Ruger SP101 9mm Price Check

DTrain · January 14, 2013, 02:11 PM

Is $950 for a Ruger SP101 in 9mm with some moon clips really the going price on these?

Redhawk5.5+P+ · January 14, 2013, 05:30 PM

Well all things considered, to me, these basically are a rare find, so obviously in the here and now, although being overly priced, good luck finding one at any price.

If I had one to sell today that's about what I would ask. My self I couldn't see me paying more than $400ish.

TBS, I'm happy with my SP101 3" .357 I'm sure I could have it cut for moon clips.

weblance · January 14, 2013, 05:31 PM

It depends on where its for sale. Pawn shop/gun shop, thats high... Gunbroker, with several interested buyers... it could go even higher.

Redhawk5.5+P+ · January 14, 2013, 06:54 PM

Quote:

TBS, I'm happy with my SP101 3" .357 I'm sure I could have it cut for moon clips.

Moonclip cutting is around $85+this and +that.

DTrain · January 14, 2013, 07:17 PM

Local private sale... States price is firm.

Redhawk5.5+P+ · January 14, 2013, 09:59 PM

Let's see, a 9mm moon clip SP101 over a .357 Moon clip SP101 for almost half. That's just to easy.

weblance · January 14, 2013, 11:47 PM

9mm ammo...50 rounds = $11. 357 ammo... 50 rounds = $27. Thats why I bought my Taurus 905

bossman · January 15, 2013, 02:06 PM

For $950 it better be a Ruger Redhawk .454 Casull. I think the snubnose 9 mm is just a bragging right type of gun, nice but not $950 nice. Some folks have more cents than sense.

WC145 · January 15, 2013, 03:42 PM

At least $300 too high, skip it, if you look around you can find them in the $600 +/- range. They don't bring the same money as the S&W 9mm revolvers.

huntinaz · January 15, 2013, 08:05 PM

I don't see a lot of them, but the ones I have seen sell for ~$550-600.

DTrain · January 16, 2013, 02:09 PM

Thanks guys! I would REALLY like a 9mm revolver as I have settled only having the 9mm caliber at this time for center fire hand guns but I just could not stomach that price.

glenncal1 · January 16, 2013, 02:35 PM

Right now pricing on everything is whacked out, a .327 SP101 just went on Gbroker for $950.

weblance · January 17, 2013, 11:59 PM

DTrain... consider this instead of the SP101 9mm. You can buy one for half of what they are asking for that SP101. Mine is blue, but they are available in stainless also.

http://www.thehighroad.org/showthread.php?t=678182

BigDinFL · January 18, 2013, 12:15 AM

You could always buy the regular SP and have one of the better companies make you a 9mm cylinder

weblance · January 18, 2013, 12:50 AM

Id like to convert a 4" GP100 to 9mm

stormyone · January 18, 2013, 01:25 AM

<<<Id like to convert a 4" GP100 to 9mm>>>

I'd like a 10mm GP 100.

WC145 · January 18, 2013, 10:09 AM

Quote:

I'd like a 10mm GP 100.

Clements Custom Guns can do it for you, I've considered having them convert a 3" GP100.
http://www.clementscustomguns.com/rugerdarevolvers.html

stormyone · January 18, 2013, 06:42 PM

Thanks for that info WC.

hAkron · January 19, 2013, 09:56 AM

I saw one for sale in a gun shop around here (another guy bought it while I was trying to get the salesman's attention). It was under $400 in MINT condition. I would have loved to take that gun home, but it would have just been a novelty. For $900, they better be giving you 3 of them.

stormyone · January 19, 2013, 08:15 PM

That's just an insane price.

January 14, 2013, 02:11 PM	#1
DTrain Member Join Date: March 6, 2008 Posts: 92	Ruger SP101 9mm Price Check Is $950 for a Ruger SP101 in 9mm with some moon clips really the going price on these?

January 15, 2013, 02:06 PM	#8
bossman Senior Member Join Date: November 16, 2010 Location: Arkansas Posts: 987	For $950 it better be a Ruger Redhawk .454 Casull. I think the snubnose 9 mm is just a bragging right type of gun, nice but not $950 nice. Some folks have more cents than sense. __________________ NRA life member When the going gets tough, I just open another beer.

