The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools
Old December 16, 2012, 05:40 PM   #1
gdcpony
Member
 
Join Date: March 2, 2010
Posts: 17
Building a DPMS in .257Ack?

A while ago I was looking at a forlorn 98 action and adding up the price to turn it into the heavy barreled varmint rifle I dream of. Boy, did it add up! I figure I will have over $1200 in it by the time I am done.

So I look over at my current project- another Mauser- in my favorite caliber of .257Roberts. I plan to re-barrel it to the Ackley version upon wearing the current tube out. Beside it sat my trusty AR15 which as a Marine I love dearly. I love both actions (Mauser and AR) and calibers (.223 and .257)! I have both a bolt and semi .223, if only I could get the same in .257.

Then it struck me: Why spend so much to pretty much duplicate a rifle I already have? Why not look into an AR in .257? I swear there were angels singing! (ok not really, but you get it). So I began researching the possibility of an AR build in .257Roberts.

In light of last week's tragic events, I decided that I might want to get the receiver sooner rather than later. So I picked up a base model DPMS LR-308 rifle. This way I can shoot it while saving and scrounging the parts I need. That list is surprisingly short. I simply need the barrel, a proper handguard, and a few little parts.

Most people and even a few gun makers (particularly those I would have to deal with) don't even know what the .257Roberts is. So the barrel will be hard to source. This is especially true since I would want it to start out in the Ackley version. Any ideas there? I would like the barrel to be a 24" heavy.

It will probably be years before I can complete this rifle, but at least I have a good start.

Last edited by gdcpony; December 16, 2012 at 06:11 PM.
gdcpony is offline  
Old December 16, 2012, 11:39 PM   #2
jackpine
Senior Member
 
Join Date: November 24, 2010
Posts: 350
I don't think it will work as your talking a 57mm case and not a 51mm. If you could get it to work you would have to fab a new magazine because the feed angles on a 7.62X51 mag would be all wrong for a 7 mauser based cartridge. You would be better off making a 25/08 or selling your 308 parts and picking up a 257 WSSM AR-15 upper as the work has been done for you already
jackpine is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05221 seconds with 9 queries