The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Thread Tools Search this Thread
Old December 8, 2012, 01:11 AM   #1
Junior Member
Join Date: December 8, 2012
Posts: 3
Weapon sights don't align

I have an AR with a XPS 2 on top rail and laser on side rail. The laser drifts off of alignment in relation to the HWS image based on distance to target. What would cause this? Cheap laser???
dblack is offline  
Old December 8, 2012, 01:41 AM   #2
Senior Member
Join Date: December 11, 2002
Location: ALABAMA
Posts: 1,472
Each accessory is "zero'd" at a particular distance, and each accessory is mounted at a different distance from the bore (aka mechanical off-set). The two will very rarely coincide with one another.

I would likely ditch the laser if I were you.
shooter_john is offline  
Old December 12, 2012, 11:59 PM   #3
Junior Member
Join Date: December 8, 2012
Posts: 3
I believe you're right. I'm in the laser pretty cheap. I'll try it in the field at around 50 m and then make my decision. Thanks for the feedback.
dblack is offline  
Old December 13, 2012, 02:34 AM   #4
Senior Member
Join Date: May 25, 1999
Location: Too close to Houston
Posts: 4,143
Measure the distance from the laser to the bore. Adjust it so that it is that same distance to the side of POI at your target. If it is parallel to the bore (looking vertically) you won't have the left-right drift as distance changes.
Proud member of the NRA and Texas State Rifle Association. Registered and active voter.
Sport45 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:13 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04800 seconds with 9 queries