The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 12, 2013, 01:51 PM   #1
triker
Member
 
Join Date: January 15, 2011
Location: SW Iowa
Posts: 31
45 colt primers?

Could only get CCI, 350, magnum primers. How much should I reduce the powder in medium 45 colt loads to account for the magnum primers? Mine is Lipseys 45lc/acp so is medium frame and don't plan to load heavy loads anyway. Am using 255 SWC and Unique powder. thx triker
triker is offline  
Old January 12, 2013, 02:04 PM   #2
Hammerhead
Senior Member
 
Join Date: May 31, 2004
Location: Minnesota
Posts: 1,496
I would go back to the recommended minimum charge and work up from there.
CCI 350's are very hot. Recently there was a test in Handloader magazine where the CCI 350 raised pressure in the 45 Colt over 13,000 psi compared to a Win LP primer.
Hammerhead is offline  
Old January 12, 2013, 02:05 PM   #3
rclark
Senior Member
 
Join Date: February 12, 2009
Location: Butte, MT
Posts: 1,559
Unique is not primer sensitive. Either WLP, CCI-300, CCI-350 will work just fine.

Test results:

8.5g Unique, 255g SWC, CCI-300, 977fps, 17 SD, 56 ES, 15 shots
8.5g Unique, 255g SWC, CCI-350, 985fps, 21 SD, 82 ES, 15 shots

I did these tests on a few powders because I ran into the same problem you did the last time around we have primer supply problems .
__________________
A clinger. When guns are outlawed, only outlaws will have guns. Single Action .45 Colt (Sometimes improperly referred to by its alias as the .45 'Long' Colt or .45LC). Don't leave home without it. Ok.... the .44Spec is growing on me ... but the .45 Colt is still king.
rclark is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06288 seconds with 9 queries