The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 3, 2013, 01:09 PM   #1
nuru
Junior Member
 
Join Date: January 2, 2013
Posts: 1
powder funnel sticking on press

I am fairly new to reloading, I have acquired a nice RCBS progressive press. It seems to work great except for the metal powder funnel seems to stick in the clear plastic tube that it is supposed to slide up and down in. This results in it not coming back down to make contact with the brass as the powder is dumped and it spills everywhere. Is there anything I can do to make this slide easier (some type of a lube that wont mess up the powder?). It may also be worth noting that the plastic tube has a crack in it, the crack was caused by the previous owner tightening the powder dispenser set screw too tightly. The crack appears to be cosmetic only because you cant feel it from either side.
nuru is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06698 seconds with 9 queries