The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: General Handgun Forum

Reply
 
Thread Tools
Old January 19, 2013, 12:25 AM   #126
bustersmaster
Senior Member
 
Join Date: February 8, 2006
Posts: 182
I've gone through several guns over the years that were'nt good enough to keep and wound up selling/trading them all off.
The worst one was probably the first handgun I owned, a Jennings/Bryco in 9mm. The triggerguard was purposely designed large enough for 2 fingers on the trigger (with a 2 handed grip) and it seemed like it needed room for a couple more. Probably had a 20 lb. trigger pull. Looking back on it, I learned a lot as a new shooter. After getting used to that horrible trigger pull, every decent gun I've owned since has made me look pretty good.
bustersmaster is offline  
Old January 19, 2013, 03:04 AM   #127
jason_iowa
Senior Member
 
Join Date: July 30, 2011
Posts: 686
Browning buckmark. I'm sure it was was just a case of a lemon but it was an awful gun. Bought it, cleaned and lubed it, fired it. Slide gouged the heck out of the frame. Took it back they said they would not take it back because I obviously did something wrong. I finally got them to take it back after we took it apart and started doing some measuring and the machining was way off.

Did not stop me from buying more Browning products.
jason_iowa is offline  
Old January 20, 2013, 08:29 AM   #128
1stmar
Senior Member
 
Join Date: March 21, 2012
Location: Connecticut
Posts: 1,080
Tz-75 9mm/41ae

TZ-75 stainless in 9mm/41ae barrel, the tooling was so bad it look like they cut the slide and frame rails with a chainsaw. I had Bruce gray work on it but it was never right. I wish it had been, I love the cz model and while its dead now, I really liked the 41ae and the modular concept.... Damn 40sw...never bought another stainless semi
1stmar is offline  
Old January 20, 2013, 09:19 AM   #129
UtahHunting
Senior Member
 
Join Date: March 26, 2009
Location: Salt Lake City, UT
Posts: 424
Walther P-22. Picked one of these up a few years ago and could not get through a single magazine without jamming. Tried every type of ammo out there and just would not run. Sold it after the first week with full disclosure.
UtahHunting is offline  
Old January 20, 2013, 10:42 AM   #130
GreaseMonkey4Hire
Member
 
Join Date: November 17, 2012
Location: Northern Missouri
Posts: 20
Jennings .22 pistol. Has never made it past the 2nd round without Jamming but it was my grandmothers and is sentimental so it lives in the bottom of the safe.
GreaseMonkey4Hire is offline  
Old January 20, 2013, 02:57 PM   #131
tristar viper
Senior Member
 
Join Date: August 8, 2009
Location: Ohio
Posts: 889
This is easy; a Weatherby PA-08 12ga shotgun. On only the 2nd time out the trigger mechanism (a completely cheezy plastic set-up) completely broke and left me with no gun. I emptied out the gun, and I was so completely irate I threw it against a block wall....the stock flew off, the barrel bent, it was in like 4 pieces and I did NOT care and still don't. Put the pieces in the trash and set it to the curb. No remorse here, pc. of cheap garbage anyway.
tristar viper is offline  
Old January 20, 2013, 11:07 PM   #132
Crankgrinder
Senior Member
 
Join Date: July 24, 2011
Location: Texas
Posts: 646
Mine was a taurus pt111 pro. Nothing wrong with the guns function. It shot without hiccup, it was just that it shot low ( 3 dot sights). No aftermarket sights available only other option was grinding the front post to a nub + bad grip angle for me. Happy i traded in and pain a couple hundred on top on a glock 19 for carry. Glad i did.
Crankgrinder is offline  
Old January 20, 2013, 11:52 PM   #133
SDF880
Senior Member
 
Join Date: November 14, 2009
Location: Louisville, KY
Posts: 109
My PT-22 .22LR. Looks good, feels good, and jams with any/all ammo! This is by far the biggest POS paperweight I have. I'll never buy anything from that company again!
SDF880 is offline  
Old January 21, 2013, 07:14 PM   #134
sho'nuff
Member
 
Join Date: September 10, 2009
Location: Surprise, AZ
Posts: 41
worst i've owned was the diamondback db 9. Pos never cycled right. I sent it back to diamondback twice and all they managed to accomplish was to make the trigger worse. I traded it at a gunshow for a gen 2 glock 19.
sho'nuff is offline  
Old January 24, 2013, 09:16 PM   #135
Revolver1
Junior member
 
Join Date: January 21, 2013
Location: NY
Posts: 150
Any of the Rugers I HAD.
Revolver1 is offline  
Old January 25, 2013, 06:23 AM   #136
thedudeabides
Senior Member
 
Join Date: August 22, 2012
Posts: 981
Worst? Ever?

That title now has to go to my LCP.

Nasty recoil that beats up my trigger finger. Inaccurate. Hard to hold with large hands. Nonexistent sights. Way too many failures--but I was told that "keep shooting it, it will get better." Elsie pea forum told me to get different recoil springs to keep the ejected brass out of my face. Didn't work. Got some Hogue grips for it, didn't help. I spend bodyguard money to turn a **** into a more expensive ****.

Whatever, this gun is crap.

It is super concealable, but not worth it since much better guns like the Bodyguard are just a BIT larger.

Oh, and the pins back out of the frame when shooting.
thedudeabides is offline  
Old January 25, 2013, 01:09 PM   #137
capt Ajax
Member
 
Join Date: September 28, 2005
Location: Knoxville, TN
Posts: 28
Imitation Walther PPK. I think it was made in Rusia. It looked cool but would jam at least once EVERY time I shot a magazine of rounds.....no matter what .380 ammo I tried to use it always jamed. Sold it at a gunshow for $300
__________________
The Second Amendment is in place in case they ignore the others!
capt Ajax is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10013 seconds with 9 queries