The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 17, 2013, 06:51 AM   #1
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,240
38/357 mag cast bullets ?

What weight bullets are you guys reloading for your 38 and 357 mag ? Where do you buy them, what brand ?
rebs is offline  
Old January 17, 2013, 07:08 AM   #2
biganimal
Senior Member
 
Join Date: March 5, 2001
Location: south carolina
Posts: 435
I load 148 gr DEWC, 158gr Swc, 148gr LRN, & 200gr LRN, all cast by me in my garage.
__________________
Other than That, Mrs Lincoln, How was the play?
biganimal is offline  
Old January 17, 2013, 08:21 AM   #3
spacecoast
Senior Member
 
Join Date: October 14, 2009
Location: Sunshine and Keystone States
Posts: 4,133
158 gr. LRN or LSWC is probably the most common/popular for .38 special target loads. You can also use them in .357, but for anything running over 1000 fps I use Berry's plated bullets, and for hot .357 mag loads I use JHP from Rocky Mountain Reloading.

Note - light (125 or 110 gr.) bullets have been known to increase flame cutting (wear of the top strap) of revolvers in .357 mag.
spacecoast is offline  
Old January 17, 2013, 08:47 AM   #4
reloader28
Senior Member
 
Join Date: October 13, 2009
Location: nw wyoming
Posts: 940
I cast all mine.
My favorite is 165gr RF. I like it in 357 and 38.
100grFN and 130grRF both shoot pretty good in my 38's too.
150gr RN use to shoot good in my gun, but I quit using them when I got some bullets with a usable flat nose. Round nose is good for nothing but penitration.
reloader28 is offline  
Old January 17, 2013, 09:36 AM   #5
jmortimer
Junior member
 
Join Date: January 24, 2010
Location: South West Riverside County California
Posts: 2,763
For hunting and Self-defense I think Beartooth is the best. Oregon Trails laser Cast, Rim Rock (Supplies Buffalo Bore), Penn Bullets, Missouri Bullets, Dardas Cast, Matt's Bullets, Carolina Cast, Magnus, Meister and so on and on. They will all work. I like big meplats and some of these listed don't go there and have no LBT style bullets.
jmortimer is offline  
Old January 17, 2013, 12:10 PM   #6
TheBear
Senior Member
 
Join Date: April 11, 2011
Posts: 295
158gr flat nose and 170gr keith style bullets all day long!
TheBear is offline  
Old March 10, 2013, 03:31 PM   #7
perazzi
Junior Member
 
Join Date: January 14, 2010
Location: Hell, Michigan
Posts: 7
target group from today on my Lee Pistol rest. Magnus 148 HBWC.

.38 special PPC gun.

perazzi is offline  
Old March 10, 2013, 04:44 PM   #8
Jbotto
Senior Member
 
Join Date: February 8, 2010
Location: MN
Posts: 358
I use 158gr SWC from Missouri Bullet Co. I have liked them a lot so far!
__________________
"No experience is so conductive for steady and accurate shooting as the knowledge of the impossibility to escape by speed."
-Sir Samuel Baker
Jbotto is offline  
Old March 10, 2013, 05:21 PM   #9
Boomer58cal
Senior Member
 
Join Date: February 18, 2013
Location: closer than you think
Posts: 968
I cast my muzzleloader balls/bullets but for center fire pistols I have found a soft spot for Laser cast Oregon trail silver bullets. You can run them hard, shoot one hole groups and the penetration is nothing short of amazing. Nuff said.

125g or 155g for 38sp

155g or 165g for .357 mag.
__________________
The number one cause of death in the 20th century. 290,000,000 citizens were first disarmed and then murdered by their own governments. This number does not include those killed in war.
We're from the government, we're here to help

Last edited by Boomer58cal; March 10, 2013 at 05:28 PM.
Boomer58cal is offline  
Old March 10, 2013, 05:41 PM   #10
Hammerhead
Senior Member
 
Join Date: May 31, 2004
Location: Minnesota
Posts: 1,569
I use swaged lead 158 grain SWC's & SWC-HP's from Hornady, Speer and Magnus, plus 140 grain swaged LFP's from Hornady.

I shoot some cast 148 DEWC's from Penn as well.

IMO, the swaged 158 LSWC-HP from Magnus is the best all around bullet under 1,000 fps for the .38 and .357.
Hammerhead is offline  
Old March 11, 2013, 07:04 AM   #11
Viper225
Senior Member
 
Join Date: September 20, 2009
Location: SC Missouri
Posts: 500
I have been buying from stock at my local dealer. I think they are Missouri Bullet Company. I can order them cheaper, but it is handy to buy from my local dealer. I also want him to keep stocking bullets, so I do not have to order them.

I load 158 Round Nose for Steel and Defensive Pistol.
For BUG Match ammo I am running 125 Round Nose.

I also cast myself from time to time, when I have time. I have a 6 Cavity Lee 158-R2 Mold. I also have a Lyman 358156, 158 SWC-GC.

It is bad when you are retired, and too busy to cast bullets.

