The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old December 3, 2012, 10:00 PM   #1
cobywallice
Junior Member
 
Join Date: December 2, 2012
Posts: 5
first gun refinish

i have done some research and have found that brownell have some really nice spray on finishes for a feg hp clone that i purchased as a project gun. the finish requires some oven time to preheat and to cure after spraying.

my question is can i use my kitchen oven for this?

thanks for your help and replies
cobywallice is offline  
Old December 3, 2012, 10:19 PM   #2
logeorge
Junior Member
 
Join Date: December 24, 2007
Location: Ardmore, AL
Posts: 13
Bake on finish

I used the kitchen oven to bake on Brownell's Gun-Kote. It worked just fine, but it's best to do it while the wife is away and you have time to air out the house. Redneck women seem to get a little testy when you stink up their kitchen!! I didn't think it was that bad. Her opinioin was different!! L. O. G.
logeorge is offline  
Old December 4, 2012, 11:42 AM   #3
cobywallice
Junior Member
 
Join Date: December 2, 2012
Posts: 5
that is one of the finishes i was looking at. how did it turn out and how long did the finish last
cobywallice is offline  
Old December 5, 2012, 02:35 AM   #4
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,449
Brownells sells baking lacquer as well as GunKote spray on/bake finishes. I like GunKote, but if the gun is going to be used hard the Baking Lacquer is tough to beat. I had to remove some from a gun once, and it took abrasive blasting to get it off.

And yes, the kitchen oven will work (if the wife's away).
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old December 15, 2012, 10:30 PM   #5
publius
Senior Member
 
Join Date: January 25, 2005
Location: Mississippi/Texas
Posts: 2,450
Are you married?
__________________
"Suppose you were an idiot, and suppose you were a member of Congress, but I repeat myself." Mark Twain
publius is offline  
Old December 16, 2012, 07:02 AM   #6
cobywallice
Junior Member
 
Join Date: December 2, 2012
Posts: 5
Yes
cobywallice is offline  
Old December 16, 2012, 08:56 AM   #7
Mac's!
Senior Member
 
Join Date: August 15, 2001
Posts: 129
Yes, you can use the kitchen oven as long as your significant other is gone for the day and you use lots of ventilation during/after and you clean the oven afterwards. Those types of finishes not only produce some nasty fumes while curing, they will also do a thing called "Solids Transfer". The curing vapors will deposit solid material onto the surfaces of the oven. The next time the oven is used, some of those solids can transfer back onto the next thing being "cured"...like the pizza.

The oven in my shop that I use for curing finishes is huge. It's a recirculating type. It has blowers that keep air moving around inside of it while curing. Some "old" air is pushed out while new air is being pulled in. I still have to wipe down the inner surfaces once in a while to prevent build-up. It gets thick. Yeah, there's a LOT of parts cured in that oven but any at all on the family dinner is to much.

Use lot's of ventilation while curing and afterwards. The fumes are pretty bad. Last but not least: Watch for the cops! Everybody knows that meth-labs give off nasty odors. heh heh. Firearms finishes smell pretty strong while curing. You may not notice it but a (..Wait for it...!..) nosy neighbor may think you're cooking something illegal. Keep yer powder dry, Mac.
Tuff-Gun Finishes. The Name Says It All.
Mac's Shootin' Irons
http://www.shootiniron.com
Mac's! is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07011 seconds with 9 queries