![]() |
|
|
#26 |
|
Senior Member
Join Date: February 3, 2007
Location: NE Ohio
Posts: 255
|
Standard configuration has no pistol grip so it should escape a ban if like the previous ban. As far as pricing.....I bought one just the other day for $650 locally off Craigslist. Still have enough to buy my Service Grade M1 from CMP store now!
I posted a WANTED "mini 14 or Mini 30" on Craigslist and a guy contacted me immediately with the offer for two SS underfolders...wanted over $1300 each. Then another guy an hour later emailed me with offer for like new Ranch Rifle . It is a like new rifle 195 Series from 1996 and it is like new! Said he bought for Ground hog hunting and never used it. Said only fired a few rounds through it and it looks like it. Only bad part of it is that it only came with one 5 rd mag. I ordered two NEW Ruger Factory 20 rders from Copes for $40 each and should be here by the weekend. I shot it the other day when I was sighting in my muzzleloader and it was decent. This is the older style with thin straight barrel, but at 50 yds offhand I had 2" groups with cheap UMC. I'm happy enough, got it for pretty much going rate before the frenzy! Check Armslist out....plenty of good deals out there. The newer 580+ series do have better accuracy reports, but some of the older ones do ok too. I'm sure if I used some good handloads and used my leadsled I could get it to around 2" or less at 100 yds. Much more reliable platform than any AR15! Last edited by buymore; January 4, 2013 at 04:39 PM. |
|
|
|
|
#27 |
|
Senior Member
Join Date: March 15, 2010
Location: Mesquite Jungle Desert, West Texas, USA
Posts: 2,280
|
Funny thing about those 5rd mags. I use it most of the time now. The 30rd mags just get in the way when hunting. Would like to find a 10 and try it.
__________________
Navin R. Johnson: "He hates these cans!!!! Stay away from the cans!!!!" |
|
|
|
|
#28 |
|
Senior Member
Join Date: January 22, 2009
Location: Texas
Posts: 555
|
RickyRick I agree. I went to my buddies land and took my mini with a 20 round mag and that thing stabbed me in the back all day long. A 5 rounder or even a 10 round mag would have been a better choice. I really need a couple of 10 round mags.
You can modify a 5 round mag to hold an extra round so that with one in the pipe and 6 in the mag you have 7 rounds on board. Just so you know.
__________________
Some people think an English Bulldog looks great... many more people can't tell one end from the other, even by smell. A village in Kenya called. They want their idiot back. |
|
|
|
|
#29 |
|
Senior Member
Join Date: February 3, 2007
Location: NE Ohio
Posts: 255
|
how did you modify it? Maybe try that myself.
|
|
|
|
|
#30 |
|
Senior Member
Join Date: February 18, 2008
Posts: 1,576
|
"Perfectunion.com", for numerous forums on the Mini 14, 30 and 6.8 versions.
They also have a forum for magazine topics. |
|
|
|
|
#31 | |
|
Senior Member
Join Date: January 22, 2009
Location: Texas
Posts: 555
|
Quote:
__________________
Some people think an English Bulldog looks great... many more people can't tell one end from the other, even by smell. A village in Kenya called. They want their idiot back. |
|
|
|
|
|
#32 |
|
Senior Member
Join Date: May 12, 2011
Location: New Mexico
Posts: 893
|
I really like the flush fit five round mags. I can tote my mini just like a 10-22.
It actually pretty much looks like one as well because of the non flash hider muzzle. IF IT GETS WEIRD, this might be a factor. Imagine having to weld in the magazine and feed it with stripper clips! |
|
|
|
|
#33 |
|
Senior Member
Join Date: April 26, 2001
Posts: 557
|
Any options for sights? I've got an older one (circa 1995) and I really hate the pin-prick hole in the rear sight. I understand precision with a smaller peep but this is definitely not a precision rifle. I'd like something that allows a quicker sight picture.
|
|
|
|
|
#34 |
|
Senior Member
Join Date: May 12, 2011
Location: New Mexico
Posts: 893
|
You might have to change the rear sight assembly out for a new one. Supposedly the rear sight on the new ones has been improved, but I don't know when the change went in.
|
|
|
|
|
#35 |
|
Member
Join Date: February 17, 2011
Posts: 31
|
reliable and accurate
I have a very nice AR15 and I prefer my Mini14. You will read a lot of bad stuff online but the mini was redesigned a few years back and im here to tell you the accuracy issues have been eliminated. Buy a new mini and you will not be disapointed.
|
|
|
|
|
#36 |
|
Junior Member
Join Date: January 11, 2010
Location: So. Cal. Mountains
Posts: 2
|
I love my Minim14 Ranch Rifle. One should be a part of everyone's collection, IMHO....
But I've got too many guns, guitars and gadgets according to my wife, so anything I say is probably wrong. |
|
|
|
|
#37 |
|
Senior Member
Join Date: March 15, 2010
Location: Mesquite Jungle Desert, West Texas, USA
Posts: 2,280
|
Ok here's a 5rd group I shot after adding the muzzle brake. It was only a "walked off" 100yds so you can +/- a few yards.
55gr hornaday vmax. Good enough for my purposes.
__________________
Navin R. Johnson: "He hates these cans!!!! Stay away from the cans!!!!" |
|
|
|
|
#38 |
|
Senior Member
Join Date: August 22, 2008
Location: Back in Wyoming
Posts: 1,116
|
The pic above tends to disagree with my admittedly limited experience. I haven't found them to be very accurate. Then again, I've never shot a redesigned Mini. If I didn't already own a very accurate AR I spose I might consider a newer one.
__________________
Insanity: doing the same thing over and over again and expecting different results |
|
|
|
|
#39 |
|
Senior Member
Join Date: March 15, 2010
Location: Mesquite Jungle Desert, West Texas, USA
Posts: 2,280
|
It's a newer one, 2009 581 with premium ammo. I'll give you the fact that its not that tight with plinking ammo. First round on a coyote always makes its mark. That's also one year with only a bore snake ran thru it occaisionaly.
I had to take the rifle apart to install a muzzle brake, then of course re zero. It was shot prone supported with a range bag and rolled up jacket for extra support. The rifle was fairly warm.
__________________
Navin R. Johnson: "He hates these cans!!!! Stay away from the cans!!!!" Last edited by rickyrick; January 7, 2013 at 09:21 AM. |
|
|
|
|
#40 |
|
Senior Member
Join Date: November 20, 2008
Posts: 6,362
|
Mini-14's are good solid .223 rifles. The stainless Mini-14 used to be pretty standard for a boat gun (lots of people keep them on their yachts and sail boats around where I live). They are not (in my opinion) worth more than $700, and I consider that price high. Saw them with $1,000 price tags on them at a gun show this weekend.
|
|
|
|
|
#41 |
|
Staff Lead
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 21,046
|
MK11, drill out the hole in the rear sight if it's too small. Do it in small steps, until you're satisfied.
__________________
You're from BATFE? Come right in! I use all your fine products! |
|
|
|
|
#42 |
|
Senior Member
Join Date: August 9, 2011
Posts: 437
|
[IMG]
[/IMG]I own almost a dozen AR's but I have a special fondness for my Tactical model. |
|
|
![]() |
| Thread Tools | |
|
|