The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old November 8, 2012, 09:29 AM   #1
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 8,446
OK... I'm not an idiot... really



just saw this today in another thread...

Quote:
When it's time to change the barrel have it trued up (blue printed) & bed the action if your looking for accuracy.
so is there something I'm not getting here ??? what the heck is "blueprinting"

I've always thought a blueprint was a drawing of a something, or a piece of it... did it somehow become a mechanical process, or is this just some "buzz word" or is someone doing a "drawing" of the assembly, like that will make the rifle more accurate

I mean I understand the concept of "trueing up" & "bedding", but what does blue printing have anything to do with it ( I see this term with engines & other performance improvements on mechanical objects... example "that engine is balanced & blueprinted" ) so is it a process, rather than a drawing ???
__________________
In life you either make dust or eat dust...

Last edited by Magnum Wheel Man; November 8, 2012 at 09:36 AM.
Magnum Wheel Man is offline  
Old November 8, 2012, 09:32 AM   #2
spacecoast
Senior Member
 
Join Date: October 14, 2009
Location: Sunshine and Keystone States
Posts: 4,152
From the Wikipedia article on engine tuning at http://en.wikipedia.org/wiki/Engine_tuning#Blueprinting

Blueprinting

In engine blueprinting, all the specifications are double-checked. Usually this indicates closer-than-factory tolerances, with custom specifications appropriate for a street car or a race car. The goals are either to re-manufacture the engine to the rated power for its manufacturer's design (because not all mass-production engines put out the rated power), or rebuild the engine to make more power from a given design than otherwise intended (because custom engines can often be redesigned to different specifications). Blueprinted components allow for a more exact balancing of reciprocating parts and rotating assemblies so that less power is lost through excessive engine vibrations and other mechanical inefficiencies.
Ideally, blueprinting is performed on components removed from the production line before normal balancing and finishing. If finished components are blueprinted, there is the risk that the further removal of material will weaken the component. However, lightening components is generally an advantage in itself provided balance and adequate strength are both maintained, and more precise machining will in general strengthen a part by removing stress points, so in many cases performance tuners are able to work with finished components.
For example, an engine manufacturer may list a piston ring end-gap specification of 0.003 to 0.005 inches for general use in a consumer automobile application. For an endurance racing engine which runs hot, a "blueprinted" specification of 0.0045" to 0.0050" may be desired. For a drag-racing engine which runs only in short bursts, a tighter 0.0035 to 0.0040 inch tolerance may be used instead. Thus "blueprint" can mean tighter or looser clearances, depending on the goal.
spacecoast is offline  
Old November 8, 2012, 09:35 AM   #3
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 8,446
so this loosely translates to guns, & in reality, just means carefully & tightly assembled ???
__________________
In life you either make dust or eat dust...
Magnum Wheel Man is offline  
Old November 8, 2012, 10:53 AM   #4
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,540
"...just means carefully & tightly assembled???"

Yeah, basically. Some machining to minimize clearances or tolerances. As example, consider the range for headspace. Blueprinting would result in a chamber with the exact minimum. Another example would be machining of the bolt-face so that it is exactly 90 degrees to the axis of the bore.

Blueprints show dimensions, with some sort of plus/minus tolerances which have been found to allow use of the item. "Blueprinting" means spending the time, effort and money to achieve minimum tolerances. It can be done in manufacturing, but that's why a Rolls Royce costs more than a Ford, or a Purdey costs more than a Remchester.
__________________
You're from BATFE? Come right in! I use all your fine products!
Art Eatman is offline  
Old November 8, 2012, 11:15 AM   #5
B.L.E.
Senior Member
 
Join Date: December 20, 2008
Location: Somewhere on the Southern shore of Lake Travis, TX
Posts: 1,979
"Blueprinting" is an old race engine builder's term. The goal is to make the engine as good as it can possibly be but still legally be factory stock.
Carefully degreeing a stock cam and matching the combustion chamber volumes with carefully matched stock pistons is "blueprinting".
Putting in a race cam and high compression pistons is modifying.
B.L.E. is offline  
Old November 8, 2012, 11:21 AM   #6
taylorce1
Senior Member
 
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 5,559
To me it has always meant squaring and truing the receiver and bolt face to the centerline of the bore. If everything lines up straight and true then you'll have an accurate rifle as long as the nut building the ammo and pulling the trigger is doing their job.
__________________
NRA Life Member
The Truth About Guns
taylorce1 is offline  
Old November 8, 2012, 11:38 AM   #7
cw308
Senior Member
 
Join Date: September 2, 2010
Location: Long Island NY
Posts: 485
I also at first didn't know what it meaning was. Went on line, blueprint a rifle. Found it very interesting, When I need to rebarrel my rifle I will have it Blueprinted. Hope I helped Chris

Last edited by cw308; November 8, 2012 at 05:57 PM.
cw308 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08070 seconds with 9 queries