The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools
Old December 7, 2012, 08:40 PM   #1
AgentCircus
Junior Member
 
Join Date: December 7, 2012
Posts: 4
First Steps: Just purchased an M9A1

Hello all. I just purchased my first gun (Beretta M9A1), and will be picking it up next Saturday. Hopefully you guys can answer some questions:

1. CLEANING/MAINTENANCE.
What type of cleaning kit/supplies should I get? I've been looking at the Hoppe's basic cleaning kit that includes solvent, lubricant, and a wire brush. I also read about their bore snake, which looks like a simple cleaning solution. Should I just get this instead?

2. CHECKING EVERYTHING OUT BEFORE I TAKE DELIVERY.
The salesman at the gun store said that when I pick up the weapon, I need to check and make sure everything is good to go. Their policy is that once the pistol leaves the store, any issues have to be dealt with by Beretta. What am I looking for here? Do I just do a function check? They were completely sold out, so I am buying the display model - it's still new, but I don't know if there are some things to be wary of. I'm fairly new to this.

3. GENERAL NEW GUN OWNER STUFF.
Is there anything else, as a new gun owner, I should do or be aware of? Already started looking for a range bag, eye pro, and hearing pro. Any other essentials I need, whether it's in the form of must-have accessories or even a class suggestion would be appreciated. Thanks!
AgentCircus is offline  
Old December 8, 2012, 01:01 AM   #2
BarryLee
Senior Member
 
Join Date: July 29, 2010
Location: The ATL (OTP)
Posts: 2,713
Cleaning: Yes, a basic kit is a great place to start. Most people end up with their own preferred cleaning procedure, but just start off following the manufacturer's instructions and go from there.

Check: Without firing the gun all you can really do is look for any obvious signs of damage or wear. Make sure all the hardware on the gun seems tight and don’t forget to be sure you get the box, magazines, manuals, warranty card etc.'

General: Consider where and how you will store the gun when it is not on your person. What issues might you have to consider for instance children, elderly, curious guest or thieves. A training class is great especially if you have limited or no real experience. Then simply buy a bunch of practice ammo like Winchester White Box and shoot the heck out of the thing.
__________________
A major source of objection to a free economy is precisely that it ... gives people what they want instead of what a particular group thinks they ought to want. Underlying most arguments against the free market is a lack of belief in freedom itself.
- Milton Friedman
BarryLee is online now  
Old December 8, 2012, 06:29 AM   #3
AndyWest
Senior Member
 
Join Date: October 14, 2011
Posts: 621
Excellent choice on a first gun, you'll love it. Adding my (mostly redundant) thoughts to Barry's:

Cleaning: The Hoppe's kit you describe sounds perfect. Hoppe's is a respected brand. Don't bother with a bore snake or other fancy crap for now. And follow the manual.

Check: I have nothing to add to what Barry said.

General: You'll definitely want to buy your own eye and ear protection. I wear glasses so I can't advise on eyes. Ear protection is very cheap and very important, pick up a basic pair at your local sporting goods store for maybe $20 in the hunting section.
AndyWest is offline  
Old December 8, 2012, 06:10 PM   #4
AgentCircus
Junior Member
 
Join Date: December 7, 2012
Posts: 4
Thanks for the replies. As far as the inspection: I heard dry-firing a Beretta is bad, but wouldn't I want to do a function check before leaving the store?
AgentCircus is offline  
Old December 8, 2012, 07:28 PM   #5
TailGator
Senior Member
 
Join Date: May 8, 2009
Location: Florida
Posts: 1,977
Quote:
I heard dry-firing a Beretta is bad, but wouldn't I want to do a function check before leaving the store?
The 92/M9 is a pretty rugged beast in spite of its elegant looks. You aren't going to hurt it by dry firing a couple of times in the store. A set of snap caps is cheap insurance if you are going to sit at home and dry fire hundreds of times, but don't sweat the function check.

Fine pistol at a moderate price. I love my 92FS, and I'll bet you love your M9, too.
TailGator is offline  
Old December 9, 2012, 12:00 AM   #6
Tom Servo
Staff
 
Join Date: September 27, 2008
Location: Foothills of the Appalachians
Posts: 10,235
At the very least, I'd suggest finding an NRA Basic Pistol class in your area. You'll be surprised by how much you don't know, and such knowledge is liberating. Furthermore, you'll be building good habits from the outset, instead of having to correct bad ones later.

The Beretta is a great first gun.
__________________
In the depth of winter I finally learned that there was in me an invincible summer.
--Albert Camus
Tom Servo is offline  
Old December 9, 2012, 12:26 AM   #7
EdInk
Senior Member
 
Join Date: May 27, 2009
Posts: 3,966
Review the 4 Basic Rules
__________________
Sic Semper Tyrannis
EdInk is offline  
Old December 9, 2012, 06:47 AM   #8
fireman1291
Junior member
 
Join Date: December 12, 2005
Location: Land O' Lakes, FL
Posts: 99
Looks like your questions were answered with solid advice!

You picked a great firearm as your first...never sell your first!
fireman1291 is offline  
Old December 9, 2012, 01:06 PM   #9
AgentCircus
Junior Member
 
Join Date: December 7, 2012
Posts: 4
Thanks! I already signed up for a class for next Sunday. Can't wait!
AgentCircus is offline  
Old December 9, 2012, 07:03 PM   #10
'88Scrat
Senior Member
 
Join Date: July 11, 2011
Location: Kansas
Posts: 233
Its been said already (seveal times in fact) but good choice. My 9mm is also an M9A1.

If memory serves M9A1s are leftovers from a Marine Corp contract (someone correct me on this if I'm worng, this is what I was told) which could explain why the ones I've seen seem to be slightly cheaper than a commercial (Italian made) 92FS. It is slightly different from other Beretta 9mms. It differs from the 92FS in that it has a beveled mag well and has a rail from the factory. They also come with those fancy coated magazines.

Mine has several thousand rounds through it and has not malfunctioned in any way, shape, or form. Congrats on a solid firearm.
__________________
BOOM
'88Scrat is offline  
Old December 9, 2012, 09:54 PM   #11
AgentCircus
Junior Member
 
Join Date: December 7, 2012
Posts: 4
Thanks! Mine was $29 more than the 92FS (both on sale at Turner's). Actually, I went in there looking to buy the 92FS until I realized that the M9A1 was on sale. Unfortunately, I live in California for the time being though so I don't think I'll be getting the sand-resistant magazines.
AgentCircus is offline  
Old December 10, 2012, 12:15 PM   #12
Noreaster
Senior Member
 
Join Date: January 30, 2011
Location: New England
Posts: 1,322
Great purchase. For cleaning kits I don't like the solid rod. I'd go with a bore snake or otis and a tooth brush, cleaning patches and solvent/oil. I like to use Hoppe's solvent and a decent oil or lube. You could always go with CLP for both. Just remember to properly lube that gun. The owner's manual will show you where to do it but it's needs lube.

Buy some ammo and eye/ear protection and go shoot.
Noreaster is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08850 seconds with 9 queries