The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 13, 2012, 09:09 PM   #26
Gerry
Senior Member
 
Join Date: December 24, 2010
Location: Canada
Posts: 382
Quote:
if I could buy new loaded ammo for less I sure would!!
I cast my own bullets too, so mine run about the same cost. I just pay for powder and primers, both bought in bulk. Between my wife and I, we shoot about 1,000 rounds per week on average. It would be a significant cost if we were shooting commercial rounds at Canadian prices - at least $15,000 to $20,000 per year.

Many of the world's best shooters load their own, and would continue to do so regardless of the cost of commercial rounds. Shooters like Eric Grauffel or Brian Enos would faint if they were forced to have someone other than themselves crank they press. How much is their time worth?
Gerry is offline  
Old October 15, 2012, 09:33 AM   #27
hulley
Senior Member
 
Join Date: November 9, 2008
Location: Hoschton, Ga.
Posts: 717
I reload alot of 9mm. For the obvious reasons of my own load, cost savings and its something I enjoy doing. I'm not much for watching TV so I'll go out to my bench load up a few hundred and be done with it. Also when I go to my buddies property to shoot, I'll give him a couple hundred rounds as a thank you. Its a nice jesture and saves him a bunch because he doesnt reload.
__________________
Nov 2, 2011 sent form 4, SS Sparrow. Arrived May 29, 2012.
Jan 30, 2012 sent form 1 for SBR. Arrived July 12, 2012
Jan 22, 2013 Sent form 4, 762-SDN-6. Arrived Sept 13, 2013
hulley is offline  
Old October 15, 2012, 10:05 AM   #28
DFrame
Senior Member
 
Join Date: March 7, 2008
Location: central Illinois
Posts: 451
I save it up until I get enough to take to the recycler.
__________________
Mark Lane to William Buckley: "Have you ever referred to Jessee Jackson as an ignoramus?"
Buckley: "If I didn't, I should have"
DFrame is offline  
Old October 15, 2012, 12:09 PM   #29
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,045
Like others, I primarily load as part of the gun hobby ....and my reloads are way more accurate than most any inexpensive ammo...

I use a premium bullet, Montana gold 115 gr ...my 9mm reloads are $ 5.88 for a box of 50 ....and retail in my area is $10 - $14 for a box of 50 rds.../ so I shoot at least twice as much, with the same ammo budget...

I reload a lot of 9mm ...( and .40S&W, .45 acp, .38spl, .357 mag and .44 mag ) ....but last year I reloaded over 16,000 rds of 9mm....and I'll do at least that much by the end of December this yr.
BigJimP is offline  
Old October 15, 2012, 05:24 PM   #30
Prof Young
Senior Member
 
Join Date: August 21, 2007
Posts: 573
Cheaper to reload

Loaders:
Yea, I haven't cranked all the numbers, but I'm confident that I'm reloading 9mm for less than I can buy it new. 8 or 9 cents for the bullet, a few pennies for the primer and powder . . . cheapest bulk ammo is still around 20 cents a shot.
Live well be safe.
Prof Young
Prof Young is offline  
Old October 15, 2012, 07:15 PM   #31
kron
Member
 
Join Date: November 9, 2008
Posts: 36
I've been selling all the 9mm range brass I get to the local scrap dealer. Might have to keep some back for a new PIF thread. I like that idea.

Scrap dealer gives $2/lb right now for range brass. The 400lbs or so of 9mm I sold to them last month helped pay for the next batches of mixed brass I bought.

It's amazing the chamberings you can find in the range brass from an indoor 25yd range... 45-70, 30-06, 460 s&w, 270, lots of big stuff I wasn't expecting.
kron is offline  
Old October 15, 2012, 07:38 PM   #32
Tinner666
Senior Member
 
Join Date: September 12, 2012
Location: Richmond, Va.
Posts: 330
I was crunching numbers and it looks like MG 115 JHP's will run me about $5.15 a box to reload using CCI 500's and Universal Clays. Best deal I could find on retail ammo was about $14.00 on sale. Not that I've looked everywhere.
Now, I just need more brass too since all I have so far is from my retail buys. LGR sells that for about $40.00 per 1000.
__________________
Frank--
Member, GoA, NRA-ILA, SAF, NRA Life Member
Tinner666 is offline  
Old October 15, 2012, 07:51 PM   #33
Tex S
Senior Member
 
Join Date: November 12, 2008
Location: Fort Worth, TEXAS
Posts: 773
I remember when I first started shooting 9mm about 10 years ago. You could get a box for $2.50 at Academy. Now the price is just crazy... $14 or $15 for fifty at Cabelas.

