The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old December 18, 2012, 09:09 AM   #1
tchunter
Senior Member
 
Join Date: October 17, 2010
Location: Decatur, MI
Posts: 113
Remington model 11

Hey guys, I have a model 11 that I love to shoot. The previous owner took very good care of it so no rust at all. My question is that I have been thinking of re-blueing the gun and re-finishing the stock. I just want it to look good. The gun just has normal wear on the metal and wood. Is it worth it to go through this just for looks?
tchunter is offline  
Old December 18, 2012, 05:42 PM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,406
Whether or not it is worth it is your call. I will tell you that a worn gun looks lots better than a poorly refinished one.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old December 20, 2012, 08:36 AM   #3
Saltydog235
Senior Member
 
Join Date: October 20, 2010
Location: Pawleys Island
Posts: 1,090
Beauty is in the eye of the beholder. To me covering up the patina of that old humpback is to try and hide the stories it has to tell.
Saltydog235 is offline  
Old December 20, 2012, 12:50 PM   #4
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,594
A lot also depends on whom you send the gun to for refinishing.

At Lassen College we were taught to polish our guns on the buffer wheel. That of course could remove marks (which we avoided by applying less pressure). At Trinidad State everything is polished by hand. I saw an engraved shotgun that the instructor was polishing (we worked our on project and when we didn't bug him with questions, he worked on his own project). Anyway, the engraved shotgun was reblued and you couldn't tell that any of the engraving was removed. He's that good. My point is to be careful who you take it too.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old December 21, 2012, 03:04 PM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,127
At a shop where I once worked, the job of polishing was given to a guy who had some good skills, but unfortunately none was in polishing. To say he was ham handed would be to insult ham.

Someone once told him, "Lean a little harder on the wheel, Joe, that gun still has some markings on it!" Having no understanding of sarcasm, he did just that.

Believe it or not, most of the customers liked the shiny finish and didn't seem to care that "all that dumb scratchin" was gone.

Jim
__________________
Jim K
James K is offline  
Old December 22, 2012, 10:52 PM   #6
wyop
Senior Member
 
Join Date: July 15, 2012
Location: Wonderful, Windy Wyoming
Posts: 133
For the stock, you could give it a little sprucing up with some Johnson's paste wax on 0000 steel wool. You're not looking to bear down on the steel wool, just give the stock a light buff-down and remove haze and surface gunk.

As for the steel, if the blueing is in good shape, then all you need to do is wipe it down with a light coat of oil. An old gun in good shape that doesn't have damage or rust is entitled to have a patina of age.

Refinishing: Worst possible of all worlds is someone buffs out the metal on a wheel. Corners get rounded, details are lost, lettering is washed out. Real refinishing means real work, polishing by hand with polishing paper backed with a hard object. I have a bunch of aluminum and walnut blocks I used for backing paper into tight spaces and corners and use a bunch of different types of papers to get the finish right. I'll polish up to 400 to get rid of 320-level marks, then I might back down to some used 320 paper after the 400. Polishing that preserves details and is hard to detect takes time and some skill.
wyop is offline  
Old January 8, 2013, 03:05 PM   #7
2001FLHr
Junior Member
 
Join Date: August 28, 2012
Location: Texas
Posts: 4
Rem. Model 11 care.

I would replace the action spring with a Wolff. Clean the stocks with a rag that is damp with carb cleaner. Then hand rub in two or so coats of Lin Speed. Leave the metal alone. If you love to shoot then install a two piece carrier for the Browning A5 with a new spring and you don't have to use the carrier release button for every shell. It will load exactly like a late model A5. AND, you will not have to alter the original in any way. Make sure the barrel is in the receiver correctly and make sure the recoil buffer is good. These buffers can still be bought new and installed very easy. You can crack the bolt if things are not set up carefully.
2001FLHr is offline  
Old January 10, 2013, 11:59 AM   #8
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,127
I agree that hand polishing works and gives excellent results. But no professional gunsmith could afford to spend hours or days hand polishing an action; few customers would pay the price. Common sense and economics dictate use of a wheel.

But the fact is that a wheel (or several wheels) can give a top quality finish and without removing or dishing markings or dishing holes. It just takes some experience and skill.

Jim
__________________
Jim K
James K is offline  
Old January 10, 2013, 03:38 PM   #9
603Country
Senior Member
 
Join Date: January 6, 2011
Location: Thornton, Texas
Posts: 2,203
Back in the 80's I bought a Model 11 at a pawn shop in Houston. I took it to Briley mfg on Gessner and had the 30 inch full choke barrel cut down to 27 inches and a Briley choke installed. Man, that old shotgun was and is a real shooter. After I'd had it for maybe 10 years, and hunted with my buddies that had expensive shiny new shotguns, I thought that getting it all polished up would be a good thing. It turned out real nice, and it does look much better than it once did. And they polished it with a wheel and they took off a little more metal in one spot than I wanted, but I guess I'm the only one that ever noticed it.
603Country is offline  
Old January 10, 2013, 04:44 PM   #10
TheNatureBoy
Senior Member
 
Join Date: September 6, 2007
Posts: 1,176
I also own a Model 11/12 gauge. It belonged to a gentleman that hunted locally with it for years and from what I was told had a lot of success with it. When ever the guys that knew him (he is deceased) see the gun, they immediately call out his name and talk about the number of dear he killed with it. For that reason I won't refinish it. I'd feel like I was wiping away years of history.
TheNatureBoy is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:59 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08684 seconds with 9 queries