AA 2 inch shotshell

c.j.sikes · October 2, 2012, 10:17 AM

i make a 2 inch shotshell out of reg. AA shell when they split at the crimp line, just cut them down and load with short wad and 3/4 oz. shot. i shat a lot of skeet with them. cjs

jaguarxk120 · October 2, 2012, 12:59 PM

Just think what your loading some people are paying $11 to $8.90 a box from Poly-Wad or Westly Richards (3/4oz, 1350MV).

Dave McC · October 2, 2012, 02:59 PM

The benefits of reloading are myriad.

I don't use my hulls up to that point, but I could.

TheKlawMan · October 2, 2012, 11:17 PM

What do you mean by a "short wad"? Forget it, I think I see what you mean. http://www.ballisticproducts.com/Sho...ctinfo/072SSW/

c.j.sikes · October 3, 2012, 10:14 AM

i ude the red AA wad and i ran across som same high wads at a gun show, no name on them but they work. all i did , i use a in line 266 pacific to load on, was shorten the crimp die by 1/2 inch, machinest cost me 5.00 , you can still load reg. by lowering die. cjs

Stevie-Ray · October 3, 2012, 07:52 PM

Quote:

i shat a lot of skeet

Yeeeeeouch!

Bill DeShivs · October 4, 2012, 02:23 PM

I'm still laughing!

Bill DeShivs · October 4, 2012, 08:56 PM

STILL laughing!

publius · October 18, 2012, 04:35 PM

I would be really interested to know your load.

scottd913 · October 18, 2012, 11:32 PM

Quote:

i shat a lot of skeet with them.

when i read that i thought i was going to shat a brick

i did however spew Dr.Pepper out my nose

October 2, 2012, 10:17 AM	#1
c.j.sikes Senior Member Join Date: March 21, 2006 Location: marlow okla Posts: 225	AA 2 inch shotshell i make a 2 inch shotshell out of reg. AA shell when they split at the crimp line, just cut them down and load with short wad and 3/4 oz. shot. i shat a lot of skeet with them. cjs

October 4, 2012, 02:23 PM	#7
Bill DeShivs Senior Member Join Date: April 7, 2006 Posts: 6,457	I'm still laughing! __________________ Bill DeShivs www.billdeshivs.com

October 4, 2012, 08:56 PM	#8
Bill DeShivs Senior Member Join Date: April 7, 2006 Posts: 6,457	STILL laughing! __________________ Bill DeShivs www.billdeshivs.com

October 18, 2012, 04:35 PM	#9
publius Senior Member Join Date: January 25, 2005 Location: Mississippi/Texas Posts: 2,349	I would be really interested to know your load. __________________ "Suppose you were an idiot, and suppose you were a member of Congress, but I repeat myself." Mark Twain

October 2, 2012, 12:59 PM	#2
jaguarxk120 Senior Member Join Date: February 28, 2008 Location: Michigan Posts: 1,681	Just think what your loading some people are paying $11 to $8.90 a box from Poly-Wad or Westly Richards (3/4oz, 1350MV).

October 2, 2012, 02:59 PM	#3
Dave McC Staff In Memoriam Join Date: October 14, 1999 Location: Columbia, Md, USA Posts: 8,831	The benefits of reloading are myriad. I don't use my hulls up to that point, but I could.

October 2, 2012, 11:17 PM	#4
TheKlawMan Junior member Join Date: June 23, 2009 Location: Orange County, CA Posts: 2,150	What do you mean by a "short wad"? Forget it, I think I see what you mean. http://www.ballisticproducts.com/Sho...ctinfo/072SSW/

October 3, 2012, 10:14 AM	#5
c.j.sikes Senior Member Join Date: March 21, 2006 Location: marlow okla Posts: 225	i ude the red AA wad and i ran across som same high wads at a gun show, no name on them but they work. all i did , i use a in line 266 pacific to load on, was shorten the crimp die by 1/2 inch, machinest cost me 5.00 , you can still load reg. by lowering die. cjs