I picked up a Beretta 92 on the cheap last year. It came with 300 or 400 rounds but they are all gone now. I will be reloading for this caliber for sure. I can load Berry's 115's over W231 for $6.50 per box.

I'll save the $8 or $9 bucks per box, thank you.

I was out at Front Sight last week and bought Magtech 115's for $11 or $12.

By the way, I will buy any extra 9mm brass you have.


Ready to talk guns and hunting after my yearly summer hiatus. Glad to be back!

Last edited by Tex S; October 15, 2012 at 10:23 PM.
Tex S is offline  
Old October 15, 2012, 11:17 PM   #34
serf 'rett
Senior Member
 
Join Date: June 25, 2009
Location: Stuttgart
Posts: 1,262
Current Wally World price is 23.95 plus 2.16 tax for total of $26.11 per Winchester White box 100 round box.

My cost to reload is around $11.18 per 100 rounds. Plated or lead bullets and buying bulk from online suppliers.

I don't even need my engineering degree to figure which is cheaper. (added bonus is tuned ammo and the fun of tinkering with loads!)

What do I do with 9mm brass? Try to find 'em. The range pixies hide 'em in the grass.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part.
serf 'rett is offline  
Old October 16, 2012, 07:42 AM   #35
res45
Senior Member
 
Join Date: September 15, 2007
Posts: 548
Back in the day when I had a public range to shoot at I picked up ever piece of 9mm brass I could get my hands on and everything else for that matter. Even though at the time I didn't own a 9 mm like I do now I had a 9 x 18 Mak. that I converted cases to from once fired 9mm brass,those little guns can really throw the brass out there.

Brass is one of the expensive parts of reloading any cartridge even once fired that you buy but free is free so when you loose one you have lost nothing and since I cast my own bullets for ever cartridge I shoot and have for years my bullet cost is basically 0 to 2.5 cents if I use a gas check bullet.

I probably have more 9mm brass that I can ever wear out I don't loose much either as I use a knockdown net that I run along a cable down my shooting lane to knock my brass down especially the 9 x 18 cases.

Last edited by res45; October 16, 2012 at 03:59 PM.
res45 is offline  
Old October 16, 2012, 08:16 AM   #36
Don P
Senior Member
 
Join Date: December 17, 2005
Location: East Central Florida
Posts: 4,709
I have been scrounging brass since 2006 and took all the 9 mm I could get. Folks thought I was crazy reloading 9 mm. I wonder what they are thinking now? As of now I have 6,500 rnds. of 9 mm reloaded and 7,000 cases waiting for reloading. You could bag them up by the 1k and ask $25-30 per bag if you choose not to reload, or find someone that will reload for you and use the brass that way.
__________________
NRA Life Member, NRA Range Safety Officer, IDPA Safety Officer
As you are, I once was, As I am, You will be.
Don P is offline  
Old October 18, 2012, 11:50 AM   #37
kealil
Senior Member
 
Join Date: July 27, 2011
Posts: 205
I personally reload the brass. I also cast my own bullets so my reloads are about 2.50 per 50. Plus they're really accurate.
__________________
"A weapon without a name is nothing; Just another hunk of steel, wood, or what have you. A weapon with a name is more. It is a partner, a friend, and a comrade to the end"
kealil is offline  
Old October 18, 2012, 01:04 PM   #38
pgdion
Senior Member
 
Join Date: April 22, 2010
Location: MPLS, MN
Posts: 1,096
I reload it. You only save a little (but a little is a lot these days) but I also like reloading it and I can load things I can't readily buy (like the 124gr FP). But with 9mm I do tend to acquire more brass than i shoot. I clean and bag it and leave it ready to go. Haven't reached the point of having to much brass yet (I have a lot of attic space ).
__________________
597 VTR, because there's so many cans and so little time!
pgdion is offline  
Old October 18, 2012, 03:49 PM   #39
publius
Senior Member
 
Join Date: January 25, 2005
Location: Mississippi/Texas
Posts: 2,432
I have a couple of wooden wine crates full of it. If I ever get a progressive I'll reload it.
__________________
"Suppose you were an idiot, and suppose you were a member of Congress, but I repeat myself." Mark Twain
publius is offline  
Old October 18, 2012, 05:54 PM   #40
Wahoo95
Member
 
Join Date: February 19, 2007
Location: Charlotte, NC
Posts: 62
I reload it.....at about $9/100 for my preferred 147gr loads
Wahoo95 is offline  
Old October 18, 2012, 08:58 PM   #41
orionengnr
Senior Member
 
Join Date: July 9, 2004
Posts: 4,969
I have never reloaded 9mm yet...but I think I have about 10k tumbled 9mm brass. One day I will get around to it.

