The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old October 25, 2012, 02:09 PM   #1
300magman
Senior Member
 
Join Date: September 12, 2008
Posts: 714
Very Low Report & Stuck Shell that won't Eject

Has anyone ever fired a seemingly normal shotgun shell, only to have thier gun completely frozen and unable to extract (or open the action) ?


The gun was an old (and faithfully reliable 870) and the shell was a winchester upland game load. I fired at a bird and heard a very quiet report compared to normal; the bird dropped, full of shot just as normal, but upon trying to chamber a new round I found the action completely stuck.

I had to very very forcefully grab the slide with both hands and slam it down, with the butt of the gun on the ground to get the action to open and the shell to eject. . . I am probably very luck that the shell actually came out instead of just tearing the rim off, considering how much force it took to open.

P.S. The gun continues to work perfectly and I shot several more birds that afternoon with the same box of shells.
300magman is offline  
Old October 25, 2012, 02:39 PM   #2
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,223
Yes, I've seen it happen ...( not with my own guns ) ...but at my local range once in a while....and typically its the shell that is a little out of spec that causes the issue ....but if the gun isn't clean and properly lubed / or parts are really starting to wear it can happen as well.

At the very least...I'd suggest you completely strip the gun down ( take out the trigger group, etc ) and thoroughly clean and lube - and inspect - everything and reassemble.
BigJimP is offline  
Old October 30, 2012, 09:23 AM   #3
publius
Senior Member
 
Join Date: January 25, 2005
Location: Mississippi/Texas
Posts: 2,443
Had it happen with duck shelld that had developed a litttle rust. My sophisticated solution was the same as your, deppress slide release and smack the butt on the ground.Got to be good for the extractor!
__________________
"Suppose you were an idiot, and suppose you were a member of Congress, but I repeat myself." Mark Twain
publius is offline  
Old October 30, 2012, 07:07 PM   #4
idek
Senior Member
 
Join Date: August 20, 2009
Posts: 579
Between my brother and I (he has an 870, I have a 500), we've had a few shells get stuck in the chambers. Every time it involved inexpensive Winchester shells. We stopped using those shells and haven't had problems since.
idek is offline  
Old November 1, 2012, 08:36 PM   #5
300magman
Senior Member
 
Join Date: September 12, 2008
Posts: 714
BigJimP - In this case the gun is in great shape, and I just went through it about 50 rounds ago (as I always do before the season), so dirt or lube isn't the culprit


idek - Interesting !! It was a cheap winchester that I was firing at the time.
I have already decided to give up on pretty much all winchester ammo due to very inconsistently light loads and the occasional "big boomer" that recoils like a monster and sometimes blows the birds to bits. This day I just happened to find one in the pocket of an old coat and decided to give it a proper send off.
I've also had some cheap bulk box rifle ammo that flattened primers badly and one that didn't even have a flash hole. FYI a LR Primer with next to no room for expansion creates enough pressure to stick a bolt pretty solid.

So yes, I'm off of Winchester's cheap stuff...maybe all Winchester ammo.
300magman is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06562 seconds with 9 queries