January 15, 2013, 03:42 PM	#9
WC145 Senior Member Join Date: October 18, 2008 Location: Downeast Maine Posts: 1,291	At least $300 too high, skip it, if you look around you can find them in the $600 +/- range. They don't bring the same money as the S&W 9mm revolvers. __________________ If you're going to be dumb you'd better be tough. Stupid hurts.

January 15, 2013, 08:05 PM	#10
huntinaz Senior Member Join Date: September 21, 2010 Location: az Posts: 861	I don't see a lot of them, but the ones I have seen sell for ~$550-600. __________________ Wanted: 50 Beowulf Brass, .500 cal bullets "Once you quit hearing sir and ma'am, the rest is soon to follow." - Cormack McCarthy "I'm just an average Joe, although I did score 4 touchdowns in one game..."-Al Bundy

January 16, 2013, 02:35 PM	#12
glenncal1 Senior Member Join Date: April 21, 2009 Location: Denver area Posts: 378	Right now pricing on everything is whacked out, a .327 SP101 just went on Gbroker for $950. __________________ Jim Many K and N Frames

January 14, 2013, 05:30 PM	#2
Redhawk5.5+P+ Senior Member Join Date: June 4, 2012 Location: NV Posts: 743	Well all things considered, to me, these basically are a rare find, so obviously in the here and now, although being overly priced, good luck finding one at any price. If I had one to sell today that's about what I would ask. My self I couldn't see me paying more than $400ish. TBS, I'm happy with my SP101 3" .357 I'm sure I could have it cut for moon clips.

January 14, 2013, 05:31 PM	#3
weblance Senior Member Join Date: October 3, 2012 Posts: 306	It depends on where its for sale. Pawn shop/gun shop, thats high... Gunbroker, with several interested buyers... it could go even higher.

January 14, 2013, 07:17 PM	#5
DTrain Member Join Date: March 6, 2008 Posts: 92	Local private sale... States price is firm.

January 14, 2013, 09:59 PM	#6
Redhawk5.5+P+ Senior Member Join Date: June 4, 2012 Location: NV Posts: 743	Let's see, a 9mm moon clip SP101 over a .357 Moon clip SP101 for almost half. That's just to easy.

January 14, 2013, 11:47 PM	#7
weblance Senior Member Join Date: October 3, 2012 Posts: 306	9mm ammo...50 rounds = $11. 357 ammo... 50 rounds = $27. Thats why I bought my Taurus 905

January 16, 2013, 02:09 PM	#11
DTrain Member Join Date: March 6, 2008 Posts: 92	Thanks guys! I would REALLY like a 9mm revolver as I have settled only having the 9mm caliber at this time for center fire hand guns but I just could not stomach that price.

January 17, 2013, 11:59 PM	#13
weblance Senior Member Join Date: October 3, 2012 Posts: 306	DTrain... consider this instead of the SP101 9mm. You can buy one for half of what they are asking for that SP101. Mine is blue, but they are available in stainless also. http://www.thehighroad.org/showthread.php?t=678182

January 18, 2013, 12:15 AM	#14
BigDinFL Senior Member Join Date: December 20, 2012 Location: The "Gunshine State" Posts: 865	You could always buy the regular SP and have one of the better companies make you a 9mm cylinder

January 18, 2013, 12:50 AM	#15
weblance Senior Member Join Date: October 3, 2012 Posts: 306	Id like to convert a 4" GP100 to 9mm

January 18, 2013, 01:25 AM	#16
stormyone Senior Member Join Date: August 30, 2005 Location: midwest Posts: 346	<<<Id like to convert a 4" GP100 to 9mm>>> I'd like a 10mm GP 100.

January 18, 2013, 06:42 PM	#18
stormyone Senior Member Join Date: August 30, 2005 Location: midwest Posts: 346	Thanks for that info WC.

January 19, 2013, 09:56 AM	#19
hAkron Senior Member Join Date: March 31, 2011 Location: Akron, Ohio Posts: 157	I saw one for sale in a gun shop around here (another guy bought it while I was trying to get the salesman's attention). It was under $400 in MINT condition. I would have loved to take that gun home, but it would have just been a novelty. For $900, they better be giving you 3 of them.

January 19, 2013, 08:15 PM	#20
stormyone Senior Member Join Date: August 30, 2005 Location: midwest Posts: 346	That's just an insane price.