The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 23, 2001, 07:08 PM   #1
SharpCdn
Member
 
Join Date: July 29, 1999
Location: Ottawa, Canada
Posts: 72
Hello,

I'm buying a case of Hornady 9mm (124gr FMJ RN) bulk bullets and have no previous experience with them. I am hoping to draw upon the vast pool of knowledge and experience in this forum to help me out here as far as what kind of results I can expect from them.

Of course they are for paper punching only so accuracy, and function are my only interests. They will be used mostly in my (new in box) standard Browning High Power (circa 1986), which I just bought.

Anybody here have any positive or negative things to say about these bullets? I am really interested to hear feedback concerning them, I want to have realistic expectations from them.

I'll be working up loads using H.Universal, and 231 for comparison. Any pet loads using these powders (or any others) with 124 FMJ (or other bullets) would also be greatly appreciated!

This site is the best! What a fantastic resource.

Happy shooting, and reloading, and shooting...etc...to all!
SharpCdn is offline  
Old March 24, 2001, 05:15 PM   #2
Johnny Guest
Moderator Emeritus
 
Join Date: August 28, 1999
Location: North Texas
Posts: 4,116
9 mm loads


SharpCdn--

No personal experience with the Hdy 124 FMJ, but I really like their XTP bullets in .38 Spl, .357 and 9 mm.

Since you ask about H. Universal, though, I recently loaded up some two thousand Remington 124 JHPs with 4.6 gr. of Universal. Elder son and I have shot several hundred in a Glock 19, a Kahr P9, my old Canadian High Power and a Kel Tec P-11. They chronographed 1071 in the Kahr and 1095 in the Glock 19. I imagine they'd just top 1100 in my Inglis.

Sorry, I don't have any data on W-231 powder with the 9 mm 124 bullets. I know I have loaded some but I don't find chronograph notes just this minute.

The 4.6 load was a logical step--A hunting buddy has been loading 4.8 with the 116 FMJ for steel plate matches, and that load came directly from Hogden's web site. Anyhow, this is a good, accurate load, and I have fed my guns a lot of much hotter stuff.

Hope you enjoy your High Power as much as I have mine.

Best,
Johnny
__________________
MOLON LABE!
Amendment II ensures the rest of the Bill of Rights.

Blog: Expert Witness
Johnny Guest is offline  
Old March 24, 2001, 11:50 PM   #3
Steve in PA
Senior Member
 
Join Date: October 14, 1999
Location: Northeastern PA
Posts: 604
I usually buy the Hornady 115 grain FMJ in bulk. I have no problems with them in my Beretta 92FS.
Steve in PA is offline  
Old March 25, 2001, 10:44 AM   #4
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
IME 9mm Hornady bullets run .354-.355" and are normally very accuracy-capable.
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old March 26, 2001, 12:40 PM   #5
Mikul
Senior Member
 
Join Date: March 21, 2000
Posts: 1,396
I liked the case that I fired, but haven't seen them in bulk for a while. Where are you purchasing them from.

My 124gr pet load is 4.4gr of 231 with 1.12"OAL.
Mikul is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06761 seconds with 9 queries