In the mean time, I still pick it up. I have given away...I don't know how many thousand rounds to guys who are just getting into loading. But I never seem to have a problem finding someone to take them.
orionengnr is offline  
Old October 18, 2012, 10:16 PM   #42
armoredman
Senior Member
 
Join Date: May 22, 2007
Location: Arizona
Posts: 3,655
Like Big Animal said, I reload 9mm and cast my own bullets from scrap lead. Burnt up another 250 rounds today that cost me a grand total of $16, (according to the load calculator i found), to make.
__________________
http://czfirearms.us/ same original CZForum, new location.
armoredman is offline  
Old October 19, 2012, 09:08 AM   #43
howlnmad
Senior Member
 
Join Date: April 29, 2009
Location: Harriman Tn
Posts: 413
I just enjoy the reloading proccess so I keep reloading and firing it until I lose it.
howlnmad is offline  
Old October 22, 2012, 05:03 PM   #44
thedaddycat
Senior Member
 
Join Date: September 25, 2011
Posts: 388
First off, sorry to anyone who sent me a PM or email about the brass. My son has been quite ill and now he has beem in the hospital for over a week so things around here have taken a back seat. He is showing some improvement to the point that he just got transfered out of the ICU so things are looking up on that account.

Here are a couple pics of some of my brass:



This is the 9mm brass. Left to right we have some old range brass with a dark patina, two bags of 500 fully prepped brass, decapped brass, and the two on the right are stuff that needs to get processed. I have not sorted the 9mm by headstamp. Once it is decapped I sonic clean it as this seems to do a fair job of getting the crud out of the case and primer pocket. I gave two bags of this brass to my friend so he has enough 9 mm brass to finish using up his components. Maybe I'll get the dies from him when he's done with them...



Here is some .45 Auto brass. All of it is fully prepped, that is to say it's been tumbled, decapped, sonic cleaned, and polished in the tumbler (with new media). I package these in zip-lock bags with 100 per bag, sorted by headstamp. I also gave my friend four bags of R-P brass and I still have 11 bags left of various head stamps. The small tub inside the tote in the lower left is bags of short-count brass sorted by headstamp. When I get enough of whichever brand to make a full bag, it goes with the others. That way I can load by lots of 100 using various primer/brass combinations.
thedaddycat is offline  
Old October 22, 2012, 09:23 PM   #45
okiefarmer
Senior Member
 
Join Date: February 20, 2006
Location: Oklahoma
Posts: 381
--as I cast my own bullets and buy powder & primers in bulk I spend 4 cents per rd to load 9mm. thats $2.00 per 50 and $40.00 per 1000.

if I could buy new loaded ammo for less I sure would!! --

Bizzactly biganimal. I cast for nearly everything. I send cast down x39, 30-30, '06, .308, not to mention 9mm, 38/357,40,45 and all those BP toyos to boot. Just a touch of lino, and LSSTUFF lube, and I don't have any problemmo. Savings really add up for the rifle calibers on cast. Smokes a bit at the range, but not enough to keep me from seeing the targets.

I pick up anything I ever see, but in the same motion, don't look just too awful hard for 9mm brass when shooting down in the pasture or the pond in the grass. Too cheap to buy vs. this old man bending over and throwing his back out.
okiefarmer is offline  
Old October 22, 2012, 10:45 PM   #46
lll Otto lll
Senior Member
 
Join Date: June 1, 2008
Location: Lone Star State
Posts: 163
A single 9mm casing is worth 3 cents, so why wouldn't you pick it up?
If you dropped a quarter on the ground, would you leave it there?
lll Otto lll is offline  
Old October 23, 2012, 07:02 AM   #47
res45
Senior Member
 
Join Date: September 15, 2007
Posts: 548
thedaddycat,hope your son continues to improve and gets to come home soon.
res45 is offline  
Old October 25, 2012, 08:00 AM   #48
donkee
Senior Member
 
Join Date: November 7, 2004
Location: Mid-Michigan
Posts: 431
I load 9mm and shoot it!

I am getting low on 9mm though. I have some .45 i should trade off for some or just buy it. I am not in a club any longer so I gon't get the pick up brass like I used to.
donkee is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.12040 seconds with 9 queries