Looking for review of Sig 556R in 7.62x39

[Skans]

I am intrigued by the SIG 556 R in 7.62x39. I like the round better than 5.56 and I like the "look and feel" of the Sig 556. How do they function? How do they hold up? I am not looking for an AR-15 or another AK. I was wondering if anyone who has one of these, or has fired one (or even the 5.56 version) could provide me with information I can't get from the manufacturer.

[slim9300]

Subscribed.

I'm guessing it takes a unique magazine?


Sent from my iPhone using Tapatalk

[Wisewolfhowling]

Check out warriortalk.com. And search the sig556R. Gabe has a few reviews for you to look at.

[Skans]

From what I understand, the 556R uses standard AK magazines.

[slim9300]

Originally Posted by Skans

From what I understand, the 556R uses standard AK magazines.

Wow. That's really what I have been looking for now that RRA is almost certainly dumping the LAR-47 build. I had no idea Sig made such a weapon. Now the insanely difficult challenge of finding one before the SHTF...


Sent from my iPhone using Tapatalk

[halfcocked]

Early ones had reports of reliability problems and the steel AK mags were tearing up the aluminum receivers. I have "heard" the newer ones have been corrected. You may want to research more before you buy. I have a 556 in .223 and am happy with it.

[tulsamal]

Check out warriortalk.com. And search the sig556R. Gabe has a few reviews for you to look at.

That's what I was going to suggest as well. He's become a big fan and written about it extensively.

http://www.warriortalknews.com/2012/...auer-556r.html

Gregg

[slim9300]

Originally Posted by halfcocked

Early ones had reports of reliability problems and the steel AK mags were tearing up the aluminum receivers. I have "heard" the newer ones have been corrected. You may want to research more before you buy. I have a 556 in .223 and am happy with it.

I will be using polymer mags but thanks for the heads up! I will be doing some research. I don't need anymore 5.56 ARs.


Sent from my iPhone using Tapatalk

[seanc]

http://thefiringline.com/forums/show...highlight=556r

http://www.youtube.com/watch?v=nrObcZb_CCI

[slim9300]

I just spent an hour reading about the two similar options out there... Both the XCR in 7.62 and the 556R have way to many bad reviews if you ask me. I think there is a reason Robinson isn't listing the 762 anymore on their website.

The 556R will not shoot Wolf ammo nor will it accept a steel mag without doing obvious damage to the weapon over a short period. I did read the one review from Warrior Talk that stated it would shoot anything in terms of ammo, but I have read many noting failures. Plus, Sig says they will void your warranty to shoot steel casing. I think I will stick with my ARs for now. I really wanted a fighting rifle in 7.62x39 that would run steel casings if necessary, but that doesn't appear to be a possibility at this time.


Sent from my iPhone using Tapatalk

[tulsamal]

The 556R will not shoot Wolf ammo nor will it accept a steel mag without doing obvious damage to the weapon over a short period. I did read the one review from Warrior Talk that stated it would shoot anything in terms of ammo, but I have read many noting failures. Plus, Sig says they will void your warranty to shoot steel casing.

That's the "gen one" rifles. The new ones have a steel insert to protect the receiver from wear by the magazines. And SIG says you can shoot any 7.62x39 in the new one.

I know, if you do a google search you find lots of critical reviews and lots of problems. But look at dates. I don't actually own one so I'm just telling you what I've observed online. The newer ones are worth owning. I would take one anytime. Maybe I'll get the chance someday if the chaos ever goes away!

Gregg

[slim9300]

Originally Posted by tulsamal

That's the "gen one" rifles. The new ones have a steel insert to protect the receiver from wear by the magazines. And SIG says you can shoot any 7.62x39 in the new one.

I know, if you do a google search you find lots of critical reviews and lots of problems. But look at dates. I don't actually own one so I'm just telling you what I've observed online. The newer ones are worth owning. I would take one anytime. Maybe I'll get the chance someday if the chaos ever goes away!

Gregg

Good to know.


Sent from my iPhone using Tapatalk

[Skans]

tulsamal - thanks for providing that information. Boy, am I glad I asked about this! Some really good information here.

[slim9300]

Originally Posted by Skans

tulsamal - thanks for providing that information. Boy, am I glad I asked about this! Some really good information here.

Imagine buying a used 1st generation without knowing. That would be upsetting.


Sent from my iPhone using Tapatalk

[stubbicatt]

Slim, my understanding is that SIG will update your rifle to Gen 2 at no cost.

If you are in doubt, look into the forward part of the magazine well where the front of the magazine would go. Do you see a steel "horseshoe" shaped insert in there? Then you are good to go.

[plouffedaddy]

I've shot two 556Rs---both were properly maintained (my buddy and his dad have them and take care of their guns) and both were unreliable and had various issues. I would stay far, far away from them; especially when there are so many quality AKs that are proven and priced similarly or less (maybe not these days ).

[AJD21]

I have heard nothing good about this rifle but have no first hand experience.

[slim9300]

Originally Posted by plouffedaddy

I've shot two 556Rs---both were properly maintained (my buddy and his dad have them and take care of their guns) and both were unreliable and had various issues. I would stay far, far away from them; especially when there are so many quality AKs that are proven and priced similarly or less (maybe not these days ).

Did they have the generation 2 "updates"? How long ago did you shoot them?


Sent from my iPhone using Tapatalk

[en-frame]

Slim9300,

I've got one, a 2nd generation. I've put about 350 rounds through mine, and I really like it. No problems at all with the carbine itself, though I had some minor feeding issues with a Tapco magazine. I've used steel AK mags in it (Hungarian 20 round). Worked fine.

I hope you can find one for a reasonable price.

[slim9300]

Originally Posted by en-frame

Slim9300,

I've got one, a 2nd generation. I've put about 350 rounds through mine, and I really like it. No problems at all with the carbine itself, though I had some minor feeding issues with a Tapco magazine. I've used steel AK mags in it (Hungarian 20 round). Worked fine.

I hope you can find one for a reasonable price.

Thank you! I can only hope.


Sent from my iPhone using Tapatalk

[plouffedaddy]

Did they have the generation 2 "updates"? How long ago did you shoot them?

Honestly I don't know. I know both have been back to SIG at least 1x each and still have problems.

Shot within the last 6-8 months.

[en-frame]

slim9300,

Here's a couple of reviews off of ARF.com

http://www.ar15.com/forums/t_6_45/37..._run_____.html

http://www.ar15.com/forums/t_6_45/38...ge_report.html

FWIW. Good luck with your search and research.

en-frame

[slim9300]

Originally Posted by en-frame

slim9300,

Here's a couple of reviews off of ARF.com

http://www.ar15.com/forums/t_6_45/37..._run_____.html

http://www.ar15.com/forums/t_6_45/38...ge_report.html

FWIW. Good luck with your search and research.

en-frame

Thank you. This is making me feel better about the weapon. I feel confident it would be a good thing to have.


Sent from my iPhone using Tapatalk