The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old October 27, 2012, 10:26 AM   #1
DD4lifeusmc
Senior Member
 
Join Date: October 12, 2012
Location: Wyoming
Posts: 160
speaking of cleaning

we already have a thread about the best cleaning solution (water or store bought)
So.
What do you all use for cleaning patches? And do you use once and throw away, or clean and reuse?
Way back in the day store bought were actually a cloth material, now I see they are a type of paper or some such.
DD4lifeusmc is online now  
Old October 27, 2012, 11:58 AM   #2
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,718
I got a fairly large supply of Outers shotgun patches years ago during a clearance sale I'm still using. When I run out of those I'll probably cut up an old bed sheet.
Hawg is offline  
Old October 27, 2012, 12:04 PM   #3
DD4lifeusmc
Senior Member
 
Join Date: October 12, 2012
Location: Wyoming
Posts: 160
cleaning

I see.
I normally use an old holey flannel shirt. Cut patches as needed and use the rest to wipe the gun down. Eventually need another new shirt anyway.
I put the patches in an old pair of nylons and run through the wash. Reuse them at least twice before tossing.
well Happy Shooting!
DD4lifeusmc is online now  
Old October 27, 2012, 02:34 PM   #4
arcticap
Senior Member
 
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 2,973
I cut patches from old tee shirts.
I use an undersize jag, cut over size patches and fold them over several times to fit the bore more tightly.
These large patches can be re-folded several times in different ways to use another part of the patch that remains clean.
arcticap is offline  
Old October 27, 2012, 02:39 PM   #5
TylerOutdoorsman
Member
 
Join Date: October 21, 2012
Location: Waxahachie, TX
Posts: 49
I cut old t-shirts into patches of a appropriate size. Then you can control the exact size for a snug fit in your bore.
TylerOutdoorsman is offline  
Old October 27, 2012, 02:49 PM   #6
DD4lifeusmc
Senior Member
 
Join Date: October 12, 2012
Location: Wyoming
Posts: 160
cleaning

Thanks for the replies guys!
Happy shooting!
DD4lifeusmc is online now  
Old October 27, 2012, 04:04 PM   #7
mykeal
Senior Member
 
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,758
100% cotton.

When I run out of old shirts, skivvies, etc. I just stop by the dry goods store (a Ben Franklin in my area) and buy a couple yards of white cotton flannel. Thousands of patches for a couple bucks and a couple hours with a sharp knife.
mykeal is offline  
Old October 27, 2012, 05:39 PM   #8
bedbugbilly
Senior Member
 
Join Date: November 19, 2009
Posts: 2,209
I'm lazy so I just buy ready made cotton patches. You can still get 'em at most LGS. I usually buy them in the larger quantity bags. Since I shoot a lot of 38 spl. etc. - they work well for my Navies as well. For what they cost, it's a whole lot less time consuming than sitting and cutting and the time I'd use for that is better spent in other pursuits. If I'm in a pinch, I'll use old tee shirts, etc. or various material that I have on hand - as long as it's 100% cotton.

For shooting patches though - it's the old standby of pillow ticking (cotton) as that works the best in my rifles/smoothbore.
__________________
If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63
bedbugbilly is offline  
Old October 27, 2012, 11:39 PM   #9
Captainkirk
Senior Member
 
Join Date: September 21, 2012
Posts: 137
That's where my old Tee shirts and skivvies go
Captainkirk is offline  
Old October 28, 2012, 12:05 AM   #10
shortwave
Senior Member
 
Join Date: December 17, 2007
Location: SOUTHEAST, OHIO
Posts: 5,936
Don't believe I've ever bought a cleaning patch in my life.

As with many here, the old T-shirts are my patch's.
shortwave is offline  
Old October 29, 2012, 11:41 AM   #11
Wild Bill Bucks
Senior Member
 
Join Date: December 28, 2005
Location: Southeastern Oklahoma, Next door to Sasquatch
Posts: 1,264
Mrs WBB likes to use old t-shirts and underwear for her wood staining hobbies, so the first time she caught me cutting them up for patches, she went to the local gun shop, and bought every cleaning patch they had on the shelf.

That was close to 30 years ago, and I still have a pillow case full of them.
Wild Bill Bucks is offline  
Old October 29, 2012, 01:13 PM   #12
Doyle
Senior Member
 
Join Date: June 20, 2007
Location: Starkville, MS (new to MS)
Posts: 4,767
This is where I will differ from most of the others. For black powder cleaning, I really like using pre-cut patches made for a .50 cal. They are cheap and I don't have to guess whether they are the right size or not. A few bucks at Walmart will get you enough to last for a couple years (more if you catch the post-season clearance rack).
Doyle is online now  
Old October 29, 2012, 02:28 PM   #13
Sure Shot Mc Gee
Senior Member
 
Join Date: January 2, 2012
Posts: 2,047
I'm not that frugal.

At times I do think its good to spur the economy. And this is one of those occasions I have in mind OP.
I'll buy the BIG economy size bag of Ox-Yoke G.I. square patches from TOTW every few years. No washing and/or hanging them out on my wifes clothes lines to dry. Nor dry cleaning. No saving a good look'in used one for a rainy day either. "B/P patches. When used Sir. "Always somehow end up pitched in the trash" by me or at the disappointment of my wife occasionally. Reason to hoard my flannel shirts: I save those flannel shirts torn up patachings for my more modern hunting equipment. Example: Iver Johnson 410 single shot or my Steven's model (Favorite) 22 cal. _
Sure Shot Mc Gee is online now  
Old October 29, 2012, 08:00 PM   #14
Pahoo
Senior Member
 
Join Date: February 16, 2006
Location: IOWA
Posts: 5,579
Another vote for the skivvies

Quote:
I cut patches from old tee shirts.
I especially like this type of weave for M/L use as it has such an open weave that helps to trap powder-mud. The flannel type, I use mostly on rim and center fire. I don't even give the thin paper types a second look. I once had a small piece break off into one of my M/L bores and it was just enough to start giving me hang-fires. .....

Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing.
Pahoo is offline  
Old October 29, 2012, 08:35 PM   #15
DD4lifeusmc
Senior Member
 
Join Date: October 12, 2012
Location: Wyoming
Posts: 160
cleaning

I had to buy a new cleaning kit couple weeks ago. It had everything in the kit.
rods, tips, wire brush, cotton swabs on a screw in fitting, hoppes, and patches.
That's when I noticed they went to a type of paper.
I never throw anything out that is still usable, so will use them for the revolver.
But otherwise the flannel shirt.
Time cutting is not wasted. it's still time spent on our hobby.
And provides eye hand coordination!
Have fun shooting!!
DD4lifeusmc is online now  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09863 seconds with 9 queries