Bob
Viper225 is offline  
Old March 11, 2013, 09:08 AM   #12
Old 454
Senior Member
 
Join Date: August 15, 2011
Location: Chesterton Ind.
Posts: 396
I use 158GR Hard Cast from SNS Casting, there a BN 17 so you can load them a little hotter then a soft lead.
Old 454 is offline  
Old March 11, 2013, 10:44 AM   #13
iraiam
Senior Member
 
Join Date: September 6, 2012
Location: Lakewood, CO
Posts: 873
I cast my own 158 grain cast SWC with a gas check, I shoot them at full power.
__________________
NRA Lifetime Member Since 1999

"I ask, sir, what is the militia? It is the whole people except for a few public officials." George Mason
iraiam is offline  
Old March 11, 2013, 10:50 AM   #14
chiefr
Senior Member
 
Join Date: January 27, 2010
Location: AR
Posts: 1,250
Cast my own too. 148WC & 155-165SWC behind 2.8 -3.0gr Bullseye.
chiefr is offline  
Old March 11, 2013, 11:33 AM   #15
David Bachelder
Senior Member
 
Join Date: August 23, 2011
Location: Trinity, Texas
Posts: 632
I cast my own.
125gr Flat Point
145gr Hollow Point
150gr Semi Wad Cutter
All Alox tumble lubed

I shoot the 125's in the .38 Special (very accurate, they even make me look good).

I shoot the 145gr HP's in a 38S&W, .38 Special and .357mag.

My best and most accurate is thr 150gr SWC in the .357. I shoot them in a Henry Rifle and a Ruger BlackHawk. They are amazing in the Henry.
__________________
David Bachelder
Trinity, Texas
I load, 9mm Luger, 38 and 40 S&W, 38 Special, 357Magnum, 45ACP, 45 Colt, 223, 300 AAC, 243 and 30-06
David Bachelder is offline  
Old March 11, 2013, 11:34 AM   #16
Tennessee Jed
Member
 
Join Date: July 14, 2010
Posts: 84
So far I've been using Rimrock 158 grain LSWC. Been very pleased with them. However, Rimrock's prices just went up, so I'm about to try a batch from Missouri Bullets. I'm right at the point where the prices from vendors are about to convince me to start casting my own.
Tennessee Jed is offline  
Old March 11, 2013, 11:51 AM   #17
rclark
Senior Member
 
Join Date: February 12, 2009
Location: Butte, MT
Posts: 1,660
I use Rimrock too. 158g SWC (15 BHN) mostly although I have used the 125 TC too in the past. Settled on the 158g bullets though for all my peanut shooting needs. I too noticed the price increase. Might have to start looking for a new vendor even though I am very satisfied with the bullets. I also buy .44 and .45 bullets from Rimrock also.

I think I am going to look into gathering equipment to start casting this year too.....
__________________
A clinger. When guns are outlawed, only outlaws will have guns. Single Action .45 Colt (Sometimes improperly referred to by its alias as the .45 'Long' Colt or .45LC). Don't leave home without it. Ok.... the .44Spec is growing on me ... but the .45 Colt is still king.
rclark is offline  
Old March 11, 2013, 11:55 AM   #18
TriumphGuy
Senior Member
 
Join Date: October 5, 2009
Posts: 559
158gr cast SWC from http://mastercast.net/ftp.mastercast...t_Bullets.html.

I buy all of my cast handgun bullets from these folks.
TriumphGuy is offline  
Old March 11, 2013, 12:03 PM   #19
Ranger185
Junior Member
 
Join Date: February 5, 2013
Posts: 5
I am with David I am casting the 125gr flat point and sizing it for my 38 & 9mm. It makes a very accurate round and allows me to cast a lot and use for both. We punched the centers out of a lot of targets yesterday with 4 different pistols 2--38s and 2-9s........
__________________
"I'd rather be FREE than risk-free"
Ranger185 is offline  
Old March 11, 2013, 12:14 PM   #20
Voyager2011
Member
 
Join Date: February 3, 2013
Posts: 21
I load 125gr TCFP and 158gr SWC. I get them from Falcon Bullet Company. www.falconbullets.com
Voyager2011 is offline  
Old March 11, 2013, 12:35 PM   #21
CADILLAC HOOSIER
Member
 
Join Date: August 28, 2010
Location: INDIANA
Posts: 62
I've loaded several thousand 158 gr LSWC from Berry's and been extremely satisfied. Have recently been driven to purchase a few thousand of other brands, but haven't loaded any of them yet. 158 LSWC seem to give best accuracy in my old Blackhawk.
CADILLAC HOOSIER is offline  
Old March 11, 2013, 01:45 PM   #22
Don P
Senior Member
 
Join Date: December 17, 2005
Location: Florida
Posts: 4,807
140 grain Zingers
__________________
NRA Life Member, NRA Range Safety Officer, IDPA Safety Officer, USPSA NROI Range Officer
As you are, I once was, As I am, You will be.
Don P is offline  
Old March 11, 2013, 04:55 PM   #23
schmellba99
Senior Member
 
Join Date: January 8, 2008
Posts: 596
125 and 130 grain RNFP from www.friendswoodbullet.com for my .38's, and 158 JHP's for my .357 (Magtech I think is what I have - don't shoot .357's all that much and bought 250 or so several years ago that I haven't finished shooting yet).
schmellba99 is offline  
Old March 11, 2013, 07:05 PM   #24
kgpcr
Senior Member
 
Join Date: May 23, 2005
Posts: 945
148 DE Wadcutter. Hard cast by myself
__________________
Colt King Cobra .357 Colt Anaconda .44mag
Springfield Armory .45 Double stack Loaded
XD40 service XD45 Taurus 617 .357mag
Smith M&P 40
kgpcr is offline  
Old March 12, 2013, 06:11 AM   #25
CMD-Ky
Member
 
Join Date: November 6, 2011
Posts: 18
Missouri Bullet Company several weights and design.
CMD-Ky is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.11996 seconds with 9 queries