The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools
Old November 10, 2012, 06:39 AM   #1
kcub
Senior Member
 
Join Date: October 24, 2010
Location: Austin, Texas
Posts: 2,017
looking for a Colt SAA .44 special cylinder

Does anyone know where I might find one? I have a Colt SAA in .44-40.
kcub is offline  
Old November 10, 2012, 09:29 AM   #2
Aguila Blanca
Senior Member
 
Join Date: September 25, 2008
Location: CONUS
Posts: 6,319
VTI Gun Parts has .44 Magnum cylinders for one or more of the Italian clones, but it's oversized in both length and diameter to fit a SAA. What might work, though, would be to buy a replacement .44-40 cylinder from them and have it reamed for .44 Special.
Aguila Blanca is offline  
Old November 10, 2012, 03:04 PM   #3
Bob Wright
Senior Member
 
Join Date: July 10, 2012
Location: Memphis, Tennessee
Posts: 1,847
If you're going to do that either buy a .357 Magnum cylinder, or a blank cylinder from Brownell's. The head diameter of the .44-40 is larger than the .44 Special. The .44 Special is .457" dia., the .44-40 is .476"~.480"dia.

Bob Wright
Bob Wright is offline  
Old November 10, 2012, 04:47 PM   #4
gak
Senior Member
 
Join Date: February 28, 2005
Location: Aridzona
Posts: 2,767
+1 get a .357 cylinder and have it rechambered. Had it done for a friend many times. Also, very occasionally a .44-40 owner will have a convertible/spare .44 Special they have no use for. Keep your eye out/post WTB in the Classifieds. The former you could conceivably have a new re-chambered cylinder in your hands within a few weeks. The latter you might wait months for.
gak is offline  
Old November 10, 2012, 07:31 PM   #5
Newton24b
Junior member
 
Join Date: February 10, 2009
Posts: 974
unless you use a cylinder that came with your own gun, chances are youll be needing a GOOD gunsmith to get the new cylinder adjusted. if you have
Newton24b is offline  
Old November 11, 2012, 06:20 AM   #6
kcub
Senior Member
 
Join Date: October 24, 2010
Location: Austin, Texas
Posts: 2,017
who does rechambering? cost? I wonder if I could send it back to Colt for one fitted.
kcub is offline  
Old November 11, 2012, 06:23 AM   #7
UtopiaTexasG19
Senior Member
 
Join Date: July 3, 2011
Location: S.E. Texas Gulf Coast
Posts: 743
You might want to try the Colt Forum...
http://www.coltforum.com/forums/forum.php
UtopiaTexasG19 is offline  
Old November 11, 2012, 10:33 PM   #8
DFrame
Senior Member
 
Join Date: March 7, 2008
Location: central Illinois
Posts: 451
Yes. You certainly can send it back to Colt. They'll sell you a cylinder AND fit it for you. It probably would be a bit pricey, but Colt is generally competitive with the top notch free market smiths. The plus is that it will be done right, and will be 100% Colt.
__________________
Mark Lane to William Buckley: "Have you ever referred to Jessee Jackson as an ignoramus?"
Buckley: "If I didn't, I should have"
DFrame is offline  
Old November 12, 2012, 04:59 PM   #9
WIL TERRY
Senior Member
 
Join Date: July 6, 2000
Location: BLACK HILLS
Posts: 1,125
DO NOT FORGET TO INCLUDE THE COST OF A NEW HIGHER FRONT SIGHT. The 44-40 200GR bullets will shoot four to six clicks under the 240-250GR bullets of the 44SPL depending upon the propellent and charges used.
IF you decide to just shoot 200GR bullets in the 44SPL cylinder you might as well save your money as the 44-40 can and will do everythying with 200GR bullets that the 44SPL can accomplish.
ON the other hand, my COLT NEW FRONTIER 44-40/44SPL convertible shoots like a champ with both cartridges and ALL bullet weights.
And so it goes...
WIL TERRY is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08357 seconds with 9 queries