The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 10, 2001, 10:22 AM   #1
wolf 1415
Senior Member
 
Join Date: January 22, 2000
Posts: 170
Can .38 and .38 +p load recipes be used in .357 cases verbatim?

The case is not much longer, and I would suspect that seating the bullet a little (.10) deeper would create the exact same case dimension, if the exact same case dimension is required.

This all makes sense to me but TFL'ers have saved me more than once. This seems like an FAQ, but I couldn't find it in a search. Thanks in advance.
wolf 1415 is offline  
Old April 10, 2001, 11:50 AM   #2
Poodleshooter
Senior Member
 
Join Date: August 7, 2000
Location: Floating down the James River in VA
Posts: 2,539
Yes, most .38 loads have a pressure equivalent in .357 data, usually about .1-.2 grain more or so with the fast burning powders such as Bullseye or Clays. I only load in .357 cases to avoid chamber leading in my GP100, but frequently download to .38 SPCL velocities.
Poodleshooter is offline  
Old April 10, 2001, 08:25 PM   #3
dick w. holliday
Senior Member
 
Join Date: January 13, 2001
Location: NC
Posts: 589
i've never tried to compare but supposedly using the longer brass is more accurate because the bullet doesn't have to go as far before contacting the rifling....Dick
dick w. holliday is offline  
Old April 11, 2001, 01:21 AM   #4
AlbertaCanada
Member
 
Join Date: November 2, 2000
Posts: 73
I have used .357 cases loaded to .38Spl specs(+.1gr.). I shoot 148gr LSWC with varied results. I think that if i used a powder that occupied more space in the case, I would get better accuracy.- Not that it is really bad with the .357 cases. It's just that I thought it would be better because the bullet would be starting out closer to the cone of the cylinder.
Any thoughts, guys?
AlbertaCanada is offline  
Old April 11, 2001, 01:52 AM   #5
Hal
Senior Member
 
Join Date: October 9, 1998
Location: Ohio USA
Posts: 7,435
Yes. Most of the time.
Unique works very well for this as does Win231. Check the Cowboy loading data for the .357mag. Usually it's pretty close to exactly what the regular loads for the .38Special are, except the case used is the .357mag.
Hal is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06702 seconds with 9 queries