The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old November 14, 2012, 03:45 PM   #1
dahinnant
Junior Member
 
Join Date: April 12, 2012
Location: JOCO NC
Posts: 6
Reloading 22-250

I'm trying to find out if anyone has reloaded a Hornady 53gr v-max boattail BC: .290 SD: .151 ..? I'm shooting a Remington model 700 26" heavy bull barrel 1:14 twist. It shoots 60, 55, and lower grain pills just fine. Hornady says that a 1:14 won't stabilize the 53grBT properly because of the length. The BC is too fancy to ignore for this round so I'd like to get them downrange in a group. Do you have any advice or reloading data for me? Any and all input is greatly appreciated.
Dan
dahinnant is offline  
Old November 14, 2012, 03:59 PM   #2
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,791
JBM Ballistics Stability calculator agrees (with some data extrapolated from Hornady's other bullets) that that bullet would be marginally stable from a 1:14 twist. However, I have found that calculation to be rather pessimistic with small bore cartridges so you'll definitely have to try it and see.

For data, there is tons of it available on-line for any of the similar Hornady bullets, such as at Hodgdon's site. Extrapolate from there, start low and work up.
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old November 14, 2012, 04:58 PM   #3
dahinnant
Junior Member
 
Join Date: April 12, 2012
Location: JOCO NC
Posts: 6
Thanks!

I called Hornady and the man I talked to seemed to be worth his salt. His analysis was to try it and see. He said the faster the better and the 26" barrel would give it a fighting chance. Any more advice is greatly appreciated.
Dan
dahinnant is offline  
Old November 14, 2012, 06:19 PM   #4
Kevin Rohrer
Senior Member
 
Join Date: May 19, 2010
Location: Medina, Ohio
Posts: 508
I would be surprised if it *doesn't* shoot well, as I have read messages elsewhere that it does well, giving velocities in the 3700fps range.

I have a box I plan to try next year using IMR4064 (1st choice), Varget, and BLC2. And if I used H380, it would definitely see trial use.
__________________
Member: Orange Gunsite Family, NRA--Life, Varmint Hunters' Assn., ARTCA, American Legion, & South Cuyahoga Sportsmen's Assn.

"Gunnery, gunnery, gunnery...all else is twaddle!" --Admiral Sir John Fisher, RN

Last edited by Kevin Rohrer; November 14, 2012 at 11:31 PM.
Kevin Rohrer is offline  
Old November 14, 2012, 10:43 PM   #5
crowbeaner
Senior Member
 
Join Date: June 4, 2007
Location: Upstate SC
Posts: 1,938
I have yet to find a 22-250 that didn't like H380; it's my first choice for one powder to load lots of calibers. My old 788 liked FC brass, CCI 250, 36.0 to 37.0 of H380 and a 55 grain Nosler Solid base(discontinued much to my dismay). I would assume the Ballistic Tip should shoot about the same. Try that charge with your 53 grain Hornady pill; I bet it shoots lights out too.
__________________
If you want your children to follow in your footsteps, be careful where you walk.
Beware the man that only owns one gun; he probably knows how to use it.
I just hope my ship comes in before my dock rots.
crowbeaner is offline  
Old November 15, 2012, 09:24 AM   #6
dahinnant
Junior Member
 
Join Date: April 12, 2012
Location: JOCO NC
Posts: 6
Powder choice

The H380 looks like a good stable load that should push it over 3700 but I'm worried that ill be packing too much powder in the case considering that long pill. H380 is tried and true sir. I would dispute the bullet before h380 haha.

I have some 4895 I was planning to try but after more research I think I'll try Varget and Benchmark. I'd like to work those long 53's up to 3800fps. Fingers crossed.

I'll try both of your suggestions if at all possible this weekend and post the results. Thanks again!
dahinnant is offline  
Old November 15, 2012, 11:24 AM   #7
ForneyRider
Senior Member
 
Join Date: December 4, 2007
Location: Forney, TX
Posts: 725
I use 35gr of Varget for 3900fps with Hornady 50gr V-Max. This is 2-3gr below max. This is out of a 700 VLS with 1:14tw 26in barrel. Varget and R15 are cleaner than H380. 1:14 likes 40-55gr the best. But a 60gr wouldn't be bad, I am sure the 53gr is shorter than the 60.
__________________
When all is said and done, there is a lot more said than done.
ForneyRider is offline  
Reply

Tags
22-250 , 53gr v-max , hornady , reloading

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07329 seconds with 9 queries