The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old December 9, 2012, 09:07 AM   #1
radioflyer
Senior Member
 
Join Date: August 20, 2009
Posts: 186
Earplugs question

For those that have been to gun shows, you may have seen a booth where you can get custom-made earplugs specific for your ear. The guy has a syringe full of a thick liquid like material that is injected into the ear and hardens. This supposedly will block out noise better and more comfortably than other in-ear style heading protection

I'm curious if anyone here has tried this and how well it works compared to standard expanding earbuds.

thank you
radioflyer is offline  
Old December 9, 2012, 09:46 AM   #2
mitchntx
Senior Member
 
Join Date: June 19, 2011
Location: Texas
Posts: 358
I have a couple sets.

For me, the foam plugs were coarse enough that they irritated my ear canal after about an hour of use. Some versions are more "foamy" than others, but they still would become uncomfortable after a while.

The "custom" plugs are much more comfortable. There is a technique needed to get them in and out and requires a little spit to lube them as you "screw" them in.

And I think they work better ...
mitchntx is offline  
Old December 9, 2012, 11:26 AM   #3
Jo6pak
Senior Member
 
Join Date: August 5, 2010
Location: West Coast...of WI
Posts: 1,506
The custom molded earplugs are more comfprtable and do block a bit more noise. (i think they rate around 32-34db)

I've had a few sets made, mainly for motorcycling. I really liked them while they lasted, but after paying the extra cost and losing them after a bit; I just went back to the yellow foam cheapies.

If you are a little more diligent than me, and can keep from losing them, they work great
__________________
NRA Life Member, SAF contributor.
Jo6pak is offline  
Old December 9, 2012, 12:03 PM   #4
ltc444
Senior Member
 
Join Date: March 3, 2011
Location: Vernon AZ
Posts: 1,195
Couple of questions you need to ask the vendor.

What is the NRR?

Who certified the product and the name of the certifying organization?

(note) if he says OSHA approved or NIOSH he does not know what he is doing. Neither OSHA or the National Institute of Occupational Safety and Health (NIOSH) actually approve a product.

Does he provide a certificate?



If he cannot provide the information I would pass.

Should you be unable to utilize the foam plugs for some reason, I would consult an audiologist. They can evaluate your ears and provide you with a professional assessment.

Prior to the invention of the foam plugs, I used the molded plugs for my high hazard employs. They lasted about 2 months and were expensive.
ltc444 is offline  
Old December 9, 2012, 02:26 PM   #5
radioflyer
Senior Member
 
Join Date: August 20, 2009
Posts: 186
I used foam plugs with great success for a while. I had a set of tan-colored plugs that were slow expanding and very dense. As a result they did an excellent job even next to high powered rifles.

I've tried some other brands, but can't seem to find that original ones I had from years ago. The modern plugs I have are lighter weight, faster to expand and don't block as much noise.
radioflyer is offline  
Old December 10, 2012, 09:15 AM   #6
pturner67
Senior Member
 
Join Date: February 26, 2006
Location: Fairfax, VA
Posts: 668
radioflyer:

if the company is earinc (or a dealer/provider of earinc), they are great...I have a set of the insta-mold earplugs...just make sure you ask them to not trim down the length too much...the noise reduction is around 33 from what I remember...I've had the same set for almost 2 years now and they still work flawlessly

http://www.earinc.com/p1-nonelectron...tamold-rec.php
pturner67 is offline  
Old December 10, 2012, 09:30 AM   #7
wayfarer
Junior Member
 
Join Date: January 3, 2012
Posts: 4
a good foam ear plug is "MAX" by Howard Leight with an NRR of 33, highest i've seen so far.

http://www.howardleight.com/earplugs/max

cheers...
wayfarer is offline  
Old December 10, 2012, 09:34 AM   #8
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
I use silicone foam plugs extensively. I keep a pair in my pocket at all times. I use them in my shop, when shooting and at night because my wife snores like a locomotive. They work just fine. Just make sure you use the silicone foam type. The spongy foam ones just do not do the job.
The silicone type must be rolled small and inserted into the ear canal, not just propped up on the outside.
I also occasionally use the kind with baffles that are on a string. I think these actually are better sound stoppers but not as comfortable. However, easier to insert. On the range I cannot hear range officer commands when wearing these.
Rifleman1776 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09826 seconds with 9 queries