The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 28, 2012, 06:52 PM   #26
tkglazie
Senior Member
 
Join Date: December 3, 2011
Posts: 558
glad this thread woke up. Lots of great info here for newbies. Threads like this are one of the things that make this a great forum.
tkglazie is offline  
Old Yesterday, 09:20 AM   #27
DBCT
Junior Member
 
Join Date: July 13, 2004
Location: Phoenix, AZ
Posts: 3
Many thanks- I, too, just started reloading- and still have all my fingers,
only because I just started and haven't shot any of my reloads yet.
However, the SAAMI drawings- particularly the minimums, and the math
used to determine seating depth and space used, are extremely helpful.
In all my reading, I haven't seen this information together in one place.
DBCT is offline  
Old Yesterday, 01:29 PM   #28
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,108
The 125g LRN should have an OAL between 1.125" and 1.155"; recommend the 'start' OAL allow a wee bit of 'shoulder' above the case rim.
I use 1.130".

I load (most of my) 125g LRN over:

-5.4g Power Pistol
-5.4g WAP
Mostly.....
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old Yesterday, 03:43 PM   #29
tangolima
Senior Member
 
Join Date: September 28, 2013
Posts: 464
When trying to reuse load data of a different bullet, same weight but different ogives, it is the seating depth that matters, not the col.

For cast bullets I generally seat deeper, especially so for bullets with abrupt profiles, such as swc. This helps feeding. This is because cast bullets usually are 0.001" to. 0002" bigger than the bore. It may get hung up trying to squeeze its way into the leade, if it has more than enough to squeeze into.

I love and hate cast bullets. I generally avoid them if I can so that I don't need deal with lead.

-TL
tangolima is online now  
Reply

Tags
cast bullets , load data , oal , reloading 9mm , seating depth

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06992 seconds with 10 queries