|
January 27, 2013, 06:57 PM | #7 |
Member
Join Date: January 21, 2013
Posts: 18
|
Nothing there it just shpws how to field strip it. I need complete assembly
|
January 27, 2013, 07:09 PM | #8 |
Senior Member
Join Date: May 29, 2011
Location: Missouri
Posts: 1,097
|
Just buy another one. They are cheap enough.
__________________
My EDC: Gun Wallet Brain (Use this one the most) |
January 27, 2013, 07:15 PM | #9 |
Senior Member
Join Date: February 21, 2012
Location: Wisconsin
Posts: 763
|
See the problem is that you bought a Jimenez 9mm. lol!
Ok seriously though if you completely disassembled the gun and now can't figure out how to put everything back together I'd strongly suggest looking into a gunsmith's services or finding someone nearby that's very familiar with semi-auto striker fired handguns who can help you with reassembly. If there is nobody around that can help you it might actually be wiser to simply buy another gun - this time don't buy a Jimenez. Next time if you decide to disassemble something take photos at regular intervals of the disassembly so you know how parts fit in there at each step.
__________________
This is who we are, what we do. |
January 27, 2013, 07:19 PM | #10 |
Senior Member
Join Date: January 9, 2011
Location: Land of the Free
Posts: 2,834
|
They are cheap pot metal guns, same with a few other companies. They make them in 25acp 380 9mm and 32 sometimes. I seen them in the gun shops, $150 or less for these pot metal guns. I wouldn't trust it, sell it and put it toward an kel tech, it would be better..
|
January 27, 2013, 08:04 PM | #11 |
Senior Member
Join Date: September 28, 2005
Location: Columbus, OH
Posts: 144
|
Dig around on the internet. There is a forum for them, probably can get your questions answered there.
Try this to start: http://www.bryco-jennings-jimenezarm...c6ce152029f64a From my quick google searching that seems to be the hardest part of that thing. This: http://www.gunauction.com/buy/117196...9mm-(inv137432 Cracks me up. |
Thread Tools | Search this Thread |
|
|