The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 21, 2012, 05:15 AM   #1
1warewolfhntr
Junior Member
 
Join Date: April 30, 2012
Posts: 8
light loads

looking to make some light loads for for my nephew he has never shot rifle (centerfire)and is small framed .is it better to load a heavier bullet or a lighter bullet.i plan on reducing powder to lightest i can for my 6mm to make it easy and enjoyable for him.
1warewolfhntr is offline  
Old October 21, 2012, 05:27 AM   #2
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
recoil IS science

Lighter bullet, lower charge weight.
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old October 21, 2012, 08:57 PM   #3
Mule
Member
 
Join Date: October 16, 2002
Location: Union, Missouri
Posts: 47
If the ammo is for plinking, try to find some cast bullets. You can load them pretty mild with Unique or Red Dot. I am doing exactly that with a 308.
__________________
Shoot Safe!
Shoot Often!
Mule is offline  
Old October 21, 2012, 10:26 PM   #4
highbrow
Member
 
Join Date: November 22, 2007
Location: Montana
Posts: 92
My son shot his first deer with a .308 Win using a 125gr SP and 21gr 2400. Probably 2000fps. DRT at 125 yds. Very minimal recoil or muzzle blast.
__________________
Mosin: Know the safety, Love the safety, Be the safety

There are some corners of this country which have bred the most terrible things, things that act against everything we believe in. They must be fought. FBHO- Free Edward Snowden
highbrow is offline  
Old October 22, 2012, 07:06 AM   #5
Gdawgs
Senior Member
 
Join Date: June 1, 2009
Location: Hutchinson, MN
Posts: 591
You can use Trail Boss powder with any bullet you like and it will be an easy shooter.

You don't even need any load data.

http://www.imrpowder.com/PDF/Trail-Boss-data.pdf
Gdawgs is offline  
Old October 22, 2012, 07:08 AM   #6
jwrowland77
Senior Member
 
Join Date: March 23, 2012
Location: Conway, Arkansas
Posts: 982
H4895 is great for reduced loads as well. My daughter has shot well over 200 rounds of reduced recoil loads using H4895 without any issues. I have gradually increased the load I use for her so now I am around a start load. YMMV.
jwrowland77 is offline  
Old October 24, 2012, 04:51 AM   #7
Mike / Tx
Senior Member
 
Join Date: April 8, 2000
Posts: 1,316
^^^

Similar loads only for my oldest grandson when he was only 3.5yrs old.

go look up the Reduced Rifle Loads on the Hodgdon site. It has specific instructions on how to reduce any load listed using H-4895.

I used the redced 125gr load for my grandson when he got it in his head he wanted to shoot himself a hog not long after his 3rd birthday. He practiced with it all summer long from a 6.5# Ruger Compact, and opening weekend of that deer season he dropped his hog.


Like was mentioned the great thing about using this particular data is that you can creep the charge weight up a little at a time all the way up to the standard max load level if wanted. I found with the grandson's loads that bumping it up in small increments had very little if any change to the accuracy. He is now 10 and shooting standard powdered loads form several rifles, and I am starting out working with his two younger brothers, 6 & 4. So far neither of them are quite as gung ho about the whole deal. LOL
__________________
LAter,
Mike / TX
Mike / Tx is offline  
Old October 24, 2012, 12:12 PM   #8
rodfac
Senior Member
 
Join Date: January 22, 2005
Location: Kentucky
Posts: 1,518
Try a lighter than normal bullet the caliber, and a starting level powder charge. That's worked for me over the years sometimes with surprising accuracy results. Be aware that a sight change will almost certainly be called for.

2400 or 4759 are a good powders to try in most deer hunting calibers of the non-magnum persuasion: .30-30, .32 Special, 300 Savage, 30-06, 30 carbine, .30-40 Krag, 270 etc. Velocities down in the 1500-1600 fps range shoot well and are easy on the shoulder of an inexperienced shooter...and very accurate out to 100 yds too. Muzzle blast is minimized as well....making the experience more fun for all.

For powder puff loads with .22 lr recoil, Unique works well, but at 50 yards or less ranges. Commercially cast bullets are another option...I've had good luck with Missouri Bullets gas-checked ones for any of the above cartridges.

HTH's Rod
__________________
Our Flag does not fly because the wind blows against it, it is moved instead, by the dying breath of our patriots in uniform. Our Freedom is not free, it's been paid for many times over.
USAF Forward Air Controller, 5th Spl Forces,
An Loc, lll Corps, RVN, 69-70, Vietnam Vet '69-'73
rodfac is offline  
Old October 25, 2012, 02:35 AM   #9
1warewolfhntr
Junior Member
 
Join Date: April 30, 2012
Posts: 8
thanks for the ideas shooters
1warewolfhntr is offline  
Old October 31, 2012, 09:41 PM   #10
kilotanker22
Senior Member
 
Join Date: October 14, 2012
Posts: 412
I agree with most of the posts here. H4895 should work very well. However be very wary if you try to use slower powders with light charge weights. Seems a little odd but in the 6 mm and the 243 light charges of slower powder cause very high pressure increases.

Stick with the lighter powders mentioned above and you will be dandy.
kilotanker22 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09294 seconds with 9 queries