The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 25, 2013, 07:55 PM   #1
02bigdogs17
Member
 
Join Date: November 25, 2012
Location: Indiana
Posts: 92
44mag with AA#7

Does anyone have any load data for a 200 grain Raineer flat point bullet with AA#7 powder for 44mag. I don't see anything for that bullet in my load data. I checked 200g jacketed data and they say start with 15.6g but that would be about 1270fps and I have always been told not to run plated bullets over 1200-1250 fps. Thanks for the help.
02bigdogs17 is offline  
Old January 26, 2013, 05:57 AM   #2
jj320
Senior Member
 
Join Date: January 7, 2013
Location: hobart,in
Posts: 105
Have u looked on bear tooth bullets load swap section
jj320 is offline  
Old January 26, 2013, 01:40 PM   #3
jj320
Senior Member
 
Join Date: January 7, 2013
Location: hobart,in
Posts: 105
rainier states if you have taditionally jacketed load data start in the mid load range

sorry didnt completely read the entire post i run the rainer hollow points in my 44mag rifle and am at mid range powder and they do fine no chrono on it yet.
jj320 is offline  
Old January 26, 2013, 09:35 PM   #4
Ozzieman
Senior Member
 
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 4,922
Accurate’s web site has loads for 7 for lead bullets your weight. Plated bullets should be run at the same max velocity as lead.


http://www.accuratepowder.com/wp-con...d_data_3.5.pdf
__________________
“Peace is that brief glorious moment in history when everybody stands around reloading.” – Thomas Jefferson.

Politician's are like diapers.
You need to change them often,,,,, for the same reason!
Ozzieman is offline  
Old January 26, 2013, 09:37 PM   #5
shootniron
Senior Member
 
Join Date: April 16, 2011
Posts: 1,147
It will use the same load as lead and I have used it with my .44mag on several occasions with cast bullets...worked very well.
shootniron is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06664 seconds with 9 queries