The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools
Old January 19, 2013, 07:33 PM   #1
davidsoc
Member
 
Join Date: January 18, 2013
Location: Orange County
Posts: 68
Random Ruger Mkiii 22/45 rust, anyone else have this problem?

Hey all this is my first post here but ive been lurking for a while haha.

I took my Mkiii 22/45 out of the closet to give it a good oiling this week. I field stripped it and when wiping the inside of the rear part of the upper (where the rear 2" of bolt would sit when closed) my rag came out rusty.

I store it in its plastic case in my closet, with either a nice coating of CLP or pretty wet with oil, and i leave the case cracked open all the time. I haven't fired the gun in a while and cleaned and oiled it the last time i did shoot it, so im not really sure how there could have been rust in there.

I used CLP and just wiped it out until the rag came back clean, i looked after i had cleaned it out and didn't see any pitting or anything, and the rust came out really easily almost like it was just powder on the surface.

Has anyone else had this happen?
If there is no pitting is the rust still likely to come back in that area?



Thanks for any info in advance
-David
davidsoc is offline  
Old January 19, 2013, 10:28 PM   #2
AndyWest
Senior Member
 
Join Date: October 14, 2011
Posts: 621
Does Ruger use anything like the Glock copper-colored lubricant stuff out of the factory? That may be what you're seeing, which would look like powder as you describe, in which case there's no harm.

Can you get a pic of the area in question? Might be hard to get to, but then a good macro shot may help you better see what's in there. In any case, sounds like you take care of it so I wouldn't worry unless it comes back.

[Edit]

Also, do you remember what you shot last? I know when I shot, e.g. Remington goldenwhatevers, they sometimes left copper/gold-colored residue.
__________________
Shoot smart. Shoot S-Mart.
AndyWest is offline  
Old January 20, 2013, 02:09 AM   #3
davidsoc
Member
 
Join Date: January 18, 2013
Location: Orange County
Posts: 68
I dont think it could be anything from the factory as it has around 2500 rounds through it and has been field stripped and cleaned atleast 10 times since i bought it

I think i was last using cci blazers but i could have used federal, winchester, or rem bulk as well, my friends bring their .22's and their own ammo and we kind of just pass our guns and ammo around

I don't have a camera at the moment but i'll get a pic taken tomorrow and post it up
davidsoc is offline  
Old January 20, 2013, 04:35 AM   #4
CajunBass
Senior Member
 
Join Date: May 6, 2005
Location: North Chesterfield, Virginia
Posts: 3,466
I suspect what you're seeing isn't rust, but the oil Ruger ships their guns packed in. That stuff will seap out for a long time unless you used something like Gunscrubber or brake cleaner. CLP's and other oils just dilute it and let it weap out more.

(If you use "Gunscrubber" on a 22/45 make sure it's the "ploymer safe" version. I wouldn't use brake cleaner at all.)
__________________
For God so loved the world, that He gave His only begotten Son, that whoever believes in Him should not perish, but have everlasting life.
John 3:16 (NKJV)

Last edited by CajunBass; January 20, 2013 at 07:33 AM.
CajunBass is offline  
Old January 20, 2013, 05:33 PM   #5
davidsoc
Member
 
Join Date: January 18, 2013
Location: Orange County
Posts: 68
CajunBass ok thank you i didnt realize it would seap out for so long, i think i will just quit worrying about it and use CLP or hoppes until its all out
davidsoc is offline  
Old January 21, 2013, 01:00 PM   #6
Walt Sherrill
Senior Member
 
Join Date: February 15, 1999
Location: Winston-Salem, NC USA
Posts: 4,470
If it turns out what you saw was rust -- probably wasn't -- you should understand that storing in a plastic bag can keep moisture out, but can also lock moisture in, if the air is humid when you close the bag.

Getting some of the little "stay dry" (dessicant) packs to go into the plastic bags also makes sense. You can buy them from some gun shops, and you'll often get them free, as they often come in packages when you receive gun/electronics gear from an online store.)
Walt Sherrill is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:54 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06534 seconds with 9 queries